• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.39-42
• /
• 2005

This paper presents a optimal power flow calculation algorithm considering voltage and transient stability In this method, voltage stability margin and transient stability constraints is incorporated into a optimal power flow calculation formulation to guarantee adequate voltage and transient security levels in power system. The proposed method is applied to IEEE-24 Reliability Test System and the results shows the effectiveness of the method.

• Proceedings of the KIEE Conference
• /
• 2005.11b
• /
• pp.58-60
• /
• 2005

This paper presents a optimal power flow calculation algorithm considering voltage and transient stability. In this method, voltage stability margin and transient stability constraints is incorporated into a optimal power flow calculation formulation to guarantee adequate voltage and transient security levels in power system. The proposed method is applied to IEEE-24 Reliability Test System and the results shows the effectiveness of the method.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.847-858
• /
• 2015

Control strategy and corresponding parameters have significant impacts on the overall technical and economic characteristics of composite energy storage systems (CESS). A better control strategy and optimized control parameters can be used to improve the economic and technical characteristics of CESS, and determine the maximum power and stored energy capacity of CESS. A novel coordinated control strategy is proposed considering the coordination of various energy storage systems in CESS. To describe the degree of coordination, a new index, i.e. state of charge coordinated response margin of supercapacitor energy storage system, is presented. Based on the proposed control strategy and index, an optimization model was formulated to minimize the total equivalent cost in a given period for two purposes. The one is to obtain optimal control parameters of an existing CESS, and the other is to obtain the integrated optimal results of control parameters, maximum power and stored energy capacity for CESS in a given period. Case studies indicate that the developed index, control strategy and optimization model can be extensively applied to optimize the economic and technical characteristics of CESS. In addition, impacts of control parameters are discussed in detail.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.109-116
• /
• 2022

The article is devoted to perfecting the system of management of the financial potential of transport enterprises. It is established that transport as an integral part of the state economy has to organically enter the market economy and provide sustainable transport services to national economy enterprises regardless of ownership, as well as ensure passenger transportation. It is also determined that in the conditions of market relations, transport highways must perform their functions with sufficient economic benefit to keep their material and technical resources in good order, conduct an investment policy with extensive use of scientific and technological progress, as well as a social policy guaranteeing the conditions for employees' motivated work. The study reveals an association between the financial and strategic goals of transport enterprises and the minimization of their economic risks, the prevention of bankruptcy and profit margin shortfalls. It is found that transport enterprises need to strive for the overall improvement of their financial potential through increasing the components of financial potential and assessing the impact of risk factors on them: the capacity of fixed assets, the capacity of financial resources, the capacity of services, and the capacity of credit opportunities. These are the elements of transport enterprises' financial potential that ensure its desired level. It is demonstrated that of critical importance in managing the financial potential of a transport enterprise is the role of financial resources, as a subject cannot reach the desired strategic goals without them.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.6
• /
• pp.1017-1024
• /
• 2010

Under the Kyoto Protocol many countries have been requested to participate in emissions trading with the assigned $CO_2$ emissions. In this environment, it is inevitable to change the system and market operation in deregulated power systems, and then ensuring safety margin is becoming more important for balancing system security, economy and $CO_2$ emissions. Nowadays, available transfer capability (ATC) is a key index of the remaining capability of a transmission system for future transactions. This paper presents a novel approach to the ATC evaluation with $CO_2$ emissions using multi-objective particle swarm optimization (MOPSO) technique. This technique evolves a multi-objective version of PSO by proposing redefinition of global best and local best individuals in multi-objective optimization domain. The optimal power flow (OPF) method using MOPSO is suggested to solve multi-objective functions including fuel cost and $CO_2$ emissions simultaneously. To show its efficiency and effectiveness, the results of the proposed method is comprehensively realized by a comparison with the ATC which is not including $CO_2$ emissions for the IEEE 30-bus system, and is found to be quite promising.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.406-408
• /
• 2000

Recently, Korea's electric industry is in the midst of a period of profound changes in the structure and function, including the introduction of market competition in the generation sector. Therefore, it is difficult to promote long-term capacity planning and new generating capacity construction which have been driven by KEPCO so far, after the introduction of market competition, so new generating capacity construction and security of reserve margin is needed through self·regulation plan of private generation producers by market mechanism. According to the competition in the generation sector, a new paradigm is necessary to the long-term capacity planning driven by the Government. This paper analyzes the plan and the incentive level able to guide the new generation capacity construction considering the uncertainty risk in a period of introduction of competition. In addition, this paper analyzes the plan able to guide the new capacity construction by market function at the stage which market become established and Government's role to solve the anxiety about the capacity supply and demand.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.47-53
• /
• 2008

In this study, we analyzed how ozone pollution could be differently measured and how these different measures varied year to year and across the ten most populated cities in the United States, from 1980 to 2000. Although peak values of ozone concentration have been significantly reduced in most polluted U.S. cities for the last 20 years, the annual average values of ozone concentration have not been lowered as much as peak values. Ozone concentration data for each city shows a unique pattern of distribution, central tendency, and also there is a wide variation among different ozone measures. Two different cities with the same annual mean concentration of ozone can experience very different distributions of ozone concentration within a year. Ozone measures also show a wide margin of variability as they are estimated from different ozone monitoring sites within each city. Ozone pollution statistics can be largely varied depending on the choice of measures, monitoring sites, and averaging time period. EPA's new ozone standard of 0.08 ppm averaged over an eight-hour appears to be more stringent than the current maximum ozone standard of 0.12 ppm averaged over one hour.

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.123-130
• /
• 2015

Purpose - Due to highly elevated levels of competition, many companies today have to face the problem of decreasing profits even when their actual sales volume is increasing. This is a common phenomenon that is seen occurring among companies that focus heavily on quantitative growth rather than qualitative growth. These two aspects of growth should be well balanced for a company to create a sustainable business model. For supply chain management (SCM) planners, the optimized, quantified flow of resources used to be of major interest for decades. However, this trend is rapidly changing so that managers can put the appropriate balance between sales volume and sales quality, which can be evaluated from the profit margin. Profit optimization is a methodology for companies to use to achieve solutions focused more on profitability than sales volume. In this study, we attempt to provide executional insight for companies considering implementation of the profit optimization system to enhance their business profitability. Research design, data, and methodology - In this study, we present a comprehensive explanation of the subject of profit optimization, including the fundamental concepts, the most common profit optimization logic algorithm -linear programming -the business functional scope of the profit optimization system, major key success factors for implementing the profit optimization system at a business organization, and weekly level detailed business processes to actively manage effective system performance in achieving the goals of the system. Additionally, for the purpose of providing more realistic and practical information, we carefully investigate a profit optimization system implementation case study project fulfilled for company S. The project duration was about eight months, with four full-time system development consultants deployed for the period. To guarantee the project's success, the organization adopted a proven system implementation methodology, supply chain management (SCM) six-sigma. SCM six-sigma was originally developed by a group of talented consultants within Samsung SDS through focused efforts and investment in synthesizing SCM and six-sigma to improve and innovate their SCM operations across the entire Samsung Organization. Results - Profit optimization can enable a company to create sales and production plans focused on more profitable products and customers, resulting in sustainable growth. In this study, we explain the concept of profit optimization and prerequisites for successful implementation of the system. Furthermore, the efficient way of system security administration, one of the hottest topics today, is also addressed. Conclusion - This case study can benefit numerous companies that are eagerly searching for ways to break-through current profitability levels. We cannot guarantee that the decision to deploy the profit optimization system will bring success, but we can guarantee that with the help of our study, companies trying to implement profit optimization systems can minimize various possible risks across various system implementation phases. The actual system implementation case of the profit optimization project at company S introduced here can provide valuable lessons for both business organizations and research communities.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.301-307
• /
• 2016

The location measurement technique of moving worker in dangerous areas, is necessary for safety in the mines, basements, warehouses, etc. There are various measurement techniques about moving node of position in a restricted environment. Trigonometric Method, one of measurement techniques, is commonly used because of its easiness. However, errors occur frequently when measuring distance and position due to radio interference and physical disability with measuring instruments. This paper proposed a method which is more accurate and shows reduced margin of error than existing trigonometric method by recalculating distance between Anchor and moving node with various measuring instruments. By adding Anchor when calculating distance and position of moving node's estimated point, suggested technique obtains at least 41% efficiency compared to existing method.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.64-70
• /
• 1998

Recently as the interest on Esthetic Dental Prosthesis is arising, the domains of Esthetic Dentistry is being widely investigated. Esthetic Dental Prosthesis is influenced greatly by the shape, color, tooth arrangement of the teeth and the facial features(including the lips). So the degree to which these characters harmonize will be the professional esthetical standard while the satisfaction of the patient will be another esthetical measure. The reason for this is that each and every one of us has a different standard of what is considered beautiful. Of course it doesn't mean that every standard is correct. Then what does Esthetical Prosthesis mean and what should the standard be? This must be defined as a prosthesis that satisfies the basic requirements - margin, contour, occlusion, and at the same time it should restore the shape, color, and tooth arrangement which the client(patient) would love to have. As Esthetic Prosthesis contains its subjective meaning a great deal, it shouldn't be simply distinguished between the beauty of the teeth itself or ugliness. Also in some case, it needs surgical treatment to make it harmonious in the whole aspect so that one may keep the feeling of satisfaction and security. Then what is the shape, color, tooth arrangement that each individual wants? There is an indefinite variety. For example, considering arrangement both regular and irregular is considered beautiful by each different individual. Regular arrangement may be the standard of beauty for some, while irregular arrangement may be thought of as natural looking and beautiful. That is why there must be enough communication with the patient and an agreement be made at the clinic before a diagnostic plan and actual surgery. The treatment plan as mentioned above must be sent to the dental laboratory. In this research, by using case studies, I am going to the importance and appropriateness of the data and information for the dental technician's esthetic prosthesis.