• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.225-230
• /
• 1995

Concrete structures need repair and rehabilitation due to functional deficiencies such as cracks, scaling and spalling. Loss of section such as spalling is caused by corrosion of reinforcing bar, fire, temperature change, poor design and etc. This study aims to examine the characteristics of polymer(epoxy)and polymer-cement(latex) for repair materials and to provide the proper repair scheme through static and fatigue tests. Totally 12 beams were tested. Results from static and fatigue tests of beams repaired with polymer and polymer-cement were compared.

• 전기의세계
• /
• v.30 no.9
• /
• pp.582-588
• /
• 1981

The laser parameters such as a population inversion density, a stimulated emission cross section and loss factor in the glass laser amplifier medium were experimentally determined in order to analyse the properties of laser amplification. Using these parameters, the rate equations were approximately solved and the properties of laser amplification were analysed. An experiment of two-stage amplifier of Q-switching laser pulse was performed and the maximum output power was 1.1 GW, 33J. The several problems such as a laser solarization and a laser coupling in laser amplification were resolved.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.148.2-148.2
• /
• 2011

Many symbiotic stars exhibit features formed through Raman scattering with hydrogent atom, which can be useful in probing the mass loss and mass transfer processes. These include Raman scattered O VI 6830, 7088, Raman scattered He II 6545, 4850, 4332, and broad wings around Balmer emission lines. In this study we investigate the basic properties of broad Balmer wings formed through Raman scattering using a Monte Carlo technique. Special attention is made on the symmetry of the wings which is expected to be broken due to asymmetric scattering cross section. In this poster, we show preliminary results.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.207-213
• /
• 1996

This paper proposes a new nonparametric test for testing the null hypothesis that the MRL is constant against the alternative hypothesis that the MRL is decreasing (increasing) for ramdomly censored data. The proposed test statistic is a L-statistic, and we use L-statistic theory to establish its asymptotic normality of the test statistic. We discuss the efficiency loss due to censoring and also calculate the asymptotic relative efficiencies of our test statistic with respect to the Chen, Hollander and Langberg's test for several alternatives.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.76-80
• /
• 2003

A contractible heat pipe is designed and tested to improve cooling performance of conduction cooled superconducting magnet. When the heat pipe temperature drops below the triple point temperature, heat pipe working fluid freezes to create low pressure. From this moment the heat pipe does net work any more (OFF state) and it just works as a heat leak path when the temperature of the first stage is higher than that of the second stage. Considering small cooling capacity of the second stage around 4.2 K, the conduction loss is not negligible. Therefore, the contractible heat pipe, made of a metal bellows and copper tubes, was considered to eliminate the conduction loss. Nitrogen and argon are as working fluid of heat pipe. The copper block is cooled down with these heat pipe and the cooling performance for each heat pipe is compared. At off state, the bellows is contracted due to the low pressure of heat pipe and the evaporator section of the heat pipe is detached about 3 mm from the second stage cold head of the cryocooler. In this way, we tan eliminate the conduction loss through the heat pipe wall.

• Journal of the Korean Society of Combustion
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2005

Incomplete combustion due to quenching in a narrow confinement has been a major problem for realization of a reliable micro combustion device. In most micro combustors, effects of flows are absent in the quenching because the flow is laminar and no severe stretch is present. In such circumstance, quenching is caused either by heat loss or by removal of active radicals to the wall surface of the confinement. An experimental investigation was carried out to investigate the relative significance of these two causes of quenching of a premixed flame. A premixed jet burner with a rectangular cross section at the exit was built. At the burner exit, the flame stands between two walls with adjustable distance. The gap between the two walls at which quenching occurs was measured at different wall surface conditions. The results were analyzed to estimate the relative significance of heat loss to the wall and the removal of radicals at the surface. The measurements indicated that the quenching distance was independent of the wall surface characteristics such as oxygen vacancy, grain boundary, or impurities at low temperature. At high temperature, however, the surface characteristics strongly affect the quenching distance, implying that radical removal at the wall plays a significant role in the quenching process.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.195-201
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, several kinds of combined wire screen meshes were used. The results are summarized as follows; The packed meshes with high mesh no. in the side of heater part of regenerator showed effective than the packed meshes with low mesh no. in the side of cooler part of regenerator. The temperature difference and pressure drop of the regenerator were not made by the specific surface area of wire screen meshes but by the minimum free-flow area to the total frontal area. Among the No. 150 single screen meshes, 200-60 combined meshes, the 200-150-100 combined meshes showed the highest in effectiveness.

• Journal of Korean Public Health Nursing
• /
• v.25 no.2
• /
• pp.197-208
• /
• 2011

Background: This study investigated the hearing status in Korean adults according to data from the Korea National Health and Nutrition Examination Survey 2009. Methods: The data of 3,479 adults(${\geq}20$ years, 1,492 men, 1,987 women) collected by the Korean Center for Disease Control was analyzed using ${\chi}^2$-test and logistic regression. Results: Differences in hearing loss according to individual factors were evident by follows gender, region, education status, economic status, current smoking and recognition of stress. Differences in - hearing loss according to ear related factors were evident subjective hearing status, experience of tinnitus, prevalence of chronic otitis media, and tympanomembrane abnormality. Conclusion: Hearing-related disorders can cause many social problems. This study investigated a representative cross-section of Koreans to determine the hearing status. The study was limited in that the risk factors of hearing loss were not identified. It is also recommended that a program be developed that can help control the variables identified in this study along with follow-up studies to verify the model.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.1
• /
• pp.28-36
• /
• 1995

In this paper, a design method of multiple n-way low loss power divider for x-band is propossed. To decrease loss, only two-stages of transmission lines are used with isolation resistors for match. Ex- perimental results for 3-way and 4-way power dividers have the divided power of 5.54~6.17dB and 6.76~7.37 dB, the return loss of more than 17dB and 12dB, and the isolation of more than 18dB and 10dB at center frequency, respectively, The measured results show good agreement with the theoretical analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.676-681
• /
• 2001

We usually divide the noise of exhaust system into pulsation noise and flow noise. Pulsation noise is the shock wave to occur when the burning gas of low pressure emits and include harmonic having basic frequency as the exhaust cycle of engine. Flow noise is the noise that is produced when gas flow emits into the atmosphere through the pipe and has the character of frequency like pink noise which has the high level of high frequency component. A muffler is divided into reflective type and absorptive type. We usually use the muffler compounding the property of them. In this study, it is the case of transfer matrix method that a muffler is compounded to analyze the elements of each section according to sound wave's proceed direction. But we use simple model. So, we use finite element method that takes short time to analyze. Acoustic analysis gives us transfer matrix to use FEA of SYSNOISE and we use STAR-CD for fluid analysis. We made database that is based on analytical results about the muffler of expansion type, extended type, offset type, reverse type, and perforated type and developed the muffler design system to perform work efficiently.