• Journal of The Korean Society of Grassland and Forage Science
• /
• v.2 no.2
• /
• pp.16-20
• /
• 1981

To cultivate Dystaenia takesimana as a fodder crop, Its problems and solutions are summarized follows : 1. There are a wax layer and wings on the out side of seed coat of D. takesimana seeds, which seems to inhibit imbibition and cause delayed germination. 2. The root and shoot growth of D. takesimana are very poor in the early stage and weed control is quite troublesome. 3 The growth of D. takesimana is very poor the soil of low fertility and much depressed in summer. 4 . The percent germination could be increased by removing wings, soaking, high temperature treatment or by chemical scarification. 5. Compost is most effective for the growth of D. takesimana and lime dressing is desired in the soil of low pH. 6 . The seedling growth could be improved selecting and breeding the strains with better germination and root growth, at the germination and growth characteristics of D. takesimana are variable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.281-281
• /
• 2010

In this study, ZnO nanorod arrays are grown on organic substrates by hydrothermal method which requires a low temperature, simple process, and no vacuum. The structure properties of ZnO nanorods were examined by field emission scanning electron microscopy and X-ray diffraction. To detect the optical transmission, ultraviolet visible spectrophotometer was also used. From results, the ZnO nanorods were grown the horizontal growth on the organic substrates had the length of over $10\;{\mu}m$. After deposition of ZnO seed layer, the ZnO nanorod arrays had uniformity orientation and length.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.75-80
• /
• 2004

In copper metallization, resistivity of copper seed layer is very important. Conventionally MOCVD has been used for this purpose however electroless copper plating is simple process and the resistivity of copper deposit is less than that of copper prepared by MOCVD. In this study electroless copper plating was conducted on different substrate to find optimum conditions of electroless copper plating for electronic applications. To find optimum conditions, the effects and selectivity of activation method on several substrates were investigated. The effects of copper bath composition on morphology were investigated. The effects of pH and stabilizer on deposition rate were also investigated. The optimum pH of the bath was 12 with addition of stabilizer. The resistivity of copper was decreased with addition of stabilizer and alter heat treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.437-437
• /
• 2011

수열합성법에 의해 나노와이어를 합성하였다. 수직하고 장경비가 큰 나노와이어는 기존 Zinc nitrate와 HMTA를 각각 같은 몰 농도(0.015 mol/L)로 하고 이때 나노와이어의 밀도 조절 및 수직성장을 돕고 더 길게 자랄 수 있도록 polyethylenimine (PEI)를 포함하였으며, 이때 화학적으로 불안정한 seed layer 보호하기 위하여 증가 된 Ph 농도를 완화하기 위해 nitrate acid 를 포함한 반응 용액 내에서 생성되었다. 합성된 나노와이어는 지그재그 전극과 결합하여 리니어 모터를 통해 일정한 시간 주기로 일정한 압력을 가하여 얻은 압전특성을 관찰하고 분석하였다.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2006

We electroplated copper-cobalt thin films on a silicon substrate, which had 150 nm thick copper seed layer. The adhesion between the two metallic layers could be increased by utilizing a proper organic additive, pulse plating technique, and high temperature annealing. The thin films exhibited columnar growth of the deposits and enhanced adhesion. This is attributed to the grain growth mechanism introduced by the additive and annealing.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.638-638
• /
• 2013

ZnO는 넓은 밴드갭(3.37 eV)를 가지기 때문에 UV detector로 유용하게 쓰일 수 있다. 본 연구에서는 Graphene 위에 ZnO nanorod를 hydrothermal 방법을 사용하여 성장한 후 Graphene 위에 전극을 형성한 후 UV 센서를 제작하였다. Si의 기판위에 SiO2의 막을 증착을 하고 그 위에 Graphene을 전도시킨다. Graphene위에 ZnO nanorod의 성장을 위해서 ZnO seed layer를 sputtering 방법으로 얇게 증착을 시킨다. ZnO nanorod의 성장은 hydrothermal의 방법으로 Zinc nitrate hexahydrate와 암모니아를 수용액에 넣은 후 $80^{\circ}C$에서 성장하였다. Graphene 위에 ZnO가 없는 부분에 전극을 형성하여 UV의 세기에 따른 IV 전기적 특성의 변화를 관측한다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.7-12
• /
• 2002

반도체 공정에서 구리(Cu) 배선의 미세구조와 신뢰성에 대해 연구하였는데, 특히 CVD Cu와 전기도금 Cu를 사용하여 신뢰성에 대한 texture와 결정 구조의 영향을 연구하였다 CVD Cu의 경우 여러 가지 시드층(seed layer)을 사용함으로서, 결정입자의 크기는 비슷하지만 texture가 전혀 다른 Cu 박막을 얻을 수 있었는데, 신뢰성 검사결과 (111) texture를 가진 Cu 배선의 수명이 (200) texture를 가진 Cu 배선의 수명보다 약 4배 가량 길게 나왔다. 전기도금 Cu 박막의 경우 항상 (111) texture를 갖고 있었으며 결정립의 크기도 CVD Cu의 것보다 더 컸다. Damascene 공법으로 회로 형성한 Cu 배선의 경우에도 전기도금 Cu의 결정립 크기가 CVD Cu의 것보다 더 크게 나타났으며, 신뢰성 검사결과 배선의 수명도 더 길게 나타났는데 그 차이는 0.4 $\mu\textrm{m}$ 이하의 미세선폭 영역에서 더욱 현저했다. 따라서 전기도금 Cu가 CVD Cu보다 신뢰성 측면에서 더 우수한 것으로 판명되었다.

• Journal of the Korean Chemical Society
• /
• v.21 no.3
• /
• pp.193-203
• /
• 1977

Three sterol fractions; 4-desmethyl-, 4-monomethyl-, and 4,4-dimethylsterol, separated by thin layer chromatography from the unsaponifiables of five Cucurbitaceae (cucumber, watermelon, sponge cucumber, gourd and snake gourd) seed oils were analyzed by gas liquid chromatography and combined gas liquid chromatography-mass spectrometry. ${\alpha}$-Spinasterol, ${\Delta}^{7,22,25}$-stigmastatrienol and ${\Delta}^{7,25}$-stigmastadienol isolated from the 4-desmethylsterol fraction were identified by IR, NMR and mass spectrometry.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.245-246
• /
• 2015

In this study, the structure of a edge flame near the flammability limits was explored through several paths approaching the combustion limits of a non-premixed flame: i.e., increase of fuel dilution ratio (FDR), reduction of mean flow velocity and variation of gravity effect. As a result, a unique interesting flame structure was discovered; i.e., a diffusion flame branch was enclosed by two asymmetric premixed flame branches. These structures have been compared for various fuels. Conclusively, each fuel has different flame structure and the meaning of this structure was discussed concerned about our understanding of laminar flame structures.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2003.11a
• /
• pp.133-134
• /
• 2003

This study was conducted to develop ornamental bird granule-type feeds for shortening working hours and improving productivity at the bird farms. We developed two kinds of Common finch feeds for the growing and layer birds. The ME level was 3,200 kcal/kg, respectively and the CP was 16and 20 ％, respectively. The developed feeds and traditional mixed-seed feeds were compared to investigate the egg production and hatching rate in Common finch. There was no significant differences between the two feeds indicating that the developed feeds can be used at the bird farms. However morphological shape changes of the developed feeds will be needed for effective assumption.