• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.288-296
• /
• 2013

본 연구의 목적은 수근관증후군 뇌졸중 환자에서 경직정도에 따른 정중신경 단면적, 신경전도속도 및 상지기능 차이를 알아보고자 하였다. 연구대상은 성인 뇌졸중 환자 42명에서 CTS군 21명과 Non-CTS군 21명으로 선정하였다. 측정방법으로는 정중신경 단면적, 신경전도속도, GST, FMAS, CTS-FSS로 측정하였다. 연구결과, CTS군과 Non-CTS군 간 각 등급에서 정상측(p<.001)과 마비측(p<.001)의 정중신경 단면적, 정중 운동신경과 감각신경 기시잠시는 통계학적으로 유의한 차이가 있었다. CTS군과 Non-CTS군 간 각 등급에서 GST(p<.05), FMAS(p<.05), CTS-FSS(p<.001)는 통계학적으로 유의한 차이가 있었다. 본 연구는 수근관에 대한 병리역학적 내용을 제시함으로서 뇌졸중 환자의 상지기능훈련 시 고려해야할 내용 중 하나임을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제41권6호
• /
• pp.219-227
• /
• 2020

In this study, we tried to quantify the actual cross-sectional area inside the bore when scanning by the MRI system with various bore sizes. To this end, a comparative analysis was conducted by both of blueprint of each MRI equipment and actual measurement in the field. As a result of analysis, ACSA(Actual Cross-Sectional Area) in Ingenia CX, Elition X, uMR 780, Omega, Vida, Lumina, Architect, Premier is recorded as 171230, 232150, 242100, 309332, 230760, 230760, 229380 and 235990 ㎟, respectively ACSA% was 60.6, 60.3, 73.0, 70.0, 60.0, 60.0, 59.6, and 61,3%. In addition, DTB (Distance from Table top to Bore top) recorded 400, 407, 445, 495, 405, 405, 405, 403, and 412 mm. Through this study, it was confirmed that there is a difference between the bore size according to each MRI system and the actual cross-sectional area during MRI scanning. Accordingly, if we consider the internal actual area just not bore size at the clinical site, useful diagnostic images can be obtained in the end with better convenience.

• 근관절건강학회지
• /
• 제23권2호
• /
• pp.84-94
• /
• 2016

Purpose: This research aimed to identify levels of nurses' perception and practice of fluid intake and output (I & O) measurement and to explore the relationship between perception and practice of it. Methods: Using a cross-sectional survey design, 195 nurses who practiced fluid I & O measurement were recruited from a general hospital. Nurses who agreed to participate in this study completed a structured study questionnaire to assess their levels of perception and practice of fluid I & O measurement. Results: A level of perception of I & O measurement was high (3.46 points out of 5), and scores for 3 subdomains of I & O (importance, accuracy, and efficacy) were evenly high. The level of practice of I & O was fairly high (3.76 points out of 5). Perception and practice of I & O were highly correlated (r=.73, p<.001). Conclusion: Nurses seem to have higher levels of perception and do practice fluid I & O measurement correctly. In order to have reliable and valid I & O measures, nurses need to have continuous education on I & O measurement based on clinical guideline to utilize it as an invaluable clinical instrument.

• 복식문화연구
• /
• 제19권6호
• /
• pp.1347-1358
• /
• 2011

This study purposed to analyze differences in body measurement between the 2D direct body measuring method and the 3D body scan measuring method and to perform the appearance evaluation and cross-sectional evaluation of the fit of pants to which body measurements obtained by each measuring method were applied. Body measuring was conducted in 10 women in their 20s-30s using 2D direct body measuring and 3D automatic measuring with Hamamatsu body scanner. Among the 10 women, 3 participated in experimental garment wearing. Experimental pants were made using their 2D direct body measurements and 3D automatic measurements, and wearing tests were performed through expert evaluation and cross-sectional evaluation. The results of the experiment were as follows. According to the results of comparative analysis on differences between 2D direct body measurements and 3D scan measurements, 3D automatic measurements were significantly larger in bust circumference, ankle circumference, armscye circumference, shoulder length, scye depth, and arm length. As circumferences measured with the 3D body scanner were somewhat larger than directly measured ones, it is suggested to adjust ease when using existing pattern making methods. We prepared experimental garments by the same pattern making method through applying body measurements obtained with the two measuring methods, and assessed the fit of the garment comparatively through expert evaluation and 3D scan cross-sectional evaluation. According to the results, 2D-pants using 2D direct body measurements was slightly tighter than 3D-pants using 3D measurements in waist circumference, hip circumference, and abdominal circumference. In the results of comparing appearance in terms of the fit of the experimental garment in each subject, significant difference was observed in most of the compared items. This result suggests that 3D automatic body measuring data may show different accuracy according to body shape and therefore it is necessary to examine difference between 2D direct body measurements and 3D automatic measurements according to body shape.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.64-70
• /
• 2013

The heat transfer and friction factor characteristics of turbulent flows in three stationary channels have been investigated experimentally to check out the effect of divergence ratio. These are a constant cross-sectional channel and two diverging channels with ratio of divergence(Dho/Dhi) of 1.16 and 1.49. The measurement was conducted within the range of Reynolds numbers from 15,000 to 89,000 and the dimension of uniform cross-sectional test section is $100mm{\times}100mm$ at the cross section and 1,000 mm in length. The measurements of heat transfer coefficients and friction factors in the uniform channels were conducted as a reference. Because of the streamwise flow deceleration, the heat transfer and friction factor characteristics in the diverging channel were quite different from those of the constant cross-sectional channel. The effective friction factors and convective heat transfer coefficients increased with increasing the ratio of divergence of the channel.

• 터널과지하공간
• /
• 제11권2호
• /
• pp.146-155
• /
• 2001

터널 유지관리 단계의 계측을 통해 획득한 내공변위 자료를 이용하여 라이닝 단면에 작용하는 축력 및 휨 모멘트의 단면력을 역산하기 위한 기법을 제시하였다. 계측을 위해 Digital방식의 DOCS시스템을 지하철 단면에 적용하였다. 역산결과 매설식 계측기기에 의해 측정된 측정하중과 일치함을 알 수 있어 기법의 효용성이 입증되었다. 또한, 계측기 센서의 진동, 시험 열차 운행, 터널내 온도변화 및 고전압에 의한 영향을 검토하여 향후 유지관리 방안을 제시 하였다.

• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.18-24
• /
• 2016

This paper presents an experimental investigation to visualize cross-sectional two-phase flow structure and identify liquid-gas interface for condensation of steam at a low mass flux in a slightly inclined tube using the axial-viewing technique, which permits to look directly into flow during condensation of steam. In this technique, two-phase flow is viewed along the axis of a pipe by locating a high-speed video camera in front of a viewer that is fitted at the outlet of the pipe. A short section of the pipe is illuminated and is recorded through the viewer, which is kept free of liquid by mildly introducing air. Experiments were conducted in a pipe of 19.05 mm in inner diameter at atmospheric pressure. Cross-sectional two-phase flow structure is obtained at a steam mass flux of $2.62kg/m^2s$ as a function of steam quality in the range from 0.5 to 0.9. The results show that stratified-wavy flow is a unique flow pattern observed in the scope of the present study. Condensate film thickness, stratification angle and void fraction were measured from the obtained flow structure images. Finally, heat transfer coefficient was calculated using the measurement data and discussed in comparison with existing correlations.

• Journal of Korean Neurosurgical Society
• /
• 제46권3호
• /
• pp.199-204
• /
• 2009

Objective : This study was done to evaluate the correlation between carpal tunnel pressure (CTP), electrodiagnostic and ultrasonographic findings in patients with carpal tunnel syndrome (CTS). Methods : CTP was measured during endoscopic carpal tunnel release (ECTR) for CTS using Spiegelberg ICP monitoring device with parenchymal type catheter. Neurophysiologic severity and nerve cross sectional area were evaluated using nerve conductive study and ultrasonography (USG) before ECTR in all patients. Results : Tests were performed in a total of 48 wrists in 39 patients (9 cases bilateral). Maximum CTP was $56.7{\pm}19.3$ mmHg ($Mean{\pm}SD$) and $7.4{\pm}3.3$ mmHg before and after ECTR, respectively. No correlation was found between maximum CTP and either neurophysiologic severity or nerve cross sectional area, whereas we found a significant correlation between the latter two parameters. Conclusion : CTP was not correlated with neurophysiologic severity and nerve cross sectional area. Dynamic, rather than static, pressure in carpal tunnel might account for the basic pathophysiology of CTS better.

• Wind and Structures
• /
• 제38권6호
• /
• pp.445-459
• /
• 2024

To model the aeroelasticity in vortex-induced vibrations (VIV) of slender tubular towers, this paper presents an approach where the aerodynamic damping distribution along the height of the structure is calculated not only as a function of the normalized lateral oscillation but also considering the local incoming wind velocity ratio to the critical velocity (velocity ratio). The three-dimensionality of aerodynamic damping depending on the tower's displacement and the velocity ratio has been observed in recent studies. A contour map model of aerodynamic damping is generated based on the forced vibration tests. A sectional calculation procedure based on the spectral method is developed by defining the aerodynamic damping locally at each increment of height. The proposed contour map model of aerodynamic damping and the sectional calculation procedure are validated with full-scale measurement data sets of a rotorless wind turbine tower, where good agreement between the prediction and measured values is obtained. The prediction of cross-wind response of the wind turbine tower is performed over a range of wind speeds which allows the estimation of resulting fatigue damage. The proposed model gives more realistic prediction in comparison to the approach included in current standards.

• 한국의류학회지
• /
• 제24권6호
• /
• pp.895-906
• /
• 2000

The study planned to testify the accuracy of the 3D scanner through analyzing the human body measurement method and the evaluation of flare skirt with 3D scanner. The results obtained from this study were as follows; First, the results of measurement for the dress form and human body by 3D scanner were more accurate than one or two dimensional measurement method. Second, from the results of the scan for the flare skirts as worn the human body, we could obtain very accurate horizontal section map. Third, in the clothing ergonomics viewpoint, the accuracy of the 3D scanner was very excellent and its utility was higher than that of the moir photography method. Therefore, the 3D scanner is very useful for the human body measurement and the wearing evaluation. In a nutshell, this study illustrates that we have to develop a program of automatic human body measurement system which will enhance the application of the 3D scanner.