• 한국의류학회지
• /
• 제32권4호
• /
• pp.598-607
• /
• 2008

Bast fibers were applied for various usages from fabrics to household care products long time ago. In this study, we investigated the physical characteristrus of water retted & chemically rotted fibers of Yucca, New Zealand hemp, Corn, Kuzu vine, Indian mallow, and Mulberry paper that have been harvested by domestic cultivation. Water retting is more effective than chemical rotting for six kinds of plant fibers. When all fibers were rotted chemically with 1% sodium hydroxide, only Kuzu vine and Indian mallow were retted. Indian mallow, Yucca, New Zealand hemp, and Com fibers have higher tensile strength than any other fibers. The crystallinity of Kuzu vine, Indian mallow, Yucca, New Zealand hemp, and Corn was as low as 60% but Yucca, New Zealand hemp were flexible. Yucca had fewer lumina whereas New Zealand hemp more lumina in cross sectional shape. Especially com fibers have a structure like sponge, and Indian mallow had a net shape. The longitudinal section of New Zealand hemp showed smooth and long shape. Mulberry paper was proved to be short and thin, which is quite appropriate for making paper. In this study, we found that plant fibers for living material could be used for cloth materials.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.7-12
• /
• 2004

Purpose: To investigate the anatomical structure of the incisive canal radiographically by a cone beam computed tomography. Materials and Methods: 38 persons (male 26, female 12) were chosen to take images of maxillary anterior region in dental CT mode using a cone beam computed tomography. The tube voltage were 65, 67, and 70kVp, the tube current was 7 mA, and the exposure time was 13.3 seconds. The FH plane of each person was parallel to the floor. The images were analysed on the CRT display. Results: The mean length of incisive canal was 15.87 mm±2.92. The mean diameter at the side of palate and nasal fossa were 3.49 mm±0.76 and 3.89 mm± 1.06, respectively. In the cross-sectional shape of incisive canal, 50% were round, 34.2% were ovoid, and 15.8% were lobulated. 87% of incisive canal at the side of nasal fossa have one canal, 10.4% have two canals, and 2.6% have three canals, but these canals were merged into one canal in the middle portion of palate. The mean angles of the long axis of incisive canal and central incisor to the FH plane were 110.3°±6.96 and 117.45°±7.41, respectively. The angles of the long axis of incisive canal and central incisor to the FH plane were least correlated (r= 0.258). Conclusion : This experiment suggests that a cone beam computed radiography will be helpful in surgery or implantation on the maxillary incisive area.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.21-28
• /
• 1994

본(本) 논문(論文)은 사장교(斜張橋)를 대상(對象)으로 하여 전체구조를 몇개의 부분구조계로 나눈 후 유한요소법(有限要素法)을 이용하여 각각 해석하고, 그 결과(結果)를 중량(重量)하여 전체구조의 단면력(斷面力) 및 변위량(變位量)을 구하는 구조분할(構造分割) 해석방법(解析方法)에 대하여 논하였다. 해석방법은 응력형(應力型) 구조분할(構造分割) 해석방법(解析方法)과 변위형(變位型) 구조분할(構造分割) 해석방법(解析方法)이 있는데, 두 방법중(方法中)에서 적절한 방법을 선택하여 구조물(構造物)을 해석(解析)할 수 있다. 이 해석방법을 사용하면 컴퓨터의 기억용량(記憶容量)을 절감시켜, 복잡한 다중(多重)케이블 사장교(斜張橋)도 개인용(個人用) 컴퓨터를 사용하여 해석(解析)이 가능하며, 그 결과(結果)는 전체를 분할하지 않고 해석한 결과(結果)와 일치(一致)하여 본(本) 해석(解析) 기법(技法)의 신뢰성(信賴性)을 입증할 수 있다.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.45-50
• /
• 2012

폭렬은 철근노출과 함께 구조부재의 단면을 감소시키며, 이로 인하여 구조적 거동에 심각한 문제를 발생시킨다. 고강도 콘크리트에 내화 모르터를 피복함으로서 화재시 폭렬을 방지할 수 있으며, 콘크리트 내의 철근의 온도상승을 지연시킬 수 있다. 본 연구의 목적은 이러한 고강도 콘크리트의 내화피복재로 활용하기 위한 것으로 퍼라이트와 폴리프로필렌 섬유로 경량 모르터를 제조하여 온도이력 성상을 파악하는데 있다. 이에 따른 실험인자로는 폴리프로필렌 섬유의 첨가량과 길이이다. 연구결과 폴리프로필렌 섬유를 첨가함으로서 모르터의 공극구조를 변화시킬 수 있었으며, 이는 내부 온도상승을 지연시킨다. 또한 고강도 콘크리트의 내화피복재로서 경량 모르터를 사용할 수 있는 가능성을 확인하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권1호
• /
• pp.125-129
• /
• 2011

The aim was to determine the relationship between muscle structure and meat quality traits in neuromuscular compartments (NMCs: R1, R2, R3, R4) of pig semitendinosus muscle. Barrows from the INTA-MGC genetic line (Argentina) were slaughtered at 100 kg body weight. In each NMC the following parameters were determined: the fibre types I, IIA, IIX and IIB by immunohistochemistry, the fibre cross sectional area (FCSA), the pH of meat after 24 h post-mortem ($pH_{24}$), instrumental meat tenderness (WB) and colour ($L^*$, $a^*$, $b^*$). There were significant differences in the following: $L^*$ (R1 = R4$a^*$ (R1>R4>R2 = R3), $b^*$ (R1 = R4R1 = R3 = R4), $pH_{24}$ (R1 = R4>R2 = R3). The relative percentages of FCSA were as follows: I (R4>R1>R3>R2), IIA (R1>R4>R3>R2), IIX (R1 = R2 = R3 = R4) and IIB (R2>R3>R1>R4). The correlation values were statistically significant between IIB and WB (R1 and R4, $r_s$ = 0.66), (R2 and R3 $r_s$ = 0.74), IIB and $L^*$ (R1 and R4 $r_s$ = 0.84), IIX and $L^*$ without discriminating NMCs. Our data suggest that the NMC where the sampling takes place is important for determining meat quality traits because of the heterogeneity of the whole muscle.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.397-401
• /
• 2008

Knowledge of dynamic characteristics of structural elements often can make difference between success and failure in the design of structure due to resonance effect. In this paper an analytical model of a cantilever beam having midpoint load is considered for structural optimization. This involves creating the geometry which allows parametric study of all design variables. For that purpose optimization of cantilever beam is elaborated in order to find the optimum geometry which minimizes its volume eventually for minimum weight using ANSYS. But such geometry could be obtained by different combinations of width and height, so that it may have the same cross sectional area yet different dynamic behavior. So for optimum safe design, besides minimum volume it should have minimum vibration as well. In order to predict vibration different dynamic analyses are performed simultaneously to solve the eigenvalues problem assuming no damping initially through MATLAB simulations using state space form for modal analysis, which identifies the resonant frequencies and mode shapes belonging to the lowest three modes of vibration. And next by introducing damping effects tip displacement, bending stress and the vertical reaction force at the fixed end is evaluated under some dynamic load of varying frequency, and finally it is discussed how resonance can be avoided for particular design. Investigation of results clearly shows that only structural analysis is not enough to predict the optimum values of dimension for safe design. Potentially this technique will meet maintenance and cost goals of many organizations particularly for the application where dynamic loading is invertible and helps a lot ensuring that the proposed design will be safe for both static and dynamic conditions.

• 한국전산구조공학회논문집
• /
• 제24권6호
• /
• pp.707-714
• /
• 2011

층간변위율은 구조물의 내진성능을 평가하는데 널리 사용되는 지표 중의 하나이다. 지진에 의해 발생하는 층간변위율이 클수록 지진에 의한 손상이 커지는 것으로 알려져 있다. 이러한 이유로 층간변위율을 감소시키는 설계기술은 내진설계분야에서 중요한 이슈이다. 그럼에도 불구하고 현재까지는 지진하중을 받는 구조물에 대한 현실적인 층간변위설계기법이 제시되고 있지 않다. 본 연구는 재분배 기법을 이용하여 철골모멘트골조의 내진성능을 향상시키기는 최적 층간변위설계기법을 제시한다. 이 기법은 층간변위율 차이를 최소화함으로써 구조물의 층별 층간변위율을 고르게 분포시키고, 최대 층간변위율을 감소시킨다. 이 기법은 단위하중법으로 계산된 변위기여도를 이용하여 구조재의 단면성능을 재설계하기 때문에 반복적인 구조해석없이 구조물의 내진성능을 향상시킬 수 있는 장점을 가진다. 이 기법의 효율성 검증을 위해 철골모멘트골조 예제 적용을 실시하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.167-173
• /
• 2017

In this paper, the characterization of the vertical position of trapped charges in the charge-trap flash (CTF) memory is performed in the novel CTF memory cell with gate-all-around structure using technology computer-aided design (TCAD) simulation. In the CTF memories, injected charges are not stored in the conductive poly-crystalline silicon layer in the trapping layer such as silicon nitride. Thus, a reliable technique for exactly locating the trapped charges is required for making up an accurate macro-models for CTF memory cells. When a programming operation is performed initially, the injected charges are trapped near the interface between tunneling oxide and trapping nitride layers. However, as the program voltage gets higher and a larger threshold voltage shift is resulted, additional charges are trapped near the blocking oxide interface. Intrinsic properties of nitride including trap density and effective capture cross-sectional area substantially affect the position of charge centroid. By exactly locating the charge centroid from the charge distribution in programmed cells under various operation conditions, the relation between charge centroid and program operation condition is closely investigated.

• 대한기계학회논문집B
• /
• 제40권11호
• /
• pp.737-744
• /
• 2016

인쇄기판형 열교환기는 집적도가 높고 구조적으로 견고하여 차세대 초임계 이산화탄소 발전 사이클용 열교환기로 각광받고 있다. 본 논문에서는 열원측과 열침측의 채널 크기가 상이한, 획기적인 형태의 인쇄기판형 열교환기에 대한 수치적 연구 결과를 보고한다. 초임계 이산화탄소를 작동유체로 하는 인쇄기판형 열교환기에 대해서 형상변수에 따른 전열성능을 해석하였으며, 그 결과 열원 혹은 열침측의 채널 직경이 증가함에 따라 유속 감소에 의해 전열성능이 단조적으로 감소하는 것을 확인하였다. 채널간격의 경우 열교환기의 전열성능에 크게 영향을 미치지 않는 것으로 나타났다. 또한 수력직경이 동일할 경우 채널 단면의 모양은 전열성능에 괄목할 만한 영향을 미치지 않는 것으로 나타났다.

• 한국직업건강간호학회지
• /
• 제27권3호
• /
• pp.180-189
• /
• 2018

Purpose: The aim of this study was to investigate the influence of nurses' awareness of healthcare accreditation on their job stress and turnover intention. Methods: Across-sectional correlation study design was used. Participants consisted of 143 nurses from two tertiary hospitals in Seoul and Gyunggido, South Korea. Data were collected in October 2016 using self-report questionnaires and analyzed using descriptive statistics, t-test, an ANOVA, Pearson's correlation coefficient, and multiple regression in SPSS/WIN 21.0. Results: Awareness of health care accreditation correlated negatively with job stress (r=-.63, p<.001) and turn over intention (r=-.50, p<.001). Awareness of health care accreditation was the factor that most influenced job stress, explaining 38% of the variance (F=23.10, p<.001). Awareness of health care accreditation and duty pattern were the factors that most influenced intention to leave, explaining 32% of the variance (F=10.35, p<.001). Conclusion: These findings suggest raising nurses' awareness of certification systems to reduce their job stress and turnover intentions. It will be necessary to provide support for the aggressive work nurses do and improve their work structure, highlighting the need for both manpower and institutional support. Accordingly, providing regular education programs and appropriate compensation schemes, by raising nurses' awareness of medical institutions' certification systems, is necessary.