• Plant Resources
• /
• v.8 no.2
• /
• pp.91-95
• /
• 2005

In spring, to determine the optimal planting date and plant density of rapeseed in southern areas of Korea. $Taiwan^{\#1}$ variety for spring sowing, the highest yielding variety was grown under five different planting date and plant density. Yield components such as plant height, ear length, number of seedling stand per $m^2$, number of per ear and seed set percentage were highest at the plots with Mar. 5 of planting date and 50/20cm drilling of plant density. Yield of seed, oil, gas and 1,000 grains weight and erucic acid content were highest at the Mar. 5 of planting date and 50/20cm drilling of plant density. Judging from the results reported above, at optimum planting date and plant density of rapeseed seemed too be Mar. 5 of planting date and 50/20cm plant density in spring sowing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.361-366
• /
• 2017

This study was conducted to evaluate effects of seeding rate and depth during broadcast sowing on growth and yield of foxtail millet and proso millet over 2 years. The rate of sowing seeds was adjusted to 5, 7, 10 and 20 kg per ha on foxtail millet, and 5, 10, 15 and 30 kg per ha for proso millet. Sowing depth was 0.5, 1, 3, 5, 7, and 10 cm used tractor rotary attachment for shallow-tilling. The rate of seedlings standing when foxtail millet and proso millet were sowed to a depth of 0.5~5 cm was 72.0~78.0% and 73.0~80.5%, respectively. Plant height and weight at the three-leaf stage after emergence was highest for the treatment with 3 cm rotary depth. As the rate of broadcast seed sowing increased, plant length, diameter, seed length, and seeds on the panicle decreased. The grain yield of foxtail millet was highest with broadcast seed sowing of 10 kg per ha (3652, $3977kg\;ha^{-1}$) and proso millet was highest at broadcast seed sowing of 15 kg per ha (2226, $2052kg\;ha^{-1}$) in 2012 and 2013, respectively. Therefore, the optimum rate of sowed seeds under broadcast cultivation was $10kg\;ha^{-1}$ for foxtail millet and $15kg\;per\;ha^{-1}$ for proso millet. Optimum sowing depth for foxtail and proso millet under broadcast cultivation was 3 cm, using a rotary tractor attachment for shallow-tilling.

• The Korean Journal of Food & Health Convergence
• /
• v.6 no.1
• /
• pp.17-20
• /
• 2020

Wheat is the most abundant crop in the world, accounting for one third of the world's population diet. In Ukraine, wheat is in fact, in addition to its nutritional value, a national symbol of the state. Therefore, the main thesis on the development of modern plant growing in Ukraine is the reduction of costs and the introduction of innovative technologies. The quality of grain and seed depends on many factors, namely: agro-climatic conditions, sowing condition of the seed material, quality characteristics of the soil, yielding properties of seeds, pre-sowing seed treatment. etc. For this purpose, the photosynthesis and intensity of photosynthesis need to be limited to the width of the leaf and the height of the leaves by a smaller cut of the stem. It is extremely important to ensure that the head and side pagons of wheat are in good condition. All parameters are often secured by the technology of grain preparation before delivery. Prior to this technology, it is possible to introduce processing of the material in the form for the development of the material. This article presents the effectiveness of the use of infrared irradiation for the pre-sowing treatment of winter wheat seeds in Sekobra Research, Germany.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.91-98
• /
• 1994

Planting, transplanting, and harvesting are important processes for the successful production of farm products in Korea because those require the high labor intensity during limitted period. Recently, many researches of using automatic control with a microcomputer are carried in the agricultural field, but are not much spread to the seeder development. Automatic sowing technology would be much attractive if there was a way to assure that each seed was count accurately in the seed metering device. Thus, an automatic seed metering device was designed and constructed to be controlled by microcomputer. This device could be improved in not only counting the number of seeds in but also sowing seeds between row spacings. Automatic seed metering device consisted of conveyor belt and temporary storage device. Performance of seed metering device depends on the apparatus including sensor, stepping motor and DC-solenoid. Research contents and results are summarized as follows. 1. The seed metering device involving seed hopper, sorter and temporary storage device was designed and constructed. 2. A seed counting system with six photo electric sensors, designed and built for this project, was adequate for tranferring and counting seeds accurately. 3. Operating algorithm for stepping motor and photo electric DC-solenoid was developed. The Seed metering device proved to be a smooth and accurate operating device using the algorithm. 4. The performance of second prototype metering device was examined with five kinds of seeds ; mung beans, red beans, white beans, black beans and corn to transfer and count the seeds. The error ratio of seed metering was less than 3.5%.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.102-102
• /
• 2022

More than 74% of forage crops in Korea are cultivated in winter rice fields. Italian ryegrass (IRG) can be said to be a representative forage crop, but over 70% of its seeds are dependent on imports. In addition, there are concerns that the stable supply of research fees may be disrupted due to the effects of climate change, war, and other factors. Therefore, it is necessary to secure a large production area for stable supply. Korea's reclaimed land area is 135,000 ha and its agricultural area is 112,000 ha. Therefore, this study attempted to apply IRG to the domestic IRG seed industry through stable cultivation techniques on reclaimed land. In this study, IRG 'Kowiearly' varsity was cultivated in late October 2020 and early October 2021 in the Saemangeum reclaimed land. The seeding methods were conventional drill sowing seeding, new technology spot seedling (30 × 18 cm) and new technology drill sowing seeding. The amount of sowing was conventional drill sowing seeding 2.0(kg/10a), new technology spot seedling 1.5(kg/10a), and new technology drill sowing seeding 1.5(kg/10a). Fertilizer application amount is conventional drill sowing seeding(N-P₂O₅-K₂O) 9.0-12-12(kg/10a), and new technology spot seedling and drill sowing seeding were(N-P₂O₅-K₂O) 4.5-12-12(kg/10a) respectively. Fertilizer was applied accordingly. After that, in February, the conventional drill sowing seeding, new technology drill sowing seeding and spot seedling applied 4.0 and 2.2(kg/10a) of nitrogen supplement fertilizer, respectively. Before wintering, plant length was higher in 2022 than in 2021, but leaf number was higher in 2021. Heading time was April 30, 2021 and April 25, 2022. In heading time, plant length was 74 cm in 2021 and 67 cm in 2022, lower than in 2021. On the other hand, There was no difference in the number of panicle and the number of seeds in the 2021 harvester in all treatment plots, and, thus seed yield was no differ. However, the drill sowing seeding and spot seedling of the new technology were somewhat higher than the conventional drill sowing seeding. On the other hand, seed yield was decreased in all treatment plots compared to 2022 because of raifall deficiency in 2021.

• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.584-592
• /
• 2006

This study was conducted to investigate the effects of sowing date on yield component and yield in sprout-soybean. Six sprout-soybean cultivars were planted on three sowing dates in 2000 and 2001. 100-seed weight, number of seeds per pod, number of seeds, number of pods per plant, and ratio of empty pods distinct differences between sowing dates and cultivars. All yield components except the 100-seed weight and number of seeds per pod diminished recording where the sowing day will be late. The ratio of pods with two or three seeds was 77.5 from 80.9 percents. The ratio of two-seed pods were affected by sowing date. The yield of soybean of May 25 sowing was 290 kg/10a followed by June 15 and July 5 sowing with 269 kg/10a and 221 kg/10a, respectively Late sowing greatly decreased the yield of Doremikong, while yields of Tawonkong were more a less stable. In 2000, yield showed positive correlation with number of branches, number of pods per plant, number of seeds per plant, dry weight, leaf area, and oil content. While yield of 2001 showed positive correlation with number of nodes on main stem, stem thickness, number of pods per plant, dry weight, and leaf area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.1
• /
• pp.80-86
• /
• 2021

The purpose of this study was to determine the optimal sowing date for the spring sowing cultivation of rapeseed (Brassica napus L.). To determine suitable rapeseed sowing dates for spring sowing cultivation, changes in growth, flowering characteristics, and seed production were investigated in Muan, South Korea between 2019 and 2020. 'Jungmo7001' is the suitable variety for spring sowing because of its early flowering characteristics, high seed yield, and the fact that it occupies the highest cultivation area in South Korea. When the yield of 'Jungmo7001' was investigated in 2019 and 2020, the highest yields recorded were 243 kg/10a in February 28, 2019, and 294 kg/10a in February 18, 2020. As a result, the optimal rapeseed seeding period is considered to be mid-to-late February in the southern region. There was no statistically significant difference in seed crude oil content. The content of oleic acid (C18:1) decreased, but that of linoleic acid (C18:2) and of linolenic acid (C18:3) increased significantly depending on the sowing date.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.402-409
• /
• 2017

We performed seed germination tests to investigate the effects of seed sowing orientation on germination viability on peanut (Arachis hypogaea L.) sprouts. Specifically, we assessed the influence of seed sowing orientation on germination rate, seedling weight, and seedling length, as well as the seedling vigor index. The seeds were sown in oak tree sawdust at 3.0 cm depth. Four seed orientations were tested: vertical with the hypocotyl end down, vertical with the hypocotyl end up, horizontal with the hypocotyl end down, and horizontal with the hypocotyl end up. The mean seed germination percentages of the four seed orientations were significantly different (p < 0.01) and ranged from 25 to 91.7%. The vertical orientation with hypocotyl-end-down and hypocotyl-end-up orientations showed the highest (91.7%) and lowest (25%) germination rates, respectively. The vertical orientation with the hypocotyl end down produced the heaviest (4.9 g) seedlings and the longest hypocotyls (4.65 cm). This orientation also produced the longest true leaf + epycotyl (2.15 cm) and had the highest seedling vigor index (197.1). The seedlings had a straight growth pattern, whereas seedlings from seeds sown with the hypocotyl up had an awkward plumular hook shape. Taken together, to produce peanut sprouts, we recommend placing the seeds vertically with the hypocotyl end down because this orientation leads to a high germination rate, high biomass production, and high overall seedling quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.221-224
• /
• 1999

A field experiment was carried out to observe the weed control effects of vetch and to evaluate vetch characteristics on clay loam soil in no-till direct-sown rice-vetch cropping systems. The effects of weed control, forage productivity, and N content of vetch plants were investigated. With the progress of plant growth, density of Chinese milk vetch (Astragalus sinicus L.) gradually decreased, but densities of foxtail and other weeds decreased steeply due to the depression by the over-shaded vetch canopy in a no-till direct-sown rice-vetch cropping paddy field. The vetch density in tillage systems was lower than in notillage cropping systems. Lower vetch density occurred with an increase in foxtail density and other weeds. Weed control effect increased by the progress of vetch growth, which indicated that the vetch canopy over-shaded the weeds. Vetch straw was degraded rapidly submergence after with water at the time of wet sowing of rice. Early harvesting of vetch seed resulted in lower seed germination. To acquire enough seedlings without re-sowing, the harvesting of seed should be delayed at least 28 days after the flowering stage in order to ensure the vetch population is sustainable in a no-till direct-sown rice-vetch cropping system. In order to improve the survival of vetch plants, vetch seeds should germinate from the heading .stage to before the full-ripening stage of rice plants. To enhance the percent of over-wintering survival, vetch seeds should germinate no later than the end of October in southern Korea. The dry weight of vetch plants increased with the progress of vetch growth until the flowering stage but N content decreased for 30 days from before the flowering stage (2.9%) until the ripening stage (1.8%). We concluded that Chinese milk vetch could have an effect on weed control before the flowering stage, sustainability without re-sowing of seed annually, and effective green manure for rice pre-crop in no-till direct-sown rice-vetch relay cropping systems.