• 멤브레인
• /
• 제17권3호
• /
• pp.219-232
• /
• 2007

침지침강 상변환법으로 폴리에테르설폰$(PES)-TiO_2$ 복합막을 제조하였다. 14 wt% 및 20 wt%의 PES/NMP 기준 고분자 용액에 $TiO_2$ 나노입자를 PES에 대해 $0{\sim}60$ wt%로 첨가량을 달리하여 복합막 제조에 사용될 캐스팅 용액을 준비하였다. 제조된 $PES-TiO_2$ 복합막의 막 특성과 몰폴로지를 $TiO_2$ 첨가량에 따른 캐스팅 용액의 점도, coagulation value, 광투과도와 복합막의 인장강도, 세공크기 및 접촉각, 표면 및 단면 SEM 사진, BSA 용액의 한외여과 실험을 통해 규명하였다. 캐스팅 용액에 첨가시킨 $TiO_2$ 입자의 함유량이 증가함에 따라 점도는 증가하고 coagulation value는 낮아져 캐스팅 용액의 열역학적 불안정성이 증가하였다. $TiO_2$ 입자의 첨가량이 증가함에 따라 1) 순간분리의 침강형식을 유지하면서 침강속도가 빨라졌으며, 2) 순수투과량, 세공크기 및 압밀화 안정성이 증가하며, 3) 인장강도와 접촉각은 감소하였다. $PES-TiO_2$ 복합막의 BSA 용액에 대한 전량여과식 한외여과 실험결과 $TiO_2$ 입자의 함유량이 증가함에 따라 막의 친수화 특성이 증가하여 투과플럭스가 증가하였으며, $TiO_2$가 첨가되지 않은 막과 비교하여 최대 7배까지 투과 플럭스가 향상되었다.

• Nutrition Research and Practice
• /
• 제5권3호
• /
• pp.246-252
• /
• 2011

Bioelectrical impedance analysis (BIA) models must be validated against a reference method in a representative population sample before they can be accepted as accurate and applicable. The purpose of this study was to compare the eight-electrode BIA method with DEXA as a reference method in the assessment of body composition in Korean adults and to investigate the predictive accuracy and applicability of the eight-electrode BIA model. A total of 174 apparently healthy adults participated. The study was designed as a cross-sectional study. FM, %fat, and FFM were estimated by an eight-electrode BIA model and were measured by DEXA. Correlations between BIA_%fat and DEXA_%fat were 0.956 for men and 0.960 for women with a total error of 2.1%fat in men and 2.3%fat in women. The mean difference between BIA_%fat and DEXA_%fat was small but significant (P < 0.05), which resulted in an overestimation of $1.2{\pm}2.2$%fat (95% CI: -3.2-6.2%fat) in men and an underestimation of $-2.0{\pm}2.4$%fat (95% CI: -2.3-7.1%fat) in women. In the Bland-Altman analysis, the %fat of 86.3% of men was accurately estimated and the %fat of 66.0% of women was accurately estimated to within 3.5%fat. The BIA had good agreement for prediction of %fat in Korean adults. However, the eight-electrode BIA had small, but systemic, errors of %fat in the predictive accuracy for individual estimation. The total errors led to an overestimation of %fat in lean men and an underestimation of %fat in obese women.

• 유통과학연구
• /
• 제14권5호
• /
• pp.81-89
• /
• 2016

Purpose - Prior researches have empirically focused on the effect of management consulting quality and consultant capability on entrepreneurial firms' performance. This study, however, focused on investigating the moderating role of absorptive capacity and resource capability between management consulting and entrepreneurial firms' performance. So, this study investigated the relationship among consulting quality, consultant capability, absorptive capacity, resource capability, and entrepreneurial firms' performance from the resource based view (RBV). Especially, this study focused on the mediating role of absorptive and resource capability in relational structure of entrepreneurial firms' dimensions. Research design, data, and methodology - In this study, research hypotheses and model are established by the prior researches from the fields of strategic management and entrepreneurial behavior. Concretely, H1~H4 are the relationship between consulting (consulting quality, consultant capability) and innovation (absorptive capacity, resource capability); H5 is the relationship between absorptive capacity and resource capability; and H6~H7 are the relationship between innovation (absorptive capacity, resource capability) and management performance. The data was collected 207 copies from entrepreneurial firms in South Korea. These firms were established in January 2014 and maintained by November 2015 in high-tech industry. The questionnaire was consisted of five dimensions; consulting quality, consultant capability, absorptive capacity, resource capability, and management performance. Each dimension measured multi items on a 5-point Likert scale. The hypotheses and research model are analyzed using structural equation modeling (SEM) with AMOS 22. Results - The results of this study are as follows. 1) Consulting quality significantly influenced on the absorptive capacity of entrepreneurial firms. 2) But, consultant capability did not influence on the absorptive capacity of entrepreneurial firms. 3) Consulting quality and consultant capability significantly influenced on the resource capability of entrepreneurial firms. 4) Absorptive capacity significantly influenced on the resource capability of entrepreneurial firms; 5) Absorptive capacity did not significantly influence on the management performance of entrepreneurial firms. 6) Resource capability, however, significantly influenced on the management performance of entrepreneurial firms. By these results, absorptive capacity of entrepreneurial firms had a mediating role partly among consulting quality, consultant capability, and management capability. The resource capability of entrepreneurial firms had a mediating role among consulting quality, consultant capability, and management capability, perfectly. Conclusions - According to this study, the high level of consulting quality and consultant capability may enforce the resource capability of entrepreneurial firms. It means, practically, that external knowledge is a driver for innovation, and then the innovation effects on the management performance of entrepreneurial firms. So, at the initial stage, the management consulting programs are very important to entrepreneurial firms and should be conceived as an essential element. This study may contribute to the advancement of academic in field of new start business, small business, or venture business based on resources, especially the role of absorptive capacity and resource capability between consulting programs and management performance. However, this study has some limitations. They are the measurement of consulting quality's items, cross-sectional research, and the limitation of concept and industry.

• 한국터널지하공간학회 논문집
• /
• 제16권2호
• /
• pp.249-260
• /
• 2014

열차가 고속으로 터널을 진입할 때 압축파가 발생하게 된다. 이 압축파가 터널 출구부에 도달하면 일부는 외부로 방출되고 일부는 팽창파의 형태로 반사되어 터널내부로 전파된다. 이러한 파는 충격파의 형태로 외부로 방출되는데, 이를 미기압(micro pressure wave)이라고 한다. 미기압파는 터널 출구부에 소음 및 진동문제를 일으키며, 이 현상이 클수록 민가 및 주변 유리창에 손상과 거주자의 불안을 일으키는 원인이 된다. 따라서 고속철도 건설을 위해서는 미기압에 대한 대책과 이에 대한 예측이 필요한 실정이다. 이에 본 연구는 운영중인 터널에서의 미기압 측정사례와 터널내 압력기울기에 대한 수치해석을 통하여, 차량의 전두부 형상 및 터널 갱구부 형상에 따른 영향을 분석하였다. 그 결과로, 본 연구에서는 미기압파의 강도를 예측하는 방법을 제시하였으며, 이를 통해서 터널 연장과 단면적에 따른 미기압 강도를 해석하였다.

• Nutrition Research and Practice
• /
• 제8권3호
• /
• pp.336-341
• /
• 2014

BACKGROUND/OBJECTIVE: It is expected that dairy products such as cheeses, which are the main source of cholesterol and saturated fat, may lead to the development or increase the risk of cardiovascular and metabolic diseases; however, the results of different studies are inconsistent. This study was conducted to assess the association between cheese consumption and cardiovascular risk factors in an Iranian adult population. SUBJECTS/METHODS: Information from the Isfahan Healthy Heart Program (IHHP) was used for this cross-sectional study with a total of 1,752 participants (782 men and 970 women). Weight, height, waist and hip circumference measurement, as well as fasting blood samples were gathered and biochemical assessments were done. To evaluate the dietary intakes of participants a validated food frequency questionnaire, consists of 49 items, was completed by expert technicians. Consumption of cheese was classified as less than 7 times per week and 7-14 times per week. RESULTS: Higher consumption of cheese was associated with higher C-Reactive Protein (CRP), apolipoprotein A and high density lipoprotein cholesterol (HDL-C) level but not with fasting blood sugar (FBS), total cholesterol, low density lipoprotein cholesterol (LDL-C), triglyceride (TG) and apolipoprotein B. Higher consumption of cheese was positively associated with consumption of liquid and solid oil, grain, pulses, fruit, vegetable, meat and dairy, and negatively associated with Global Dietary Index. After control for other potential confounders the association between cheese intake and metabolic syndrome (OR: 0.81; 96%CI: 0.71-0.94), low HDL-C level (OR: 0.87; 96%CI: 0.79-0.96) and dyslipidemia (OR: 0.88; 96%CI: 0.79-0.98) became negatively significant. CONCLUSION: This study found an inverse association between the frequency of cheese intake and cardiovascular risk factors; however, further prospective studies are required to confirm the present results and to illustrate its mechanisms.

• 대한치과보철학회지
• /
• 제38권2호
• /
• pp.200-213
• /
• 2000

Lasers have given dentistry a new rapid, economic, and accurate technique for metal joining. Although laser welding has been recommended as an accurate technique, there are some limitations with this technique. For example, the two joining surfaces must have a tight-fitting contact, which may be difficult to achieve in some situations. The tensile samples used for this study were made from a custom-made pure titanium and type III gold alloy plates. 27 of 33 specimens were sectioned perpendicular to their long axis with a carborundum disk and water coolant. Six specimens remained and served as the control group. A group of 6 specimens was posed as butt joints in custom parallel positioning device with a feeler gauge at each of three gaps : 0.00, 0.25. and 0.50mm. All specimens were then machined to produce a uniform cross-sectional dimension, none of the specimens was subjected to any subsequent form of heat treatment. Scanning electron microscopy was performed on representative tested specimens at fractured surfaces in both the parent metal and the weld. Vickers hardness was measured at the center of the welds with a micropenetrometer using a force of 300gm for 15 seconds. Measurement was made at approximately $200{\mu}m\;and\;500{\mu}m$ deep from each surface. One-way analysis of variance (ANOVA) and Scheffe's test was calculated to detect differences between groups. The purpose of this study is to compare the strength and properties of the joint achieved at various butt Joint gaps by the laser welding of type III gold alloy and pure titanium tensile specimens in an argon atmosphere. The results of this study were as follows : 1. When indexing and welding pure titanium, there was no decrease in ultimate tensile strength as compared with the unsectioned alloys for indexing gaps of 0.00 to 0.50mm, although with increasing gap size may come increased distortion (p>0.05). 2. When indexing and welding type III gold alloy, there were significant differences in ultimate tensile strength among groups with weld gaps of 0.00mm, 0.25 and 0.50mm, and the control group. Group with butt contact without weld gap demonstrated a significant higher ultimate tensile strength than groups with weld gaps of 0.25 and 0.50mm (p<0.05). 3. When indexing and welding the different metal combination of type III gold alloy and pure titanium, there were significant differences in ultimate tensile strength between groups with weld gaps of 0.00, 0.25, and 0.50mm. However, the mechanical properties of the welded joint would become too brittle to be acceptable clinically (p<0.05). 4. The presence of large pores in the laser welded joint appears to be the most important factor in controlling the tensile strength of the weld in both pure titanium and type III gold alloy.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.270-274
• /
• 2016

양 벽면이 수축되는 채널에서 ${\vee}/{\wedge}$형 리브의 각도가 열전달에 미치는 효과를 실험적으로 조사하였다. 한 벽면에만 설치된 ${\vee}/{\wedge}$형 리브의 충돌 각은 각각 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 그리고 $90^{\circ}$이다. 리브의 높이(e)는 10 mm 그리고 리브 간격(p)과 높이(e)비는 10으로 제작하였다. 길이가 1,000 mm인 시험 부는 입구의 단면적은 $100mm{\times}100mm$, 출구는 $50mm{\times}100mm$으로 제작하였다. 레이놀즈수가 22,000에서 75,000까지의 범위에서 실험을 수행하였다. 연구결과 전체적으로 레이놀즈 수가 높을수록 누셀트 수가 컸고, ${\wedge}$형 $45^{\circ}$ 리브가 가장 누셀트 수가 컸다.

• Design & Manufacturing
• /
• 제14권1호
• /
• pp.1-7
• /
• 2020

In this study, the variation of the shrinkage in the thickness direction of the molded parts according to the gate size of the polymer core fabricated through the 3D printer using the SLS method was studied. The polymer cores are laser sintered and the powder material is nylon base PA2200. The polymer cores have lower heat transfer rate and rigidity than the metal core due to the characteristics of the material. Therefore, the injection molding test conditions are set to minimize the deformation of the core during the injection process. The resin used in the injection molding test is a PP material. The packing condition was set to 80, 90 and 100% of the maximum injection pressure for each gate size. The runner diameter used was ∅3mm, and the gates were fabricated in semicircle shapes with cross sections 1, 2, and 3 ㎟, respectively. Thickness measurement was performed for 10 points at 2.5 mm intervals from the point 2.5 mm away from the gate, and the shrinkage to thickness was measured for each point. The shrinkage rate according to the gate size tends to decrease as the cross-sectional area decreases as the maximum injection pressure increases. The average thickness shrinkage rate was close to 0% when the packing pressure was 90% for the gate area of 1mm2. When the holding pressure was set to 100%, the shrinkage was found to decrease by 3% from the standard dimension due to the over-packing phenomenon. Therefore, the smaller the gate, the more closely the molded dimensions can be molded due to the high pressure generation. It was confirmed that precise packing process control is necessary because over-packing phenomenon may occur.

• Journal of the Korean Data and Information Science Society
• /
• 제24권6호
• /
• pp.1199-1210
• /
• 2013

오늘날 높은 실업률은 대부분의 국가에서 중요한 문제 중의 하나이다. 한편 소지역의 노동 관련 통계에 대한 요구가 지난 몇년간 급속도로 증가하였다. 그러나 대부분의 공식통계를 생산하기 위한 표본설계는 대영역의 통계를 생산할 목적으로 설계되기 때문에 소지역의 경우 배정되는 표본조사단위수가 극히 적어 신뢰성 있는 통계 산출이 어렵다. 그리고 소지역 추정에 대한 대부분의 기존 연구들은 특정 시점에서의 추정에 국한되어 왔다. 그러나 대부분의 공식통계들은 월, 분기 또는 연 단위로 측정되는 패널자료이기 때문에 이를 고려한 추정방법이 필요하다. 본 논문에서는 패널자료의 분석을 위해 유용하게 사용되고 있는 일반화추정방정식의 비모수적 버전인 일반화커널추정방정식을 도출하여 조사시점을 고려한 소지역 실업률의 추정에 활용하는 방안을 제안한다. 모의실험을 통하여 일반화커널추정방정식 방법, 일반화추정방정식 방법 및 일반화선형모형과 비교한다. 그리고 2005년 1월부터 12월까지 경상남도 및 울산광역시의 25개 시군구의 경제활동인구조사의 패널자료에 위에서 언급한 세 가지 방법을 적용하여 해당 소지역의 월별 실업률을 추정한다.

• 한국지반환경공학회 논문집
• /
• 제17권7호
• /
• pp.35-42
• /
• 2016

국내 및 해외에서 진행되고 있는 간척사업은 대규모 매립재가 필요하나 육상에서 얻을 수 있는 매립재는 한정되어 있어 해상준설토를 활용하기 위한 지반 정보화 관련 연구가 활발히 진행되고 있다. 이러한 연구의 일환으로 준설지역 지반조사 자료의 디지털 공간 정보화를 통해 신뢰도가 고려된 3차원 준설 물량의 자동 산출이 가능한 GIS 기반의 준설 매립지반 DB 구축 및 3차원 준설 매립 정보화 프로그램을 개발하였다. 현장에서 준설된 물량과의 비교 검증에 앞서 본 연구에서는 수집된 새만금 지역의 군장항 인근 지반조사 자료를 바탕으로 개발된 프로그램과 3차원 준설 매립 정보화 상용 프로그램으로 지반정보의 3차원 가시화를 수행하였다. 이를 토대로 가시화 수준, 각 지층의 단면 및 심도, 정량적 준설 물량 산출 결과를 비교하여 개발 프로그램에 대한 적정성을 평가하였으며, 평가결과 각각 산출된 준설 물량은 일치하는 것으로 나타났다.