• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2004년도 춘계 학술대회지
• /
• pp.218-219
• /
• 2004

• Journal of Biosystems Engineering
• /
• 제37권6호
• /
• pp.335-341
• /
• 2012

Purpose: While an unmanned helicopter has been extensively used for spraying chemicals on agricultural crops, its low utilization (two months per year from July to August) has recently become an issue. This study aimed to increase the utilization of the unmanned helicopter. The centrifugal rice seeder, a mounting device for rice seeding for unmanned helicopter was developed and assessed its performance. Methods: The concept of the centrifugal spraying device was to obtain design criteria for centrifugal distribution. Four types of blade shapes namely straight, curved, straight wing and curved wing were developed and used. The rotational speed of the blades was tested at 1,000, 1,200 and 1,400 rpm. Results: The blade shapes, rotational blade speed and angle of trajectory were theoretically analyzed and results were validated with a series of laboratory experiments. Conclusions: The curved wing blades provided the distribution uniformity (DU) at 1,200rpm of rotational speed and 60 degree of seed drop point. The spray uniformity of 4.2% was also achieved.

• 한국약용작물학회지
• /
• 제5권3호
• /
• pp.225-231
• /
• 1997

농가에 보급(普及)되어 있는 농기계(農機械)의 이용효율(利用效率)를 높이고 생산비(生毒費) 절감(節減)을 통한 농가소득(農家所得)을 증대(增大)시키기 위해 경운기부착세조파기 (수도용직파기)를 이용하여 파종(播種)은 4월20일, 5월5일, 5월20일, 6월5일에 하였고, 재식밀도(栽植密度)는 $60{\times}15cm,\;70{\times}15cm,\;80{\times}15cm$가 되도록 파종기의 파종부위(播種部位)를 조절하여 시험을 수행한 결과는 다음과 같다. 1. 파종시기(播種時期)가 늦어질수록 율무의 출아(出芽) 및 개화(開花) 소요일수(所要日數)는 단축(短縮)되었으나, 성숙소요일수(成熟所要日數)는 연장(延長) 되는 경향이었다. 전생육기간(全生育期間)은 $159{\sim}l55$일이 소요(所要)되었다. 2. 생육시기별(生育時期別) 적산온도(積算溫度)는 생육(生育)단계별 소요일수(所要日數)와 같은 경향이었으며, 전생육기간(全生育期間)의 적산온도(積算溫度)는 $3,592.5{\sim}3,459.6^{\circ}C$였다. 3. $m^2$당 입모수(立毛數)는 파종시기간(播種時期間)에는 대차(大差)없었으나, 재식밀도간(栽植密度間)에는 소식(疎植)일수록 유의(有意)한 차(差)를 보였다. 4. 생육형질(生育形質)은 파종시기간(播種時期間)에는 간장(稈長)만이 6월5일 파종(播種)이 182.9cm로 유의(有意)하게 짧았으나, 재식밀도간(栽植密度間)에는 유의(有意)한 차(差)를 보이지 않았다. 5. 10a당(當) 수량(收量)은 파종시기간(播種時期間)에는 6월5일 파종(播種)만이 유의(有意)하게 감수(減收)하였으나, 재식밀도간(栽植密度間)에는 뚜렷한 차이는 없었다. 6. 생육단계별(生育段階別) 소요일수(所要日數)와 수량형질간(收量形質間)에서 개화(開花) 소요일수(所要日數)는 1,000입중(粒重)과 고도(高度)의 부(負)의 상관(相關)을, 등숙율(登熟率) 및 종실중간(種實重間)에는 정(正)의 상관(相關)을 보였고, 성숙소요일수(成熟所要日數)는 등숙율(登熟率)과 고도(高度)의 정(正)의 상관(相關)을 보였다.

• 한국잡초학회지
• /
• 제12권3호
• /
• pp.200-222
• /
• 1992

The results of recent researches for improvement of seedling stand in direct seeded rice on the dry paddy in Korea were summarized as the following ; a variety to be cultivated should be chosen the characteristics of high percentage germination under low temperature, shorter period of shoot emergence, and better growth of the mesocotyl and shoots. Meanwhile, there was 40% increase in seedling stand at the treatment of removal of the seed awn under using the drill seeder. After seeding the rice seed covered with soil of 3cm depth was better seedling emergence and also there was the hightest seedling emergence at the 70% of moisture content of the soil. In addition, the application of the Release containing GA 10% enabled to increase the seedling stand and furthermore it was effective under deep seeding depth. The optimum seeding date should be seeded around May 10 when mean air temperature is above 12-13$^{\circ}C$ so that may establish more less 70% in seedling stand. Based on an appropriate seedling stand of 150/$m^2$, the optimum seeding rate was 5kg/10a. It was the best in seeding method using drill seeder and the most desirable recommended seeding method was the drill seeder in terms of seedling stand. In order to improve seedling stand water management was more effective in canal irrigation and in drainage at 6hr after irrigation following by the seeding process. On the other hand, for the increase of seedling stand under flooded condition a variety might have characters being better germination at low concentration of dissolved oxygen and vertically deeper growing of the crown root. Also, seedling stand was able to increase with the seed coating of $CaO_2$in the flooded soil. It was possible to be seeded on the early part of May being mean air temperature of avove 10$^{\circ}C$ and the optimum seeding rate was 5kg/10a. For an effective water management water would be flooded up to 3cm depth for 2-3 weeks after seeding. The rice plant grown under the direct seeded cultivation might be not so much strong in lodging resistance compared to that grown under the transplanting and moreover direct seeded rice cultivation under flooded condition would be more weak growth of the rice plant than that on dry paddy. Meanwhile, the lodging would be affected by the seeding rate, the soil depth after seeding. and seeding method even in the same variety. In particular, roots in the lodging pattern of direct seeded rice cultivation under flooded condition were largely distributed on the soil surface so that resulted easily in the lodging. In general, the lodging resistance would be greater as seeding rate and amount of N fertilizer application are lower and soil depth after seeding is higher. Among the introduction of different seeding method the high ridged drill seeding method on dry paddy soil resulted in the lowest in the lodging index and also it was lower in the drill seeding method than in the scattering seeding method under flooded condition. In case of more than 150 seedlings per $m^2$ there was a severe lodging due to high lodging index at the 3rd and 4th internodes. The effective lodging prevention was able to at the treatment of the Inabenfide at 45 days before heading and the Uniconazol at 15 days before heading which caused the shortage by 10-15cm in culm length. Also, fertilizer management using split application of nitrogen would be contributed the reduction of lodging at the rate of 20-30-20-20-10%(basal-5th leaf stage-7th leaf stage-panicle initiation stage-heading stage) on the dry paddy soil.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 동계 학술대회 논문집
• /
• pp.418-422
• /
• 2003

농가에서는 재배하고 있는 과채류는 접목하지 않은 실생묘를 육묘하여 사용하거나 공정육묘장에서 실생묘 혹은 접목묘를 구입하여 사용하고 있으며, 특히 접목묘의 경우는 거의 대부분 공정육묘장에서 육묘된 모를 사용하고 있다. 수박, 오이, 참외의 박과채소는 연작장해의 피해를 줄이고 만할병을 방지하며 저온신장을 도모하기 위해서 접목재배를 많이 실시하고 있다. 또한 터널이나 노지 재배의 경우에는 접목을 하게되면 내습성을 높일 수 있다. 참외의 경우에는 세근이 많이 발달하지만 흡비력이 약하다. 그러나 대목으로 쓰이는 호박은 뿌리의 발달이 왕성할 뿐만 아니라 흡비력이 강하다. (중략)

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2003년도 추계 학술발표회 요지
• /
• pp.166-167
• /
• 2003

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.761-767
• /
• 1993

A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2002년도 하계 학술대회 논문집
• /
• pp.84-89
• /
• 2002

소규모의 채소재배농가에서 육묘포트에 종자를 파종하는 작업은 대부분 손으로 파종하고 있으며, 중규모 이상의 채소재배농가에서는 간이파종기를 이용하거나 육묘공장에서 모를 구입하여 사용하고 있다. 간이파종기는 진공흡인력을 이용하는 종자흡인식과 평판의 구멍에 종자를 가두어놓았다가 낙하시키는 구멍배종방식 등이 주로 이용되고 있다(한국농업기계학회, 1998). 간이파종기는 대부분 플러그 육묘트레이에 사용할 수 있도록 되어 있으며, 포트수가 다른 플러그 육묘트레이를 사용하려면 새로운 포트규격에 맞는 파종장치를 구입하여야 하기 때문에 추가비용이 소요된다. 소규모 채소재배농가에서는 25, 36, 49공 등의 여러 가지 규격의 연결포트를 사용하고 영농규모가 작기 때문에 간이파종기를 구입하는 것이 부담스러운 실정이다. (중략)

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.163-176
• /
• 1997

Sesame was one of the economical crops in Korea. However, cultivation area of sesame has been decreasing rapidly due to the lack of mechanization for this crop and the opening of agricultural product market. Sesame seed is so small that ordinary seeder can not seed properly. In rural practice, farmers seed sesame with hand and do thinning after shoot emerges. Seeding and thinning in sesame cultivation take more than 40% of total labor To reduce labor in seeding and thinning, a pellet seed machine for sesame has been developed. The pellet seed machine is very simple in structure. It utilizes the chemical reaction between alginate solution and $CaCl_2$. Two material forms a membrane when they meet The uniqueness of the pellet seed machine for sesame were 1) a counter rotating roller for metering the mixture of activated carbon and alginate and 2) swinging plate for submerging seed into the mixture. The prototype machine can produce 30, 000 pellets per hour and costs ￦6, 891 per 1 km sesame.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.22-33
• /
• 1978

To maintain the self-sufficiency of food production , it is required to improved the productivity and increase the effective utilization of land in the double cropping areas using improved cultivation technology. The following reasons encourage this cours of action because the overlapping rice harvest and barely seeding seasons complete for labour, the lower price of barley makes it financially less attractive to grow and these two facts together are responsible for a decrease in barley being planted in certain more seasonably marginal double cropping areas. Fro these reasons, it is desirable to carry out tests to improve the current cultivation techniques . In this interest , the following studies were carried out in the experimental field located at Banweol-myeon, Whasung-jkun, Gyeonggi-do from October 1977 to July 1978 in order to establish the mechanical method of barley cultivation using the power tiller. The summarized results are as follows. 1. The work performance in the seeding operation using the rotary barley seeder was 68 minutes per 10 ares which compares favourably with 408 min/10a using the conventional method. This is only one sixth of the time required by th conventional method. The operating costs using the rotary barley seeder was 1, 463 won per 10 areas as against 3, 486 Won per 10 ares for the conventional method, showing a saving of about 50% in comparison with the conventional method. 2. In the manure spreading operation, the work performance was 25 min/10a for the manure spreading machine , compared to 1089 min/10a for the manual operations. This is about one fourth of the time required by the conventional method, The operating costs were 810 Won/10a for the machine and 857 Won/10a for the manual labour. This cost shows little advantage by the machine over the manual labor costs. The conventional method of manure spreading will continue pending decision which will develope and improve the machine.3. Work performance in the rolling operation using the barley rolIer was 30 min/lOa which compares favourably with 135 min/10a using conventional method. This was one fourth of the time required by the conventional method. The operating costs were 514 Won/103. for the machine and 1, 003 Won/lOa for manual labour. In the weed control operation, the work performance and operating costs were 45min/lOa, 1, 399won/10a for the herbcide application using the power sprayer, 1, 149min/10a 8, 541won/lOa for the conventional method respectively. This is 26 times higher efficiency in comparison to the conventional method. 4. In the harvesting operation using the reaper binder and tiller attachment, the work performance was 60min/lOa and represents a cost of 2, 039won/10a. The con\ulcornerventional method took 640min/10a at a cost of 4, 757won/lOa. The reaper binder showns a saving of one tenth over the conventional method. The automatic thresher is already recommended for the current situations, and is now being used. 5. From a comparison of the results of the above trials, the serial cultivation system using the attachment for the power tiller such as the rotary barley seeder is now to be recommended for the current barley cultivation system. It is also recommend from these results that the mechanized technology now available must be used to improve and maintain the increase in barley production. It is seen th1t this is the only course now avaihble to solve the peak seasonal requirements of labour needed for l11rvesting and seeding between rice and barley cultivation.