• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.9-13
• /
• 2017

This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between $YBa_2Cu_3O_{7-y}$ (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.402-409
• /
• 2017

We performed seed germination tests to investigate the effects of seed sowing orientation on germination viability on peanut (Arachis hypogaea L.) sprouts. Specifically, we assessed the influence of seed sowing orientation on germination rate, seedling weight, and seedling length, as well as the seedling vigor index. The seeds were sown in oak tree sawdust at 3.0 cm depth. Four seed orientations were tested: vertical with the hypocotyl end down, vertical with the hypocotyl end up, horizontal with the hypocotyl end down, and horizontal with the hypocotyl end up. The mean seed germination percentages of the four seed orientations were significantly different (p < 0.01) and ranged from 25 to 91.7%. The vertical orientation with hypocotyl-end-down and hypocotyl-end-up orientations showed the highest (91.7%) and lowest (25%) germination rates, respectively. The vertical orientation with the hypocotyl end down produced the heaviest (4.9 g) seedlings and the longest hypocotyls (4.65 cm). This orientation also produced the longest true leaf + epycotyl (2.15 cm) and had the highest seedling vigor index (197.1). The seedlings had a straight growth pattern, whereas seedlings from seeds sown with the hypocotyl up had an awkward plumular hook shape. Taken together, to produce peanut sprouts, we recommend placing the seeds vertically with the hypocotyl end down because this orientation leads to a high germination rate, high biomass production, and high overall seedling quality.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.863-866
• /
• 2013

SiC crystal ingots were grown on 6H-SiC dual-seed crystals with different surface roughness and different seed orientation by a PVT (Physical Vapor Transport) method. 4H and 15R-SiC were grown on seed crystal with high root-mean-square (rms) value. The polytype of grown crystal on the seed crystal with lower rms value was confirmed to be 6H-SiC. On the other hand, all SiC crystals grown on seed crystals with different seed orientation were proven to be 6H-SiC. The surface roughness of seed crystals had no effect on the crystal structure of the grown crystals. However, the crystal quality of 6H-SiC single crystals grown on the on-axis seed were revealed to be slightly better than that of 6H-SiC crystal grown on the off-axis seed.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.619-623
• /
• 2006

FBAR(Film Bulk Acoustic Resonator) 소자의 공진특성을 결정하는 가장 중요한 요소는 압전막의 압전성을 들 수 있다. FBAR 압전막으로 유력한 ZnO 압전박막은 (002)면 c-축 우선배향성(preferred orientation)의 정도에 따라서 압전성이 결정된다. 그러므로 ZnO 박막의 우선배향성에 관한 연구는 많은 연구자들의 관심사가 되어왔다. 본 논문에서는 ZnO 보조씨드충(helped seed layer)을 이용하여 ZnO 압전박막의 우선배향성에 대하여 조사하였으며, rocking curve의 표준편차$(\sigma)$ 값이 $1.15^{\circ}$인 주상형 결정립을 가진 c-축 ZnO 압전박막이 우수한 압전특성을 나타내는 것을 확인하였다.

• 원예과학기술지
• /
• 제32권1호
• /
• pp.26-32
• /
• 2014

본 연구에서는 종자전염병의 무독화를 위해 실시하는 건열처리에 의한 종자의 활력감소를 회복시키기 위한 방법을 개발하고자 하였다. 건열처리된 종자의 활력감소 정도는 작물과 품종에 따라 다양하게 나타났다. 일반적으로 호박 종자가 박 종자에 비하여 활력이 덜 감소하였다. 건열처리된 종자를 0, 30, 120일간 후처리하였을 때, 발아율은 건열처리 후처리 기간이 증가함에 따라 높아졌는데, 후처리 효율은 작물과 품종에 따라 상이하였다. 또한, 박과 호박 종자를 상향 또는 수평 파종 시 하향 파종보다 높은 종자활력과 묘소질을 보였다. 따라서 건열처리에 의한 종자활력의 감소는 적절한 후처리 뿐만 아니라 상향파종을 통해서도 효과적으로 회복시킬 수 있음을 확인하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.35-40
• /
• 2022

To fabricate large grain YBCO bulk superconductors by melt process, Sm123 single crystal with a high melting point are mostly used as seeds. However, it also uses Y123 film deposited on MgO single crystal substrate. This study investigated the growth behavior of the Y123 grain during a melt process when single grain YBCO bulk was used as a seed. Single grain Y123 bulk was grown when the seed size was small. When the seed size was relatively large, multiple grains were grown but the grains were still large. Y123 seed crystal was completely decomposed during high temperature anneal at 1040℃ and new Y123 crystals were nucleated during a slow cooling stage below a peritectic temperature. Thereafter, newly formed Y123 crystals from the seed area are thought to grow into the Y1.8 powder compact. The crystallographic orientations of newly nucleated Y123 grains are independent of the crystallographic orientation of Y123 seed. It is thought that the crystallographic orientation of newly nucleated Y123 crystal can be controlled by using Y211-free Y123 single crystal as a seed of homo-seeding melt growth.

• 한국결정학회지
• /
• 제5권2호
• /
• pp.93-99
• /
• 1994

K2O/3MOOS/0.SBB03 융제를 사용하여 TSSG 법으로 육성한 Md:Yal3(BO3)4 (NYAB) 단결정의 결정외형 및 표면형상을 연구하였다. <100>과 <120> 종자정을 사용한 경우는 서로 다른 크기의 프리즘 면들과 (101) 면들이 발달하였고 <001> 종자정을 사용하였을 때는 (001) 면이 함께 발달하였다. 종자정의 방향이 <100>또는 <120> 일때 프리즘 면 위에 성장구룽이 많이 형성되었으나, <001> 일때는 이웃하는 (101) 면에 평행한 줄무늬가 형성 되었다. (101) 면은 이차원 핵생성에 의한 성장이 지배적이고, <001> 종지정을 사용할 때 발달하는 (001) 면은 나선형 전위에 의한 성장이 지배적이었다. 종자정의 방향은 성장외형을 변화시키고 성장외형과 결정의 질을 결정하는 중요한 성장변수로 작용하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2000년도 추계총회,초청강연,특별강연,연구발표회
• /
• pp.64.2-64
• /
• 2000

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.333-339
• /
• 2014

Single crystal growth of $BaFe_{12}O_{19}$ by the solid state crystal growth method was attempted. Seed crystals of ${\alpha}-Fe_2O_3$ were pressed into pellets of $BaFe_{12}O_{19}$ + 2 wt% $BaCO_3$ and heat-treated at temperatures between $1150^{\circ}C$ and $1250^{\circ}C$ for up to 100 hours. Instead of single crystal growth taking place on the seed crystal, BaO diffused into the seed crystal and reacted with it to form a polycrystalline reaction layer of $BaFe_{12}O_{19}$. The microstructure, chemical composition and structure of the reaction layer were studied using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), x-ray Diffraction (XRD) and micro-Raman scattering and confirmed to be that of $BaFe_{12}O_{19}$. XRD showed that the reaction layer shows a strong degree of orientation in the (h00)/(hk0) planes in the sample sintered at $1200^{\circ}C$. $BaFe_{12}O_{19}$ layers with a degree of orientation in the (hk0) planes could also be grown by heat-treating an ${\alpha}-Fe_2O_3$ seed crystal buried in $BaCO_3$ powder.