• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.769-776
• /
• 2000

RP(Rapid Prototyping) technology is gaining its popularity in building a prototype in all industries. SLS(Slective Laser Sintering) is one of RP technologies, which is focused on tooling processes as well as three dimension solid model. There are several factors, the length and the cross-sectional area of a part, that have an effect on build setup in SLS process. In this paper, the computation on geometrical relationship is used to slice STL file and to estimate these factors. Based on these values, the build setup parameters such as the heating temperature, the laser power, and the powder cartridge feed rate are determined by neural network approaches. The test results show that the computation time is saved and the neural network approach is able to apply to get the optimal parameters of build process within an acceptable error rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.180-183
• /
• 1997

The forming process of metal matrix composites by the die casting and squeeze casting process are limited in size and dimension in term of final parts without machining. The thixoforming process for metal matrix composites has numerous advantages compared to die casting, squeeze casting and compocasting. The characteristics of thixoforming process can decrease the liquid segregation because of he improvement in fluidity in a globular microstructure state and utilizes flow without air entrapment. Therefore, in order to obtain the sound parts of metal matrix composites by using thixoforming process which as co-existing solidus-liquidus pahse, it si very important to obtain reheating condition. However, for he thixoforming process, the billet with the desired volume fraction must be heated to obtain a uniform temperature distribution over the entire cross-sectional areas. To obtain the reheating conditions of composites, the particulate reinforced metal matrix composites for thixoforming were fabricated by combined stirring process which is simultaneously performed with electro-magnetic stirring process which is simultaneously performed with electro-magnetic stirring and mechanical stirring process.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.91-97
• /
• 2003

In rigid-plastic finite element method, there is a heavy computation time and convergence problem. In this study, revised rigid-plastic finite element method Will be introduced. This method is the way that restrict the convergence interval. In result, convergence problem and computation time due to large non-linearity in the existing numerical analysis method were no longer a critical problem. It is expected that various results from the numerical analysis will give very useful information for the design of tools in sheet metal forming process.

• 대한수학회보
• /
• 제44권4호
• /
• pp.795-806
• /
• 2007

We investigate F-traceless component of the conformal curvature tensor defined by (3.6) in $K\ddot{a}hler$ manifolds of dimension ${\geq}4$, and show that the F-traceless component is invariant under concircular change. In particular, we determine $K\ddot{a}hler$ manifolds with parallel F-traceless component and improve some theorems, provided in the previous paper([2]), which are concerned with the traceless component of the conformal curvature tensor and the spectrum of the Laplacian acting on $p(0{\leq}p{\leq}2)$-forms on the manifold by using the F-traceless component.

• 셀메드
• /
• 제10권1호
• /
• pp.3.1-3.4
• /
• 2020

Spirituality is the dynamic and inherent dimension of humanity. This study aimsto evaluate the relationship between Spiritual Health, Mindfulness and Emotion Regulation among French Emerging Adults. An online cross-sectional survey design consisted of four hundred and twenty-one samples were recruited from different universities at Strasbourg, France. Participant's age ranged from 18 to 28 years with a mean age of 20.77 years (SD=2.22). The results, highlights that Spiritual Health Measure was significant and positive association with Mindfulness (r=.45, p < .01) and Reappraisal (r=.22, p < .01). Further, the significant negative correlation observed with Spiritual Dissonance (r=.44, p < .01) and Suppression (r=.24, p < .01). These findings support emerging literature on Spiritual Health. Future studies should evolve an intervention model to promote Spiritual Health and Positive Health.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.205-212
• /
• 2003

Many people are exposed to accidents by vehicles or sports. The most frequent injuries by these accidents is concerned with a knee joint. The three-dimensional surface model of a knee is needed for dynamic analysis of knee motion and knee reconstruction. three-dimensional motion data of a knee joint were obtained using X-ray and precise magnetic sensors. The surface data of a femur and a tibia were obtained using cross-sectional pictures by CT. The three-dimensional surface models of a femur and a tibia were made by the method of optimal triangular patch. Using obtained motion data, we simulated the motion of three-dimensional knee joint model.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.115-115
• /
• 2013

In order to pinpoint the different factors responsible for magnetization reversal, we performed simulation using OOMMF micromagnetic package for rectangular shaped permalloy element having length of $1{\mu}m$, width 50-100 nm and thickness 15-80 nm with length to width ratio L/W>4. Interestingly an increase in coercivity with thickness is found for every width below a critical thickness. With increasing width and thickness, the distinct behavior of coercivity, hysteresis loops and reversal mechanism are presented. Vortex end domains are observed during the magnetization reversal beyond particular thickness, where the three dimension reversal mechanism is expected to begin, causing a sudden increase in coercivity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.718-723
• /
• 1998

The program which could determine cross-sectional dimension of the prestressed concrete box girder bridges at the stage of preliminary design was developed using the optimal technique in this study. It could minimize the cost required in the design of box girder bridges and the construction with the full staging method. Objective cost function consisted of six independent variables such as height of cross-section, jacking force and thickness of web and bottom flange. The SUMT(Sequntial Unconstrained minimization Technique) was used to solve the constrained nonlinear minimization optimal problem. Using the program developed in this study, optimum design was performed for existing bridges with one cell cross section of constant depth. The result verify the compatibility of the program.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.24-28
• /
• 2011

The purposes of this study are predictions of the changes in the section geometry and determination of the initial cross section so that opposite side in height direction is exactly parallel after coiling process. Finite element analysis is carried out for the calculation of the sectional changes for mold spring item. Analysis results reveal that the slope of the top and bottom sides varies in the range of 5 to 8 degrees and the amount depends on the dimension of the outer diameter. The slopes of the sides should be defined first among design variables.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.207-216
• /
• 2003

본 논문에서는 국내 서해안 연약 지반 현장에서 PBD 타설로 인한 교란 영역을 확인하기 위하여 현장지반에 10개의 간극수압계를 PBD 타설 위치로부터 10cm, 20cm, 30cm, 40cm 그리고 50cm 그리고 50cm 떨어져 설치하고 멘드렐을 이용한 PBD 강제 관입시 발생하는 과잉간극수압의 소산과정을 5m, 7m 깊이에서 측정하였다. PBD 타설로 인해 지반교란이 발생하면 연약점토 지반의 투수계수가 감소하게 되어 과잉간극수압의 소산시간에 영향을 미치게 되므로 PBD 타설거리로부터 PBD 타설 전후의 과잉간극수압 소산과정을 측정하여 Smear Zone의 범위를 정하였다. 또한 이러한 과잉간극수압 소산과정을 해석하여 PBD타설 전후의 지반 배수특성저하를 규명하였다. 과잉간극수압 소산을 해석하기 위하여 시험 지반의 강성지수가 필요한데 이러한 강성지수 측정을 위하여 Cone-Pressuremeter(CPM)시험을 병행하였다. 시험결과 멘드렐의 환산직경의 3.0-3.6배에 Smear Zone이 형성되는 것으로 조사되었으며 Teh & Houlsby의 식과 CPM을 이용한 수평압밀계수를 평가한 결과 PBD타설전후로 지반의 배수능력이 3-8배 저하된 것으로 계산되었다.