• 한국정보통신학회논문지
• /
• 제14권5호
• /
• pp.1295-1302
• /
• 2010

본 논문에서는 LVQ(Learning Vector Quantization) 네트워크를 이용한 수신 신호 세기(Received Signal Strength Indication) 기반 실내 위치인식 시스템을 제안하였다. 제안한 방식의 유용성을 확인하기 위하여 실험을 수행하였고, 일반적인 삼각측량 방법과 비교하였다. 실험실을 40개의 영역으로 나누고 6개의 고정 노드를 설치하였다. 무선 채널의 대수-정규 경로 손실 모델을 구성하고, 수신 신호 강도를 거리로 변환하였다. 변환한 정보를 LVQ의 입력으로 사용하였다. LVQ 네트워크의 학습을 위해 영역의 인덱스를 목표값으로 설정하였다. 실험을 통해서 최적의 서브클래스 개수를 결정하였고, LVQ 네트워크의 훈련을 통해서는 96%, 테스트를 통해서는 91%의 성능을 확인하였다.

• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.299-311
• /
• 2018

As engineered timber such as Glulam is seeing increasing use in tall timber buildings, building codes are adapting to allow for this. In order for this material to be used confidently and safely in one of these applications, there is a need to understand the effects that fire can have on an engineered timber structural member. The post-fire resilience aspect of glulam is studied herein. Two sets of experiments are performed to consider the validity of zero strength guidance with respect to short duration fire exposure on thin glulam members. Small scale samples were heated in a cone calorimeter to different fire severities. These samples illustrated significant strength loss but high variability despite controlled quantification of char layers. Large scale samples were heated locally using a controlled fuel fire in shear and moment locations along the length of the beam respectively. Additionally, reduced cross section samples were created by mechanically carving a way an area of cross section equal to the area lost to char on the heated beams. All of the samples were then loaded to failure in four-point (laterally restrained) bending tests. The beams that have been burnt in the shear region were observed as having a reduction in strength of up to 34.5% from the control beams. These test samples displayed relatively little variability, apart from beams that displayed material defects. The suite of testing indicated that zero strength guidance may be under conservative and may require increasing from 7 mm up to as much as 23 mm.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권5호
• /
• pp.254-259
• /
• 2019

Objectives: Crown-root fracture and cervical caries in maxillary premolars constitute a challenge in cases of subgingival placement of restoration margins. Surgical extrusion has been practiced successfully in permanent anterior teeth. The aim of the present retrospective study was to assess the clinical outcome of surgical extrusion after orthodontic extrusion in maxillary premolars. Materials and Methods: Twenty-one single, tapered root maxillary premolars with subgingival crown-root fracture or caries were included. Presurgical orthodontic extrusion was performed on all teeth to prevent root resorption. Extent of extrusion and rotation was determined based on crown/root ratio. The postoperative splinting period was 7 to 14 days. Clinical and radiographic examination was performed at an interval of 1, 2, and 3 months. Results: After the mean follow-up of $41.9{\pm}15.2months$, failure was observed as increased mobility in 3 of 21 cases. No significant difference was observed in the outcome of surgical extrusion based on tooth type, age, sex, $180^{\circ}$ rotation, or time for extraction. Furthermore, marginal bone loss was not observed. Conclusion: Surgical extrusion of maxillary premolars can be a possible therapeutic option in cases of subgingival crown-root fracture.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.13.1-13.6
• /
• 2020

Background: The aim of this study was to evaluate the factors that may affect implant fixture fractures. Methods: Patients who experienced implant fixture removal at Seoul National University Bundang Hospital from 2007 to 2015 due to implant fixture fracture were included. Implant/crown ratio, time of implant fracture, clinical symptoms before implant fracture, treatment of fractured implants, and the success and survival rate of the replaced implants were evaluated retrospectively. Results: Thirteen implants were fractured in 12 patients. Patient mean age at the time of fracture was 59.3 years. Of the 13 implants, 7 implants were placed at our hospital, and 6 were placed at a local clinic. The mean crown/implant ratio was 0.83:1. The clinical symptoms before fracture were screw loosening in five implants, marginal bone loss in five implants, and the presence of peri-implant diseases in five implants. All the fractured implants were removed, and 12 out of the 13 sites were re-implanted. Parafunctions were observed in two patients: one with bruxism and one with attrition due to a strong chewing habit. Conclusions: Several clinical symptoms before the fracture of an implant can predict implant fixture failure. Therefore, if these clinical symptoms are observed, appropriate treatments can be taken before more serious complications result.

• 한국추진공학회지
• /
• 제26권6호
• /
• pp.53-61
• /
• 2022

본 연구에서는 CBT(Closed Bomb Test)시험을 통하여 고체추진제의 연소효율을 추정하는 방법을 제시하였다. CBT는 수백 기압에서 작동하므로 실기체의 영향을 고려하기 위해 Noble-Abel 상태방정식을 적용하였다. 또한 밀폐용기 벽면으로 발생하는 열손실을 고려하였다. 그레인의 연소로 인한 그레인의 체적 변화율 계산은 형상 함수(Form Function)를 적용하였으며, 총 8개의 다른 형태 그레인의 연소 효율을 도출하였다. 본 연구에서 제시한 이론모델의 적절성을 실험 결과인 압력-시간 선도와 비교하여 나타내었다. 그레인 형상과 추진제의 충진량에 따른 연소효율을 도출하였다.

• Journal of Medicine and Life Science
• /
• 제19권2호
• /
• pp.39-45
• /
• 2022

This study was undertaken to assess the potential of body mass index (BMI) as a risk factor for massive hemorrhage (MH) after cesarean section (CS) in patients with placenta previa. We retrospectively reviewed the medical records of patients who underwent CS for placenta previa between January 2010 and December 2018. MH was defined as an estimated blood loss ≥2,000 mL during surgery. Clinical characteristics, including BMI, were compared between the groups with and without MH. Subsequently, multivariable logistic regression analysis was conducted to identify the independent risk factors for MH. A total of 189 patients were included in this study. MH was observed in 28 patients (14.8%). According to the multivariable logistic regression analysis results, the risk factors independently associated with MH were BMI at delivery (adjusted odds ratio [aOR], 1.19; 95% confidence interval [CI], 1.04-1.35; P=0.012), placenta accrete (aOR, 24.55; 95% CI, 2.75-219.02; P=0.004), and total previa degree (aOR, 9.86; 95% CI, 2.71-35.96; P=0.001). The study findings showed that maternal obesity, namely a higher BMI at delivery, was an independent risk factor for MH after CS in patients with placenta previa. Close attention should be paid to the potential risk of hemorrhage associated with maternal obesity as well as the well-known risk factors of placenta accreta and total previa degree.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권2호
• /
• pp.34-38
• /
• 2013

AC Losses for face to face stacks of four identical coated conductors (CCs) were numerically calculated using the H-formulation combined with the E-J power law and the Kim model. The motive sample was the face to face stack of four 2 mm-wide CC tapes with 2 ${\mu}m$ thick superconducting layer of which the critical current density, $J_c$, was $2.16{\times}10^6A/cm^2$ on IBAD-MgO template, which was suggested for the mitigation of ac loss as a round shaped wire by Korea Electrotechnology Research Institute. For the calculation the cross section of the stack was simply modeled as vertically aligned 4 rectangles of superconducting (SC) layers with $E=E_o(J(x,y,t)/J_c(B))^n$ in x-y plane where $E_o$ was $10^{-6}$ V/cm, $J_c$(B) was the field dependence of current density and n was 21. The field dependence of the critical current of the sample measured in four-probe method was employed for $J_c$(B) in the equation. The model was implemented in the finite element method program by commercial software. The ac loss properties for the stacks were compared with those of single 4 cm-wide SC layers with the same critical current density or the same critical current. The constraint for the simulation was imposed in two different ways that the total current of the stack obtained by integrating J(x,y,t) over the cross sections was the same as that of the applied transport current: one is that one fourth of the external current was enforced to flow through each SC. In this case, the ac loss values for the stacks were lower than those of single wide SC layer. This mitigation of the loss is attributed to the reduction of the normal component of the magnetic field near the SC layers due to the strong expulsion of the magnetic field by the enforced transport current. On the contrary, for the other case of no such enforcement, the ac loss values were greater than those of single 4cm-wide SC layer and. In this case, the phase difference of the current flowing through the inner and the outer SC layers of the stack was observed as the transport current was increased, which was a cause of the abrupt increase of ac loss for higher transport current.

• 대한전자공학회논문지TC
• /
• 제45권10호
• /
• pp.65-70
• /
• 2008

본 연구에서는 94 GHz 송수신 시스템에 응용이 가능한 평면형 회로 내의 전송 선로 방식의 하나인 CPW(Coplanar Waveguide)와 구형 도파관 간의 신호를 원활히 전달해주는 94 GHz CPW-구형 도파관 변환기를 설계하고 제작하였다. 제안된 변환기는 단일 면에 구현된 Fin-line 테이퍼와 Open 타입의 CPW-Slot-line 변환기 구조로 구성되어 있으며, 이는 MMIC의 플립칩 본딩을 위해 기존의 MMIC 기술을 이용하여 단단하고 구부러지지 않는 사파이어($Al_2O_3$)기판위에 구현되었다. Ansoft사의 HFSS 툴을 이용하여 최적화된 Single-section 변환기를 Back-to-back 구조의 지그로 제작하였고 Anritsu ME7808A Vector Network Analyzer 장비를 이용해 $85{\sim}105$ GHz를 대역에서 S-파라미터들을 측정하였다. 측정 결과, 3 mm 길이를 갖는 CPW의 삽입 손실을 고려하여 94 GHz에서 약 1.7 dB의 삽입 손실과 25 dB 이상의 반사손실을 확인 하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.41.1-41.6
• /
• 2016

Background: The goal of this study was to retrospectively evaluate the prognosis of minimal invasive horizontal ridge augmentation (MIHRA) technique using small incision and subperiosteal tunneling technique. Methods: This study targeted 25 partially edentulous patients (10 males and 15 females, mean age $48.8{\pm19.7years$) who needed bone graft for installation of the implants due to alveolar bone deficiency. The patients took the radiographic exam, panoramic and periapical view at first visit, and had implant fixture installation surgery. All patients received immediate or delayed implant surgery with bone graft using U-shaped incision and tunneling technique. After an average of 2.8 months, the prosthesis was connected and functioned. The clinical prognosis was recorded by observation of the peri-implant tissue at every visit. A year after restoration, the crestal bone loss around the implant was measured by taking the follow-up radiographs. One patient took 3D-CT before bone graft, after bone graft, and 2 years after restoration to compare and analyze change of alveolar bone width. Results: This study included 25 patients and 39 implants. Thirty eight implants (97.4 %) survived. As for postoperative complications, five patients showed minor infection symptoms, like swelling and tenderness after bone graft. The other one had buccal fenestration, and secondary bone graft was done by the same technique. No complications related with bone graft were found except in these patients. The mean crestal bone loss around the implants was 0.03 mm 1 year after restoration, and this was an adequate clinical prognosis. A patient took 3D-CT after bone graft, and the width of alveolar bone increased 4.32 mm added to 4.6 mm of former alveolar bone width. Two years after bone graft, the width of alveolar bone was 8.13 mm, and this suggested that the resorption rate of bone graft material was 18.29 % during 2 years. Conclusions: The bone graft material retained within a pouch formed using U-shaped incision and tunneling technique resulted with a few complications, and the prognosis of the implants placed above the alveolar bone was adequate.

• 치위생과학회지
• /
• 제17권2호
• /
• pp.116-122
• /
• 2017

본 연구는 QLF-D를 이용하여 와동 내벽에 형성된 초기 이차우식증을 탐지가 가능한지 평가해보고, 표면에서 관찰한 우식병소와 실제 와동 내벽에 발생한 병소 간에 차이가 있는지 확인해보고자 시행하였으며, 다음과 같은 결과를 얻었다. 시간의 흐름에 따라 시편의 표면에서 관찰되는 이차우식병소가 점점 진행되었다. 수복물 변연의 우식병소 부분이 수복물에 가려지거나 형광에 의해 우식부분을 육안으로 판단하기에 어려운 부분들이 보였으며, 수복물이 있는 경우의 ${\Delta}F$값은 $-14.20{\pm}3.24$, 와동만 있는 경우의 ${\Delta}F$값은 $-11.56{\pm}3.94$ 로 수복물이 있는 경우의 ${\Delta}F$값이 유의하게 높게 나타났다(p<0.001). 또한 수복한 표면에서 측정한 병소의 ${\Delta}F$값은 $-14.20{\pm}3.24$, 횡단면에서 측정한 병소의 ${\Delta}F$값은 $-18.64{\pm}3.75$로 횡단면보다 표면에서 측정한 병소의 ${\Delta}F$값이 약 1.31배 가량 유의하게 크게 나타났으며, correlation은 0.026으로 낮게 나타났다(p<0.001). 하지만 수복하지 않은 표면과 횡단면의 ${\Delta}F$값 간의 correlation값은 0.613으로 높게 나타났다. 이를 통해 QLF-D를 이용하여 표면에서도 이차우식병소의 탐지가 가능하다는 것을 알 수 있었다. 다만, 수복물에 의한 간섭이 있을 수 있고, 병소의 특성상 실제 병소의 심도보다 적게 측정될 수 있으므로 이에 대한 고려를 통한 탐지가 이루어져야 할 것이다.