• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.128-131
• /
• 2004

This paper is to investigate the mock up test results of mass concrete for transfer girder using setting time difference with super retarding agent(SRA) to reduce hydration heat. According to test results, the temperature history of plain concrete without placing lift had a steep rising curvature, and plain concrete had a big temperature difference between surface and middle section of mass concrete, which may result in occurrence of temperature crack. However, considering placing method B, because setting time of middle section concrete was retarded with an increase in SRA contents, higher hydration heat temperature was observed at surface section concrete compared with that at middle section concrete at early age, which can lower the possibility of hydration heat crack. In case of placing method C, although peak temperature of hydration heat was much lower, at early age, high crack occurrence possibility of the hydration heat attributable to the big temperature difference between middle section and bottom section of concrete was expected at bottom section concrete. Therefore, the structure above the ground like transfer girder is not applicable to consider the placing method C.

• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.165-171
• /
• 2014

PURPOSES : The objective of this study is to find Percentile Speed($V_p$) for Appraisal of Road Section with Recurring Congestion. METHODS : Percentile Speed($V_p$) is determined by correlation analysis of CSI that proposed existing literature. and CSI(Consistency Service Index) is a index that subtract service fail frequency from 100 points, and service fail is defined as traffic situation is driving less than 80kph speed. In this study, We analyzed the highest correlation percentile speed associated with CSI. This speed is chosen as a delay decision speed. In order to verifying reliability, it performed a comparison with the previous method. RESULTS : As a result, 30 percentile speed($V_{30}$) was decided as index speed for judgement of recurring congestion section, and through comparison with existing methods, we demonstrated that 30 percentile speed can be useful for judgement of recurring congestion section. CONCLUSIONS : This method to Determine recurring congestion section using the percentile speed($V_{30}$) was proposed for the first time in this paper. This method can be applicated more quickly and easily than existing method for determining of recurring delay section.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.246-251
• /
• 2000

In the present study, the analysis on heat and fluid flow in the single screw extruder is carried out by simultaneously considering the metering section and the die. The finite difference method and the finite volume method are applied to the metering section and the die, respectively. The zonal method is used to couple the metering section and the die. To investigate the effect of die on the characteristics of heat and fluid flow in the single screw extruder, the pressure back flow is included in the analysis. The screw-tip rotation is also considered by employing the quasi 3-dimensional die model. The present results are compared with the numerical and experimental data available in the literatures.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.175-181
• /
• 1998

The coil spring is used in the suspension of automotive vehicles and small omnibus. Recently, it can be adopted hardening type spring which spring constant is accompanied by increasing displacement to increase passenger comfortability. One of methods which assert this characteristic is cylindrical-taper section coil spring. In this paper we calculate ideal spring characteristic curve from the given vehicle conditions, and show the design method of the cylindrical-taper section coil spring.

• The Korean Journal of Legal Medicine
• /
• 제42권4호
• /
• pp.141-145
• /
• 2018

There have been many radiographic studies on age estimation that evaluate reduction in size of dental pulp cavity with secondary dentin formation. The Paewinsky method reported high accuracy in estimating ages by measuring the width of the pulp cavity in panoramic radiographs. The aim of this study was to evaluate the application of the Paewinsky method to digital periapical radiographs. This study was conducted on 103 cases that reported to the Section of Human Identification of the National Forensic Service. The age was calculated by applying the Paewinsky method that measures the root and pulp canal width at three points in a tooth. The estimation results were compared with those calculated by the Johanson method. When the Paewinsky models were applied to digital periapical radiographs, the errors were significantly greater as compared to the original study. The errors of the maxillary second premolar and mandibular lateral incisor were greater than those of the maxillary central incisor, lateral incisor, mandibular canine, and first premolar. Furthermore, errors of the age estimation models in level C were greater than those in levels A and B. This study could be a reference for the application of the Paewinsky method to digital periapical radiographs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.221-224
• /
• 2006

For structural engineers, design of pile cap causes difficulties since design of this member is not specifically addressed by codes. In general, pile cap is considered as deep beam and designed for shear and moment at specified critical section. This is called as traditional section method. However, many international design codes suggest the application of strut tie method for better design of this member. In this paper, a brief application of strut tie method to the design check of pile cap structure designed by section method is presented. Unlike well known pile cap with single column, the example pile cap has two columns. In order to find out proper load path under various load condition, three dimensional finite element method was carried out. The result indicates that provided reinforcement by traditional section method has sufficient capacity to meet the design requirements.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.227-234
• /
• 2013

PURPOSES : In order to do an improving countermeasures for congestion on the highway with a limited budget, it is very important to select a habitual congestion section effectively. This study is develop CSI(Consitency Service Index) which contained the service for drivers on the highway to select a habitual congestion section. METHODS : By applying the concept of service for the users paying a fee, proposed CSI(Consistency Service Index) to determine habitual delay. CSI is mean that users using the highway road must be provided an environment which can driving more than 80kph, anytime, anywhere. RESULTS : The result applying developed method in this study included most of congestion sections selected by conventional method. but, in some section of existing non-congestion section were included by CSI. The annual average speed and CSI correlation analysis result was high correlation. This result proved that CSI was reflecting road traffic condition well. CONCLUSIONS : It was verified practicality from the delay section of gyeonggi-do area highway. we can judge whether or not to be a habitual congestion in the specific highway and do the traffic improving countermeasures accordingly.

• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.629-638
• /
• 2009

합성단면을 구성하는 콘크리트 단면에 크리프에 의한 장기변형이 발생되면 합성단면에는 추가의 변형이 발생되며 콘크리트 단면에는 장기변형의 일부구속으로 잔류응력이 발생한다. 이 논문에서는 복잡한 합성단면에서 콘크리트 단면의 장기변형에 대한 반응을 평가하는 기존의 단계별계산법을 보다 효율적으로 적용할 수 있도록 일반화 하였다. 장기변형이 발생하는 콘크리트 단면과 이 변형의 일부를 구속하는 구속단면의 단면특성과 재료특성으로부터 초기 합성단면의 환산단면특성이 유도되고, 각 단계의 크리프계수가 고려된 유효탄성계수가 적용된 환산 단면특성이 유도되었다. 합성단면의 일반화 반응에 대한 5개의 일반화 매개변수로 구성된 단계별계산법의 식이 유도되었다. 각 단계별 계산식에는 크리프계수의 증가가 일정하도록 하여 식의 단순화와 계산시간의 감축 및 균등한 단계별 계산오차가 가능한 균등 크리프 단계별계산법을 제안하였다. 콘크리트 단면의 초기 축방향 탄성 변형률에 대한 일반화 반응은 콘크리트 단면적의 비율에 가장 민감하고, 콘크리트 단면의 단면이차모멘트 비율보다는 구속단면의 단면이차모멘트 비율에 보다 민감하였다. 반면에 콘크리트 단면의 초기 탄성곡률에 대해서는 콘크리트 단면의 단면이차모멘트 비율에 가장 민감하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 춘계공동학술대회
• /
• pp.229-236
• /
• 2006

In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.309-313
• /
• 2003

In the country, already a 400 species and some Interchanges of different Section of Industry have been organized and a number of related industry come to a 4000 species. But in the present, Interchanges of different Section of Industry stay at a form of a friendly society as yet. In this study, we will be helpful to activity of Interchanges of different Section of Industry by concretely suggestion of the utility operation method of Interchanges of different Section of Industry in the many-sided point.