• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.143-151
• /
• 2006

Currently, there are researches about environment-friendly road construction plans led by the Ministry of Construction and Transportation in progress. Therefore, in order to create the revegetation techniques of thin layer-soil combination media hydroseeding measures by actively using native herbs and native woody plants instead of using imported foreign grasses as a concept of sustainable environment-friendly land development, this thesis is going to identify problems that can appear when applying the thin- layer-soil-media hydroseeding measures by the suggested in the "Slope revegetation design and guidelines" proposed by the Ministry of Construction and Transportation, and to propose improvement plans for the problems.To this aim, a seeding mixture selection test was conducted by the goal of slope restoration, and a test group for artificial slope was created. As for a test for June sowing, it was intended to identify appropriate combination quantity by conducting a test that differentiates the combination quantity, and as for a test for September sowing, an artificial slope test was conducted by creating an artificial bank for earth and soil and applying 1~2cm and 3~4cm thickness after differentiating the seed combination volume and slope aspects.

• Journal of the Korean Ceramic Society
• /
• v.26 no.5
• /
• pp.682-690
• /
• 1989

Fine mullite powder was prepared by colloidal sol-gel route. Boehmite as a starting material of Al2O3 and silica sol or fumed silica as a starting material of SiO2 were used. $\alpha$-Al2O3, TiO2 and ZrO2 were used as seeding materials. The combination of boehmite and silica was found to be the stoichiometric mullite powder. Techniques for drying used were spray drying, freeze drying, reduced pressure evaporation and drying in a oven. The gelled powder was heated at 130$0^{\circ}C$ for 100min and was attrition-milled for 1~3hrs. The mullite powder obtained was composed of submicrometer, uniform and spherical particles with a narrow size distribution. The mullite powder was characterized by BET, SEM, XRD and IR spectroscopy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.30-38
• /
• 1996

A PIV system consisting of an image board slit into personal computer and 2-D sheet light projector is developed and related techniques to improve its performance are discussed. A grey-level cross correlation method capable of overcoming particle seeding limitation is suggested. And a sub-pixed interpolation method in determining the vector terminal is preposed by considering 8-neighbours correlation distributing patterns. Furthermore, pressure estimation from the acquired velocity vectors by applying the Poisson equation is persented with reasonable feasibility. As a practical application of the present system, evaporator flows are analysed and attained instantaneous velocity vectors reveal that the flow phenomena maintain turbulent fluctuation.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.157-163
• /
• 2006

A new technique utilizing LII signal for the measurement of flow velocities of laminar diffusion flames has been investigated. Soot particles in ethylene diffusion flames are heated by a modulated Ar-ion laser beam. LII signals and their phase angles are measured using a lock-in amplifier at the different flame heights and the axial flow velocity are obtained from the measured phase angle delay. The measured velocities are similar to those from LDV measurements under the same operating conditions. The effects of laser power, LII signal wavelength, and modulation frequency are not sensitive to the velocity measurement. However, the choice of an optical chopper blade type could affect the measurement result. The use of a 6/5 chopper blade showed the better result that is possibly due to the square shape of modulated laser beam. This study successfully demonstrated that axial flow velocities of laminar diffusion flames can be measured by a new technique utilizing LII signal, which does not need particle seeding unlikely to LDV or PIV techniques.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.499-502
• /
• 2014

This paper presents a comparison study between simulation and experiment for fault diagnostics of a spur gear. In simulation, fault diagnostics using transmission error (TE) was performed and concluded to be valid. In a real experiment, however, it is not as easy to detect faults of gears using TE as in simulation. In this paper, after seeding the various faults like tooth crack of different length, tooth breakage and spalling in test rig, TE was calculated. Then, several signal processing techniques were performed to overcome the limitations of an experiment in detecting the fault signals of TE. After signal processing, we could detect the various faults of spur gears and different amplitude of TE sparks from cracks of different length. Then we discussed the difference between simulation and experment.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2005.11a
• /
• pp.110-112
• /
• 2005

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.373-376
• /
• 2016

Transition metal dichalcogenides (TMDs) such as $MoS_2$ is the thinnest semiconductor, exhibits promising prospects in the applications of optoelectronics, catalysis and hydrogen storage devices. Uniform and high quality $MoS_2$ is highly desirable in large area for its applications on commercial scale and fundamental research. Many experimental techniques i.e CVD have been developed to successfully synthesis $MoS_2$ on large scale, here in this work atomistic detail to understand the growth mechanism is addressed which was greatly overlooked. Here based on first principles calculation we found that polarity of seeding promter (crystal violet considerd in this work) controls the growth mechanism. It is also found that molybdenum destroys the precursor while sulfur adsorption with precursor is favorable.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.100.1-100.1
• /
• 2003

Tissue engineering has arisen to address the extreme shortage of tissues and organs for transplantation and repair. One of the most successful techniques has been the seeding and culturing cells on three-dimensional biodegradable scaffolds in vitro followed by implantaion in vivo. We used PLA and PLGA as biodegradable polymers and rabbit chondrocytes were isolated and applied to PLA and PLGA to make artificial cartilage. To evaluate the biocompatibility and biological safety of polymers, in vitro cytotoxicity and in vivo animal tests were investigated. (omitted)

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.86-92
• /
• 1992

Green buckwheat seedlings have been used as a pollution free vegetable and medicinal crop for a long time. Some of the reasons are the rapid growth rate, the high protein and rutincontent, and a more favorable ratio of leaf to stem than mature plants. Off-crop season cultivation techniques were developed for growing the young and green buckwheat vegetable of higher quality and yield, and for its increased value-added income. The effects of planting season, seeding rate, seed bed soil fertility and type, and seedling growth period on yield and rutin content were determined for vegetable and medicinal use. The young vegetable yields. in the off season culture ranged from 2.62t/ha to 22.7t /ha. The highest vegetable yield was 22.7t /ha for 25 days old seedlings grown in the polyethylene film tunnel from March 30 to April 25, 1991 where seedling rate was 360kg /ha. Buckwheat vegetable quality and income were dependent upon planting season, seeding rate, growing duration and temperature, and facilities of raising seedlings. Protein content of buck-wheat seedlings was from 21.5% to 17.2%. Rutin content of the vegetable was 53.9～31.7mg /100g for the whole plant in average. The protein and rutin content was significantly varied due to the different environmental conditions including fertility and type of seed bed soil, growing duration, temperature of the green house, and polyethylene film house and tunnel.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.4
• /
• pp.195-206
• /
• 2019

This experiment was carried out to study the effects of different environmental conditions and cultivation techniques on productivity of forage corn in central and southern area of Korea on 2017 and 2018. Average dry matter yield of forage corn at 34 cultivation regions was 13,510kg/ha. Forage productivity of forage corn cultivated at actual production sites have positive correlation with cultivation techniques(p<0.01) but not correlated with cultivation environments. Forage productivity of forage corn have positive correlation with seeding techniques(p<0.01) but not correlated with fertilization techniques. These results suggest that practices of cultivation techniques are more important than cultivation environments for increasing the forage productivity of forage corn. Therefore, yield prediction techniques of forage corn in Korea have to be considered the practices of cultivation techniques along with soil and climate conditions.