• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.38-42
• /
• 2001

A complete quantitative understanding of DT has been difficult because the process represents such a broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. There are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.3
• /
• pp.15-22
• /
• 2019

Background: The purpose of this study is to explore the effect of the functions of GMFM and ICF-CY on the activities and participation of ICF-CY sub-items. Design: Cross-sectional study. Method: This study compared and analyzed 95 children with cerebral palsy [type of CP: spasticity 86 (90.5%), hypotonia 4 (4.2%), mixed 5 (5.3%); type of palsy: quadriplegia 13 (13.7%), diplegia 71 (74.7%), hemiplegia 11 (11.6%)] using sub-items of functions, activities and participation from GMFM and ICF-CY. Result: The results show that the activities and participation of ICF-CY (9 sub-items) have significant effect on the functions of GMFM and ICF-CY (8 sub-items) (p<0.05). Conclusion: It is intended to provide data to establish practical therapeutic goals and interventions for functions, activities and participation, which are sub-categories of ICF-CY in cerebral palsy.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.593-603
• /
• 2005

Passive sampler using 4-amino-3-hydrazino-5-mercapto-1, 2, 4-triazole (AHMT) was developed to determine formaldehyde in indoor environment. The chromatography paper cleaned by $3\%$ hydrogen peroxide solution was experimently determined as a optimum absorbtion filter for the collection of formaldehyde. The passive sampler with a broad cross-sectional area and a short diffusion length was quite good in sensitivity. The passive sampler and the active sampling method with an impinger were strongly correlated with a correlation coefficient of 0.9848. The limits of detection and quantification of the passive sampler for the measurement of formaldehyde in the indoor environment were 7.5 and 10.2 ppb, respectively. Temperature ($19\∼28^{circ}C$) and relative humidity ($30\∼90\%$) had slight influence on the sampling rate of the passive sampler. However, the increase of flow velocity on the surface of sampler resulted in the increase of sampling rate.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.3
• /
• pp.81-93
• /
• 2018

This study developed and tested the impact of hallyu 4.0, social media, and consumer ethnocentrism on the decision to purchase Korean products of Generation C in Vietnam. Both qualitative and quantitative methodologies were utilized in this study. Qualitative research was first carried out with in-depth interview, conducted to derive measurement items for the interested constructs. Quantitative research used cross-sectional field design by pilot study and official study. The model was tested and developed using data collected by questionnaires, from a sample of 575 respondents, by both electronic and paper surveys with non-probability and convenience sampling techniques. SPSS 20 and AMOS 20 software were employed to analyze the data. The results of structural equation modeling showed that hallyu 4.0, social media, and consumer ethnocentrism influenced the intermediates variables: subject norms, trust, attitude and behavioral intention and influenced purchase decision. The hallyu 4.0, social media, and consumer ethnocentrism are independent variables. They impact purchase decision through mediating variables such as trust, subjective norms, attitude and behavioral intention. Social media influences not only to trust but also to subjective norms. Subjective norms influence on purchase decision. This study also discovers an interesting fact that trust and attitude variables have an impact on behavioral intention and purchase decision.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.4
• /
• pp.1-3
• /
• 2005

Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.538-541
• /
• 2006

PSC(Prestressed Concrete) box girder bridges have been widely applied in Korea. A number of these bridges have been built by the segmental construction method in the longitudinal direction and(or) vertically along the cross-sectional depth with MSS(Moving Scaffolding System). An actual 2-span continuous PSC box girder bridge of Kyeongbu high speed railway was selected and instrumented with 96 vibrating wire embedded type strain gauges and 2 thermocouples. The long-term behavior of the bridge was monitored through two major points located at mid-span of the first span and at the internal support. Data collection started just after the casting of the first segment (U section). Concrete strain and temperature data were gathered regularly by a data logger (CR10) during 600 days under and after construction. According to this measurement, the parabolic longitudinal strain distribution in the top slab at mid-span is shown. And also, the same distribution at the interior support is shown. The compressive strains at the cantilever region are larger than at the web position and the internal part in the top slab. Strain difference largely happened during the early construction period.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.22 no.1
• /
• pp.27-34
• /
• 2016

Background: The purpose of this study was to investigate the immediate effects of neuro-dynamics technique (NDT) to the balance and gait for chronic stroke patients. Methods: This study was composed of the cross-sectional design. Nine patients with chronic stroke applied to NDT. Balance ability function was measured using the Good Balance System device for static balance, timed up and go test (TUG) and functional reach test (FRT) for dynamic balance. The 10 meter walk test (10MWT) and GAITRite device were used for measurement of gait ability for patients. Results: There were significant improvements were observed on dynamic balance ability (p<.05) and gait ability function (p<.05). Conclusions: This research shows that the NDT is immediate effective on dynamic balance and gait ability of the chronic stroke patients. Further studies may be needed to continuously intervention of NDT for more patients.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.905-914
• /
• 2001

A large eddy simulation(LES) is performed for turbulent flow around a bluff body inside a sudden expansion cylinder chamber, a configuration which resembles a premixed gas turbine combustor. To promote turbulent mixing and to accommodate flame stability, a flame holder is installed inside the combustion chamber. The Smagorinsky model is employed and the calculated Reynolds number is 5,000 based on the bulk velocity and the diameter of the inlet pipe. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The predicted turbulent statistics are evaluated by comparing them with the laser-doppler velocimetry (LDV) measurement data. The agreement of LES with the experimental data is shown to be satisfactory. Emphasis is placed on the time-dependent evolutions of turbulent vortical structure behind the flame holder. The numerical flow visualizations depict the behavior of large-scale vortices. The turbulent mixing process behind the flame holder is analyzed by visualizing the sectional views of vortical structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.313-318
• /
• 1983

It is required in designing a spot welding to get in advance an estimated figure of nugget diameter. A method of estimating nugget diameter of low carbon steel sheets is suggested in tesms of utilizing elastic calculation in theory and of making a sectional observation of specimen of spot welding in experiment. The resultant findings are summarized as follows: 1) A contact diameter of sheet, 2.gamma.$_{o}$=d sub e/+(1.1)t, wheer de is the electrode tip diameter and t is the thickness of sheets. 2) The practical measurement of the nugget diameter reveals that $d_{n}$=(1.05) $d_{e}$+(0.9)t, and $d_{b}$ is less by 0.8-4.3% than 2.gamma.$_{o}$. 3) The more $d_{n}$ is as compared with t, the less the difference between a theoretical value and an experimental value is. 4) In the spot welding of thin steel sheets less than 3mm in thickness that are commonly used in sheet metal works, the contact diameter equals the nugget diameter. In this case, either the theoretical or experimental approach can be used for estimating the nugget diameter.meter.ter.r.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.957-960
• /
• 1997

A complete quantitative understanding of DT has been difficult because the process represents such s broad field of research. The experimental measurement of tool force is a single area of DT which still covers a wide range of possibilities. Here are numerous parameters of the process which affect cutting forces. There are also many turnable materials of current interest. To obtain information toward a better understanding of the process, a few cutting parameters and materials were selected for detail study. It was decided that free-oxygen copper and 6061-T6 alloy aluminum would be the primary test materials. There are materials which other workers have also used because of there wide use in reflective applications. The experimental phase of the research project began by designing tests to isolate certain cutting parameters. The parameters chosen to study were those that affected the cross-sectional area of the uncut chip. The specific parameters which cause this area to vary are the depth of cut and infeed per revolution, or feedrates. Other parameter such a tool nose radius and surface roughness were investigated as they became relevant to the research.