• 제목/요약/키워드: Seismic Hazard

검색결과 427건 처리시간 0.032초

Temperature effect on seismic performance of CBFs equipped with SMA braces

  • Qiu, Canxing;Zhao, Xingnan
    • Smart Structures and Systems
    • /
    • 제22권5호
    • /
    • pp.495-508
    • /
    • 2018
  • Shape memory alloys (SMAs) exhibit superelasticity given the ambient temperature is above the austenite finish temperature threshold, the magnitude of which significantly depends on the metal ingredients though. For the monocrystalline CuAlBe SMAs, their superelasticity was found being maintained even when the ambient temperature is down to $-40^{\circ}C$. Thus this makes such SMAs particularly favorable for outdoor seismic applications, such as the framed structures located in cold regions with substantial temperature oscillation. Due to the thermo-mechanical coupling mechanism, the hysteretic properties of SMAs vary with temperature change, primarily including altered material strength and different damping. Thus, this study adopted the monocrystalline CuAlBe SMAs as the kernel component of the SMA braces. To quantify the seismic response characteristics at various temperatures, a wide temperature range from -40 to $40^{\circ}C$ are considered. The middle temperature, $0^{\circ}C$, is artificially selected to be the reference temperature in the performance comparisons, as well the corresponding material properties are used in the seismic design procedure. Both single-degree-of-freedom systems and a six-story braced frame were numerically analyzed by subjecting them to a suite of earthquake ground motions corresponding to the design basis hazard level. To the frame structures, the analytical results show that temperature variation generates minor influence on deformation and energy demands, whereas low temperatures help to reduce acceleration demands. Further, attributed to the excellent superelasticity of the monocrystalline CuAlBe SMAs, the frames successfully maintain recentering capability without leaving residual deformation upon considered earthquakes, even when the temperature is down to $-40^{\circ}C$.

Development of a displacement-based design approach for modern mixed RC-URM wall structures

  • Paparoa, Alessandro;Beyer, Katrin
    • Earthquakes and Structures
    • /
    • 제9권4호
    • /
    • pp.789-830
    • /
    • 2015
  • The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or replacing URM walls with RC walls. Of late, also several new construction projects have been conceived directly as buildings with both RC and URM walls. Despite the widespread use of such construction technique, very little is known about the seismic behaviour of mixed RC-URM wall structures and codes do not provide adequate support to designers. The aim of the paper is therefore to propose a displacement-based design methodology for the design of mixed RC-URM edifices and the retrofit of URM buildings by replacing or adding selected URM walls with RC ones. The article describes also two tools developed for estimating important quantities relevant for the displacement-based design of structures with both RC and URM walls. The tools are (i) a mechanical model based on the shear-flexure interaction between URM and RC walls and (ii) an elastic model for estimating the contribution of the RC slabs to the overturning moment capacity of the system. In the last part of the article the proposed design method is verified through nonlinear dynamic analyses of several case studies. These results show that the proposed design approach has the ability of controlling the displacement profile of the designed structures, avoiding concentration of deformations in one single storey, a typical feature of URM wall structures.

한반도 주요 지체구조구별 지진학적 특성 (Seismic Characteristics of Tectonic Provinces of the Korean Peninsula)

  • 이기화;김정기
    • 지구물리
    • /
    • 제3권2호
    • /
    • pp.91-98
    • /
    • 2000
  • 한반도의 지진활동은 시공적으로 매우 불규칙한 판내부 지진활동의 전형적 특성을 보여준다. 한반도는 지질학적으로 구조 및 특성이 다른 여러 개의 지체구조구로 나누어지며 본 연구에서는 각 지체구조구의 지진활동의 특성의 차이를 규명하기 위하여 한반도의 역사 및 계기 지진자료를 이용하여 각 지체구조구의 지진활동변수를 추정하였다. 조선시대 이전의 불완전한 지진자료와 그 이후의 완전한 지진자료에 대한 통계적 분석은 지체구조구들 사이에 지진활동의 특성에 현저한 차이가 나지 않음을 보였다. 한반도 전체로서 진도-빈도의 b값은 대략 0.6 이며, 최대 지진은 MMI X 정도이다. 본 연구결과는 한반도의 확률론적 지진재해도 분석과 내진 공학에서 설계지진의 평가에 유용하게 이용될 수 있다.

  • PDF

Retrofitting of vulnerable RC structures by base isolation technique

  • Islam, A.B.M. Saiful;Jumaat, Mohd Zamin;Ahmmad, Rasel;Darain, Kh. Mahfuz ud
    • Earthquakes and Structures
    • /
    • 제9권3호
    • /
    • pp.603-623
    • /
    • 2015
  • The scale and nature of the recent earthquakes in the world and the related earthquake disaster index coerce the concerned community to become anxious about it. Therefore, it is crucial that seismic lateral load effect will be appropriately considered in structural design. Application of seismic isolation system stands as a consistent alternative against this hazard. The objective of the study is to evaluate the structural and economic feasibility of reinforced concrete (RC) buildings with base isolation located in medium risk seismic region. Linear and nonlinear dynamic analyses as well as linear static analysis under site-specific bi-directional seismic excitation have been carried out for both fixed based (FB) and base isolated (BI) buildings in the present study. The superstructure and base of buildings are modeled in a 3D finite element model by consistent mass approach having six degrees of freedom at each node. The floor slabs are simulated as rigid diaphragms. Lead rubber bearing (LRB) and High damping rubber bearing (HDRB) are used as isolation device. Change of structural behaviors and savings in construction costing are evaluated. The study shows that for low to medium rise buildings, isolators can reduce muscular amount of base shears, base moments and floor accelerations for building at soft to medium stiff soil. Allowable higher horizontal displacement induces structural flexibility. Though incorporating isolator increases the outlay, overall structural cost may be reduced. The application of base isolation system confirms a potential to be used as a viable solution in economic building design.

단자유도계 구조물의 로그정규분포 지진응답 특성 (A Property of Seismic Response with Log-normal Distribution at SDOF Structure)

  • 정연인;김군찬;최민호
    • 한국융합학회논문지
    • /
    • 제10권11호
    • /
    • pp.303-308
    • /
    • 2019
  • 본 연구에서는 지진하중에 대한 구조물의 동적해석 과정에서 실제적이고 신뢰성 있는 확률 통계적 지진응답 결과를 얻기 위해 로그정규분포 기반 지진응답 도출 방안을 제안하였다. 이를 위해 미국지질조사국(USGS)에서 제시한 로스앤젤레스 지역 지진재해도에 따라 50년 동안의 발생 초과확률이 2%, 5%, 10%인 30개 지진데이터들을 활용하였다. 해석 대상으로서는 기본적인 동적거동 파악을 위해 단자유도계를 선정, 이의 고유진동주기 별 응답을 나타내는 응답 스팩트럼을 도식하여 응답 추이를 분석하였다. 최종적으로 도출된 로그정규분포 기반 응답의 경우 기존의 정규분포 기반 응답에 비해 모든 고유주기 영역에서 상대적으로 낮은 응답을 보였다. 제안된 로그정규분포 기반의 지진응답 평가는 성능기반내진설계를 위한 경제적 평가 방식으로서의 대안이 될 수 있을 것으로 기대된다.

Akaike Information Criterion (AIC)를 이용한 경산 지진관측소 P파와 S파 도착시간 자동추정 (Onset Time Estimation of P- and S-waves at Gyeongsan Seismic Station Using Akaike Information Criterion (AIC))

  • 권조아;강수영;김광희
    • 한국지구과학회지
    • /
    • 제39권6호
    • /
    • pp.593-599
    • /
    • 2018
  • P파와 S파의 도착시간 정보는 지진 발생위치 결정, 1차원 및 3차원 지하구조 등 지진학 연구 수행에 중요한 정보이다. 최근 지진관측소의 수가 비약적으로 증가함에 따라 관측망을 운영하면서 수동으로 지진파의 도착시간을 측정하는 것은 상당한 시간이 소요되는 일이 되었다. 본 연구에서는 진원요소에 대한 사전정보(지진 발생위치와 시간)를 확보할 수 있는 경우 Akaike Information Criterion (AIC)을 적용하여 추가의 관측소에서 국지지진의 P파와 S파의 도착시간을 자동측정하였다. 해당 방법을 경산(DAG2) 지진관측소에 기록된 자료에 적용한 후 수동 측정한 값과 자동 측정한 값을 비교한 결과 P파의 경우 95.1%, S파의 경우 93.7%가 0.1초 이하의 차이를 보이면서 결정되는 것을 확인하였다. 자동측정결과의 높은 정확성은 향후 고밀도 지진관측망 운영에 성공적으로 적용될 수 있음을 시사한다.

Lifetime seismic performance assessment of high-rise steel-concrete composite frame with buckling-restrained braces under wind-induced fatigue

  • Liu, Yang;Li, Hong-Nan;Li, Chao;Dong, Tian-Ze
    • Structural Engineering and Mechanics
    • /
    • 제77권2호
    • /
    • pp.197-215
    • /
    • 2021
  • Under a severe environment of multiple hazards such as earthquakes and winds, the life-cycle performance of engineering structures may inevitably be deteriorated due to the fatigue effect caused by long-term exposure to wind loads, which would further increase the structural vulnerability to earthquakes. This paper presents a framework for evaluating the lifetime structural seismic performance under the effect of wind-induced fatigue considering different sources of uncertainties. The seismic behavior of a high-rise steel-concrete composite frame with buckling-restrained braces (FBRB) during its service life is systematically investigated using the proposed approach. Recorded field data for the wind hazard of Fuzhou, Fujian Province of China from Jan. 1, 1980 to Mar. 31, 2019 is collected, based on which the distribution of wind velocity is constructed by the Gumbel model after comparisons. The OpenSees platform is employed to establish the numerical model of the FBRB and conduct subsequent numerical computations. Allowed for the uncertainties caused by the wind generation and structural modeling, the final annual fatigue damage takes the average of 50 groups of simulations. The lifetime structural performance assessments, including static pushover analyses, nonlinear dynamic time history analyses and fragility analyses, are conducted on the time-dependent finite element (FE) models which are modified in lines with the material deterioration models. The results indicate that the structural performance tends to degrade over time under the effect of fatigue, while the influencing degree of fatigue varies with the duration time of fatigue process and seismic intensity. The impact of wind-induced fatigue on structural responses and fragilities are explicitly quantified and discussed in details.

GIS 기반 지반공간정보 추정을 통한 부지고유 지진응답 매개변수 기반 인천 지역의 부지분류 (Site Classification for Incheon According to Site-Specific Seismic Response Parameters by Estimating Geotechnical Spatial Information Based on GIS)

  • 선창국;김한샘
    • 한국지리정보학회지
    • /
    • 제19권4호
    • /
    • pp.17-35
    • /
    • 2016
  • 지진으로 인한 재난은 지반운동의 증폭과 관련된 부지효과의 차이로 인해 흔히 견고한 토사나 암반에 비해 연약한 토사 지역에서 심하게 나타나고 있다. 지역적 관점에서 이러한 차이는 대상 영역 전체의 토사 지층 분포의 예측을 통해 우선 파악할 수 있다. 토사는 대개 내륙에 비해 강이나 해안 주변에서 두껍게 발달하고 있다. 본 연구에서는 해안 대도시 인천을 대상으로 부지효과를 평가하고 지진재해 정보를 제공하고자, 연구 영역 전체의 지반지층에 대해 GIS 기반의 공간예측을 수행하였다. 약 7,000 여공의 기존 시추조사 자료를 수집하여 GIS DB로 구축하였으며, 추가적으로 현장답사를 통해 지표지반 자료들을 확보하였다. 구축된 지반 DB를 토대로 부지고유 지진응답 매개변수들에 관한 공간구역화 지도들을 지역 지진대책에서의 활용을 위해 제시하였다. 지반지진공학 매개변수별 공간 구역화 수행을 통해 인천 확장영역의 지진위험도를 평가하고, 부지분류 구역정보를 도출함으로써 내진설계의 부지증폭계수를 결정하였다. 이 때 대상 영역 전체에 걸쳐 부지분류에 관한 공간구역화를 부지응답 매개변수별로 수행하고 각 매개변수별 공간분포를 비교하였다. 이에 따라 인천 행정 단위별로 부지주기의 공간구역화를 수행하였으며, 지반지진공학적 취약부지를 평가함으로써 해안 대도시에서의 지진재해 저감을 위한 의사결정 지원의 활용가능성을 확인하였다.

연구용 원자로에 대한 지진 확률론적 안전성 평가 연구 (A Study on Seismic Probabilistic Safety Assessment for a Research Reactor)

  • 오진호;곽신영
    • 한국전산구조공학회논문집
    • /
    • 제31권1호
    • /
    • pp.31-38
    • /
    • 2018
  • 설계기준을 초과하는 지진 재해는 원자력 시설물에 상당한 위험을 유발할 수 있다. 이러한 위험성을 확률론적으로 정량화하는 방법이 확률론적 지진 안전성 평가(seismic probabilistic safety assessment)이다. 이에 따라 지진 PSA는 국내외 다수의 원자력 발전소에 적용되어 지진 재해에 대한 원전의 안전성을 확률론적으로 평가하고 이에 대비토록 하고 있다. 그러나 원전에 비해 상대적으로 규모가 작은 연구용 원자로와 같은 경우에는 지진 PSA가 적용된 예가 거의 없다. 따라서, 본 연구에서는 지진 PSA기법을 실제 완공된 연구로에 적용하여 안전성을 분석하였다. 또한, 이를 바탕으로 연구로를 구성하는 시스템의 지진 내력에 대한 최적화 연구를 수행하였다. 그 결과, 지진 재해 하에서 연구로에 발생할 수 있는 노심 손상 가능성을 정량화하였고, 현재 설계안과 비교하여 적은 비용으로 최대의 안전성을 확보하는 최적 지진 내력 분포를 도출하였다. 이러한 결과는 향후 지진에 대비하여 연구로 안전성을 효과적으로 제고할 수 있는 정량적 지표로 활용할 수 있을 것으로 판단된다.

변위연성도 기반 철근콘크리트 교각의 한정연성 내진 설계법과 성능평가 방법 (Limited-Ductile Seismic Design and Performance Assessment Method of RC Bridge Piers Based on Displacement Ductility)

  • 박창규;정영수;이대형
    • 콘크리트학회논문집
    • /
    • 제19권1호
    • /
    • pp.19-26
    • /
    • 2007
  • 최근까지 우리나라는 활성단층으로부터 멀리 떨어져 있기 때문에 지진에 대하여 안전지대라 여기었다. 그러나 최근의 강진으로 인간의 생명과 국가 경제에 막대한 손실을 발생시킨다는 것을 인지하게되었다. 따라서 최근에는 사회기간시설물에 대한 내지설계의 중요성이 부각되고 있다. 본 연구에서는 82개 원형단면과 54개의 사각단면의 철근콘크리트 교각에 대한 국내외의 실험 결과를 이용하여 철근콘크리트 교각의 내진설계와 성능평가에 대한 새로운 방법을 제안하였다. 제안된 새로운 내진설계법은 중저진지역에 속하는 우리나라의 실정에 맞도록 한정연성설계 개념을 도입하였다. 또한 우리나라의 철근콘크리트 교각의 내진성능에 있어 중요한 점은 1992년 내지설계규정이 도입되기 이전에 시공된 교각들의 내진성능 확보이다. 따라서 제안된 철근콘크리트 교각의 내진성능평가식은 기존 교각들의 내진 보수 및 보강 방안을 선정하는데 유익하게 사용될 수 있으리라 판단된다.