• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.116-118
• /
• 2023

In recent years, the need for economical and sustainable ship routing has emerged due to the enforced regulations on environmental issues. Despite the development of weather forecasting technology, maritime accidents by rough waves have continued to occur due to incorrect weather forecasts. In this study, onboard measurements are conducted to observe the acutal situation on merchant ships in operation encountering rough waves. The types of measured data include information related to navigation (Ship's position, speed, bearing, rudder angle) and engine (engine revolutions, power, shaft thrust, fuel consumption), weather conditions (wind, waves), and ship motions (roll, pitch, and yaw). These ship experiments was conducted to 28,000 DWT bulk carrier, 63,000 DWT bulk carrier, 20,000 TEU container ship, and 12,000 TEU container ship. The actual ship experiment of each ship is intended to acquire various types of data and utilize them for multi-objective studies related to ship operation. Additionally, in order to confirm the sea conditions, the directional wave spectrum was reproduced using a wave simulation model. Through data collection from ship experiments and wave simulations, various studies could be proceeding such as the measurement for accurate wave information by marine radar and analysis for cargo collapse accidents. In addition, it is expected to be utilized in various themes from the perspective of safety and efficiency in ship operation.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.141-156
• /
• 2013

Researchers in welfare services of local government in Korea have rather been on isolated issues as disables, childcare, aging phenomenon, etc. (Kang, 2004; Jung et al., 2009). Lately, local officials, yet, realize that they need more comprehensive welfare services for all residents, not just for above-mentioned focused groups. Still cases dealt with focused group approach have been a main research stream due to various reason(Jung et al., 2009; Lee, 2009; Jang, 2011). Social Security Information System is an information system that comprehensively manages 292 welfare benefits provided by 17 ministries and 40 thousand welfare services provided by 230 local authorities in Korea. The purpose of the system is to improve efficiency of social welfare delivery process. The study of local government expenditure has been on the rise over the last few decades after the restarting the local autonomy, but these studies have limitations on data collection. Measurement of a local government's welfare efforts(spending) has been primarily on expenditures or budget for an individual, set aside for welfare. This practice of using monetary value for an individual as a "proxy value" for welfare effort(spending) is based on the assumption that expenditure is directly linked to welfare efforts(Lee et al., 2007). This expenditure/budget approach commonly uses total welfare amount or percentage figure as dependent variables (Wildavsky, 1985; Lee et al., 2007; Kang, 2000). However, current practice of using actual amount being used or percentage figure as a dependent variable may have some limitation; since budget or expenditure is greatly influenced by the total budget of a local government, relying on such monetary value may create inflate or deflate the true "welfare effort" (Jang, 2012). In addition, government budget usually contain a large amount of administrative cost, i.e., salary, for local officials, which is highly unrelated to the actual welfare expenditure (Jang, 2011). This paper used local government welfare service data from the detailed data sets linked to the Social Security Information System. The purpose of this paper is to analyze the factors that affect social welfare spending of 230 local authorities in 2012. The paper applied multiple regression based model to analyze the pooled financial data from the system. Based on the regression analysis, the following factors affecting self-funded welfare spending were identified. In our research model, we use the welfare budget/total budget(%) of a local government as a true measurement for a local government's welfare effort(spending). Doing so, we exclude central government subsidies or support being used for local welfare service. It is because central government welfare support does not truly reflect the welfare efforts(spending) of a local. The dependent variable of this paper is the volume of the welfare spending and the independent variables of the model are comprised of three categories, in terms of socio-demographic perspectives, the local economy and the financial capacity of local government. This paper categorized local authorities into 3 groups, districts, and cities and suburb areas. The model used a dummy variable as the control variable (local political factor). This paper demonstrated that the volume of the welfare spending for the welfare services is commonly influenced by the ratio of welfare budget to total local budget, the population of infants, self-reliance ratio and the level of unemployment factor. Interestingly, the influential factors are different by the size of local government. Analysis of determinants of local government self-welfare spending, we found a significant effect of local Gov. Finance characteristic in degree of the local government's financial independence, financial independence rate, rate of social welfare budget, and regional economic in opening-to-application ratio, and sociology of population in rate of infants. The result means that local authorities should have differentiated welfare strategies according to their conditions and circumstances. There is a meaning that this paper has successfully proven the significant factors influencing welfare spending of local government in Korea.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.355-361
• /
• 2006

In large scale environments like airport, museum, large warehouse and department store, autonomous mobile robots will play an important role in security and surveillance tasks. Robotic security guards will give the surveyed information of large scale environments and communicate with human operator with that kind of data such as if there is an object or not and a window is open. Both for visualization of information and as human machine interface for remote control, a 3D model can give much more useful information than the typical 2D maps used in many robotic applications today. It is easier to understandable and makes user feel like being in a location of robot so that user could interact with robot more naturally in a remote circumstance and see structures such as windows and doors that cannot be seen in a 2D model. In this paper we present our simple and easy to use method to obtain a 3D textured model. For expression of reality, we need to integrate the 3D models and real scenes. Most of other cases of 3D modeling method consist of two data acquisition devices. One for getting a 3D model and another for obtaining realistic textures. In this case, the former device would be 2D laser range-finder and the latter device would be common camera. Our algorithm consists of building a measurement-based 2D metric map which is acquired by laser range-finder, texture acquisition/stitching and texture-mapping to corresponding 3D model. The algorithm is implemented with laser sensor for obtaining 2D/3D metric map and two cameras for gathering texture. Our geometric 3D model consists of planes that model the floor and walls. The geometry of the planes is extracted from the 2D metric map data. Textures for the floor and walls are generated from the images captured by two 1394 cameras which have wide Field of View angle. Image stitching and image cutting process is used to generate textured images for corresponding with a 3D model. The algorithm is applied to 2 cases which are corridor and space that has the four wall like room of building. The generated 3D map model of indoor environment is shown with VRML format and can be viewed in a web browser with a VRML plug-in. The proposed algorithm can be applied to 3D model-based remote surveillance system through WWW.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.59-67
• /
• 2019

In this study, the UAV (Unmammed Aerial Vehicle) was applied for the photogrammetry of the construction site and the safety management of steel pipe scaffold. The research site is a temporary facility for building reinforcement on Samcheok Campus of Kangwon National University. The installation condition of the steel pipe scaffold was investigated, and the pillar distance, the beam distance and the wale distance were surveyed. As a result, it was found that the beam distance of the scaffold in the longitudinal direction was in good agreement with the standard, but the pillar distance and the wale distance were found to be less than the standard. Three-dimensional data can be used in drone shooting to enable three-dimensional measurement, so that it is possible to measure facilities hidden or located inside other facilities. Through the drone shooting, the condition of the site can be quickly recorded and the surveying can be carried out without interfering with the work of the field personnel. Although the installation of the temporary structure must be strictly observed to ensure the safety of the workers, it is found that the installation standards are still neglected in the field. In order to prevent this practice, it was thought that the legal system should be supplemented so that it could be checked periodically by using UAV in the field process management.

• Korean Institute of Interior Design Journal
• /
• v.24 no.6
• /
• pp.202-211
• /
• 2015

This study attempts to deduce the necessity and validity of complexation, and suggests complexation through complexation suitability evaluations as follows. First, the concept and current state of leisure facilities for the elderly and elementary facilities and architectural complexation were investigated through theoretical considerations. Second, the target schools for complexation of 'elementary school-leisure facility for the elderly' were selected. The aspects of facility introduction of an elementary school, teacher support facility, convenience facility for the disabled, safety and security facilities as well as school facility accessibility were investigated on the basis of the data attained from theoretical considerations. Third, the feasibility of complexation of leisure facilities for the elderly was reviewed, based on the investigated data on complexation-targeted elementary school. Regarding school building and support facilities, with a focus on leisure programs for the elderly, the availability and number of rooms, extra numbers of regular classrooms and the room condition were assessed on the basis of the analysis of operational perspective of each facility. The convenience facilities for the disabled were examined by classifying them into interventional facility in consideration of facilities for the elderly, pursuant to the provisions in the convenience promotion assurance act for the disabled, elderly and pregnant women. Safety and security facilities were evaluated in an effort to assess the safety issue of the elderly and children. The result of the evaluation of the 6 elementary schools in Seong-buk county based on the above-mentioned four measurement standards shows that they scored 107~124 points out of the total 155 points, with the average of 118.5 points. This is more than the medium score and shows the possible complexation of the elementary school facilities as the leisure facilities for the elderly, and at the same time it may lead each school to find out the elements conducive to enhancing the complexation as a result of the evaluation. Through the evaluation data, I expect that we contribute to promoting the process of the evaluation of the appropriateness of complexation and the efficient complexation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.246-251
• /
• 2016

The use of security lighting that emits spill light is considered a cause of light trespass problems in the residential areas. Therefore, a cutoff panel was installed as an alternative way to reduce light trespass. On the other hand, it has another problem in that it is less effective and is not good enough for aesthetics and safety. In this study, a light cutoff panel was designed and manufactured to reduce the light trespass, and the structure of a proper light cutoff panel was studied. Using a goniophotometer, the light distribution file (IES file) was extracted and the characteristics of light distribution were analyzed using the RELUX program. The results showed that the reduction of spilt light in the backward direction was decreased significantly for all types of light cutoff panels except the coated globe. In the case of a black powder coated light cutoff panel, the forward light caused by light reflected from the surface of the light cutoff panel was also reduced, which means that the black powder coated light cutoff panel is effective in the performance of light cutoff in the forward and backward directions. In addition, the coated glove increased the spilt light in the forward and backward directions because it reflects the upward light to go down. A 90 % accuracy between the measurement value of light trespass and the expected value of the light trespass was obtained from a simulation.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.39-51
• /
• 2020

Recently, flood damage has been increasing in Korea due to frequent local torrential rains caused by abnormal weather conditions. According to the calculation of the recurrence period of torrential rain that occurred in North Chungcheong Province on July 16, 2017, it was estimated that the rainfall frequency in the upper are of Goessan Dam was around 1,524 years, and the highest level of Goesan Dam rose to EL.137.60 meters, leaving only 5 cm of margin until the height of the dam floor (EL.137.65 meters). The Goesan Dam, which operated for 62 years since 1957, needs to be prepared to cope with the increase of floodgate volume in the basin, the development of a single purpose dam for power generation only, and there are no measurement facilities for flood control, so efficient operation methods are needed to secure the safety of residents in upper and lower regions. In this study, a method of dam operation was proposed by constructing a rain matrix for quick decision making in flood prediction, calculating the highest level of dam for each condition in advance, and preparing a survey table, and quickly finding the level corresponding to the conditions in case of a situation.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.246-259
• /
• 2008

This study was to minimize the trial and error in the primary step of the C4I system(ATCIS) of the each army corps on the front line, and test the economy and efficiency was tested by reviewing related papers and the system characteristics of other countries. The relationship was researched by analyzing the collected survey data and survey data related to the user's requirement level such as the army standards, that is, commonality, timeliness, simplification, automaticity, field availability and viability, multi-stage security and interoperability, unification. The result showed that the C4I system was efficiently operated through the system reliability for the specification of the system and operation manual, maneuverability and security, adaptability of the war field and system support and management, and good education and training about system operation, and less system maintenance and supplementary element. As a result, the development plan confirmed that the continuous operator education and the construction of the maintenance, and the upgrade digitalization(C4ISR+D) with the korean characteristics based on IT of network systems, and system development of the measurement model of the operator performance must be continuously supplemented in the near future.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.25-39
• /
• 2020

Despite the global promotion of Smart City, there is currently no standard for smart water grid development, and it is not possible to judge the success of Smart City. There is a clear need to establish the requirements and goals of the Smart Water Grid and accurately diagnose and improve the limitations and problems of the existing Smart Water Grid. For this purpose, it is very important to use the index suitable for Smart Water Grid goals. In this study, we developed Smart Water Grid Index which can be used to evaluate the target measurement and attainment of Smart Water Grid and can be utilized based on the implementation plan for Smart Water Grid in the future. Through the development of the Smart Water Grid Key Performance Index (SWG KPI), we will lay the groundwork for continuous capacity evaluation of the Smart Water Grid and improve the reliability of the Index. It is expected that it will be possible to prepare and evaluate a Challenge Evaluation Card for the planned Smart Water Grid by providing an evaluation table for grid competency evaluation.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.13-23
• /
• 2021

This study intended to assess the reliability of topographic data using satellite imaging data. The topographical data using actual instrumentation data and satellite image data were established and applied to the rainfall-leak model, S-RAT, and the topographical data and outflow data were compared and analyzed. The actual measurement data were collected from the Water Resources Management Information System (WAMIS), and satellite image data were collected from MODIS observation sensors mounted on Terra satellites. The areas subject to analysis were selected for two rivers with more than 80% mountainous areas in the Han River basin and one river basin with more than 7% urban areas. According to the analysis, the difference between instrumentation data and satellite image data was up to 50% for peak floods and up to 17% for flood totals in rivers with high mountains, but up to 13% for peak floods and up to 4% for flood totals. The biggest difference in the video data is Landuse, which shows that MODIS satellite images tend to be recognized as cities up to 60% or more in urban streams compared to WAMIS instrumentation data, but MODIS satellite images are found to be less than 5% error in forest areas.