• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.273-273
• /
• 2017

Polyploidy has opened a new horizon for selection to sculpt a variety of new gene functions, traits, and lineages. The aim of this study was to investigate the efficacy of the colchicine concentration, temporal changes, and suitable material for inducing effective tetraploid plants of Codonopsis lanceolata. A total of 180 individuals from 16 treatment groups were germinated, and exposed to different concentrations of Colchicine. The plant height of the diploid (18.1 cm) was slightly shorter than that of the tetraploid (13.4 cm). The fresh weight of the main root in the diploid (0.5 g) was 4-fold higher than the tetraploid (2.2 g). The colchicine-treated plant regeneration rate in C. lanceolata was decreased at the elevated concentration of colchicine. A total of 126 individual plants were regenerated in the entire treatment group and tetraploid (2n=4x=32) plants were obtained. In particular, 5 individuals of the tetraploid plant were induced in the 0.05% colchicine for 6h, which is a higher rate (29.4%) than other regenerated plants. As in the seed treatment result, the plant height of the diploid was significantly higher (10.4 cm) than tetraploid. The root length of the tetraploid (10.1 cm) was longer than the diploid, and the root was also thicker. Taken together, the results obtained from the present study may be helpful for the efficient recovery of such polyploid plants through the in vitro application of colchicine, and may improve the productivity and breeding of C. lanceolata.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.4 no.2 s.7
• /
• pp.53-66
• /
• 2005

Microscopic simulation models, which focus on individual vehicles, are used extensively in the transportation operations in order to capture vehicle to vehicle and vehicle to traffic controls. There are many important factors involved when a micro simulation model is applied as an evaluation tool for the traffic system. They typically include test bed, software, simulation time period, measure of effectiveness, parameter for a software, OD matrix, and random seed number. To evaluate the effects of those factors, sensitivity analysis was performed to identify the effects of those factors based on CORSIM and TRANSIMS results. Three freeway corridors, two in Houston (I-10 and US 290) and one in Sin Antonio (I-37), were chosen as test beds. Three time periods (AM, PM, off-peak) and three OD matrix estimates were used for the analysis. It was found that the micro-simulation results were highly sensitive to the model Parameter sets and the OD information. The degree of sensitivity was a function of the test bed and time period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.378-385
• /
• 2013

The aim of this study was to examine the effect of variety and growing conditions of wheat on broiler performance and nutrient digestibility. One hundred and sixty-four wheat samples, collected from a wide range of different sources, locations, varieties and years, were analyzed for a range of chemical and physical parameters. Chemical and physical parameters measured included specific weight, thousand grain weight (TG), in vitro viscosity, gross energy, N, NDF, starch, total and soluble non-starch polysaccharides (NSP), lysine, threonine, amylose, hardness, rate of starch digestion and protein profiles. Ninety-four of the wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolizm cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), live weight gain (LWG) and gain:feed were determined weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, DM retention, oil and NDF digestibility. At 28 d the birds were sacrificed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal DM, starch and protein digestibility. The wheat samples used in the study had wide-ranging chemical and physical parameters, leading to bird DMI, LWG, gain:feed, ME:GE, AME content and ileal starch and protein digestibility being significantly (p<0.05) affected by wheat sample. A high level of N fertilizer application to the English and NI wheat samples tended to benefit bird performance, with increases of up to 3.4, 7.2 and 3.8% in DMI, LWG and gain:feed, respectively. Fungicide application also appeared to have a positive effect on bird performance, with fungicide treated (+F) wheat increasing bird DMI, LWG and gain:feed by 6.6, 9.3 and 2.7%, over the non-fungicide treated (-F) wheats. An increase (p<0.1) of 9.3% in gain:feed was also observed at the low seed rate of 40 compared to 640 seeds/$m^2$. It was concluded that the type of wheat sample and environmental growing conditions significantly affects bird performance when fed wheat-based diets.

• Plant Biotechnology Reports
• /
• v.5 no.3
• /
• pp.217-224
• /
• 2011

Non-heading Chinese cabbage (Brassica rapa L. ssp. chinensis) is a popular vegetable in Asian countries. The diamondback moth (DBM), Plutella xylostella (L.), an insect with worldwide distribution, is a main pest of Brassicaceae crops and causes enormous crop losses. Transfer of the anti-insect gene into the plant genome by transgenic technology and subsequent breeding of insect-resistant varieties will be an effective approach to reducing the damage caused by this pest. We have produced transgenic non-heading Chinese cabbage plants expressing the potato proteinase inhibitor II gene (pinII) and tested the pest resistance of these transgenic plants. Non-heading Chinese cabbages grown for 45 days on which buds had formed were used as experimental materials for Agrobacterium-mediated vacuum infiltration transformation. Forty-one resistant plants were selected from 1166 g of seed harvested from the infiltrated plants based on the resistance of the young seedlings to the herbicide Basta. The transgenic traits were further confirmed by the Chlorophenol red test, PCR, and genomic Southern blotting. The results showed that the bar and pinII genes were co-integrated into the resistant plant genome. A bioassay of insect resistance in the second generation of individual lines of the transgenic plants showed that DBM larvae fed on transgenic leaves were severely stunted and had a higher mortality than those fed on the wild-type leaves.

• Journal of Plant Biotechnology
• /
• v.30 no.4
• /
• pp.387-397
• /
• 2003

During the first half of twentieth century, even though the importance of non-calorie essential micronutrients of 13 vitamins and 17 minerals has been known to alleviate nutritional disorder; the primary objective of agriculture and plant breeding programs has been to increase the productivity and seed yields, and macronutrients of proteins, fats, and carbohydrates made up the bulk of foodstuff which were used primarily as an energy source. In the last decade it has been found that non-essential micronutrients encompass a vast group of phytochemicals including antioxidants that are not strictly required in the diet but when present at sufficient levels work as health-promoting chemicals. Nowadays agricultural crops are grown for health rather than for food or fiber, and modifying the nutritional compositions of plant foods has become an urgent health issue. To ensure an adequate intake of essential vitamins and minerals, and to increase the consumption of health-promoting phytochemicals, the researches on plant secondary metabolism have been made. The attempt to improve nutritional quality of crops has been blocked by a lack of basic knowledge of plant metabolism. The advent of genomics era enabled new approaches to make crossing regardless of species, family, or phylum barriers, and the accumulation in our basic knowledge on plant secondary metabolism during the coming decade would be tremendous. As the major staple crops contain insufficient amount of many micronutrients, fortification strategy will be a necessary practice. Elevated intake of specific vitamins, C, E, and $\beta$-carotene, mineral selenium, antioxidants, and phytochemicals significantly reduces the risk of chronic disease such as cancer, cardiovascular disorder, diabetis, and other degenerative disease associated with aging. As the attempt to improve the nutritional quality of crops requires the basic knowledges on plant metabolism, plant biochemistry, human physiology, and food chemistry, strong interdisplinary collaboration among plant biotechnologists, human nutritionists, and food scientists will be needed. Inhibition of cancer, cardiovascular disease, and other degenerative disorder may be the biggest goal facing nutritional plant breeders. But the assumption that simply increasing dietary level of any compound will necessarily improve human health is a dangerous idea because many plant secondary products and dietary contaminants have paradoxical (hermetic) effects. Before biotechnical manipulation is undertaken to elevate or reduce any individual constituent of crops, the contribution of the micronutrient to human health must first be investigated.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.1
• /
• pp.13-18
• /
• 2007

Near-infrared spectroscopy(NIRS) was used as a rapid and nondestructive method to determine the fatty acid composition in intact seed samples of rapeseed(Brassica napus L.). A total of 349 samples(about 2 g of intact seeds) were scanned in the reflectance mode of a scanning monochromator, and the reference values for fatty acid composition were measured by gas-liquid chromatography. Calibration equations for individual fatty acids were developed using the regression method of modified partial least-squares with internal cross validation(n=249). The equations had low SECV(standard errors of cross-validation), and high $R^2$(coefficient of determination in calibration) values(>0.8) except for palmitic and eicosenoic acid. Prediction of an external validation set(n=100) showed significant correlation between reference values and NIRS estimated values based on the SEP(standard error of prediction), $r^2$(coefficient of determination in prediction), and the ratio of standard deviation(SD) of reference data to SEP. The models developed in this study had relatively higher values(> 3.0 and 0.9, respectively) of SD/SEP(C) and $r^2$ for oleic, linoleic, and erucic acid, characterizing those equations as having good quantitative information. The results indicated that NIRS could be used to rapidly determine the fatty acid composition in rapeseed seeds in the breeding programs for high quality rapeseed oil.

• Journal of Plant Biology
• /
• v.4 no.1
• /
• pp.1-7
• /
• 1961

Harn, Chang Yawl (Chonpuk U., Iri, Korea)-Studies on the interspecific crossing of FORSYTHIA genus. Kor. Jour. Bot. 4(1)1~8 1961: Interspecific crossing of two species, F. saxatilis and F. Koreana, was carried out in order to make clear the segregation ratio of style length, mode of fertility, the fertility of F1 generation, dioecism, and other taxonomic question, the result of which being summarized as follows: 1) Style length is segregated into 1:1 ratio. 2) The behaviro of fertility in the legitimate and illegitimate unions between the different species is exactly like that in the two dimorphic forms of the same species. 3) The mode of fertility between the long and short style of the F1 generation also follows that of the heterostyle plants. 4) No difficulties or irregularities are observed in the interspecific crossing and the F1's fertility. 5) In F1 generation exceedingly high morphological and physiological variations are observed. 6) The short style individual is well fertilized and sets seed when legitimately combined. The insistence that the short style is male, this genus being dioecious, is groundless. 7) Among F1 individuals, are observed a few dwarf-types with tiny and weak vegetative and reproductive organs. 8) The two species used behave in many ways like the different styles of the same species.

• Plant Resources
• /
• v.5 no.1
• /
• pp.59-69
• /
• 2002

Twenty-three plants of Japanese apricot (Prunus mume) were collected from several sites around Mountains JIRI in Korea. Japanese apricots having the different morphological features were evenly distributed in the groups made from the cluster analysis, indicating no geographic distributions but artificial vegetations in Korea. Japanese apricots were, as based on the PCR-RAPD techniques, clustered into the three groups; a group (prototype) having the five white petals with the five red sepals, a group (green type) having the five white petals with the five green sepals, and a group (hybrid type) having the more than five red petals with various colored sepals. The prototype apricots showed higher toxicities than other type apricot against bacteria and production of less compounds in TLC plates. The polypetal types of Japanes apricot were related to those of p. armebiaca in the characteristics of seed (the ruggedness), but also to be closed to those of p. armebiaca in PCR-RAPD analysis. The cluster analysis of the twenty three apricots and its related species calculated from the two primers were shown to distinguish relationships of cultivars within species, or of individual plants within cultivars, but also to display the two overlapping bands resulted from PCR-RAPD technique.

• Korean Journal of Plant Resources
• /
• v.29 no.3
• /
• pp.347-354
• /
• 2016

The present study was performed to investigate the effects of the colchicine concentrations on chromosome doubling for producing of tetraploid plants of Codonopsis lanceolata, and its effect on plant morphology. A total of 180 individuals germinated from 16 treatment groups, were exposed to various concentrations (0.05-1.0% w/v) of colchicine for different soaking duration (3-24 hour). The highest numbers of tetraploid plants (3) were observed from the lowest concentration of colchicine (0.05%), and one (1) tetraploid plant was obtained from the 0.5% concentration group with a 6 hour treatment. However, no tetraploid individual was observed in any other treatment groups. The plant height of the diploid (18.1 ㎝) was slightly shorter than that of the tetraploid (13.4 ㎝). The fresh weight of the main root in the diploid (0.5 g) was four-fold higher than the tetraploid (2.2 g). The colchicine-treated plant regeneration rate in C. lanceolata was decreased when the plants were subjected to high concentration of colchicine. In particular, the highest number of tetraploid plants (5 and 3) was obtained from the lower concentration (0.05% and 0.1%) of colchicine for 6-hour treatment, which were a higher rate (29.4% and 30%) of regenerated tetraploid plants than other regenerated plants. As in the seed treatment result, the plant height of the diploid was significantly higher (10.4 ㎝) than tetraploid. The higher morphological changes were observed comparatively from tetraploid plants than the diploid.

• Journal of Forest and Environmental Science
• /
• v.33 no.4
• /
• pp.355-360
• /
• 2017

This study was aimed to analyze the increased forestry incomes by combining timber production and wood processing, which is one of 6th industrialization types in Korean forestry. The selected household has been engaged in forestry for two generations and they produce timber and associated wood products in their own facility. The wood products include dimension lumber, interior wood material, cutting board, and cube chips, the household also utilize logging and sawmill residues as well as seed and seedlings as by-products. Incomes and expenses that have been incurred on individual processes of the sequential timber production and wood processing were surveyed, and we analyzed the economic outcomes of entire business. The results of this study indicate that the gross income of the household is 122.3 million Korean won and the net income is 93.6 million Korean won. The net income of the household is approximately 2.8 times higher than the average net income of whole households in the forestry of Korea in 2016, which is approximately 4.3 times higher than that of households that have been particularly engaged in timber production over the country. We found that the 6th industrialization by combining the two sequential processes creates approximately 3.2 times as much added value compared to the case relying on timber production only.