• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.710-714
• /
• 2011

In present work, $La_{0.8}Ca_{0.2}CrO_{3}$(LCC), $La_{0.8}Sr_{0.2}CrO_{3}$(LSC) and $La_{0.8}Ca_{0.2}CrO_{0.9}Co_{0.1}O_{3}$(LCCC) ceramic interconnect layer for SOFC were prepared by using thermal plasma spray coating process. The LCC, LSC and LCCC powders were characterized by x-ray diffraction(XRD), scanning electron microscopy(SEM), particle counter and BET analysis. In addition, basic and essential properties such as the surface morphology, cross section, gas leak rate, and electrical conductivity of LCC, LSC, and LCCC layers coated by thermal plasma spray coating process were analyzed and discussed. Based on these experimental results, it can be concluded that the LCCC layer coated by thermal plasma spray coating process can be suitable as a ceramic interconnect of SOFC.

• The Korean Journal of Community Living Science
• /
• v.28 no.4
• /
• pp.525-535
• /
• 2017

The purpose of this study was to compare the of ash and minerals contents in different types of soybeans (Baektae, Seoritae, Heuk Tae and Seomoktae) with different cooking methods. Raw, boiled and pan-fried soybean samples were prepared by the Rural Development Administration. Samples were digested by using a microwave and analyzed using ICP-OES and ICP-MS for determining the ash and minerals contents. Ash content in four raw soybeans ranged from 5.07 to 5.59 g/100g. There was no significant difference in the ash contents in raw and pan-fried soybeans (p>0.05). However, the ash content of boiled soybeans was 9 to 14% lower than that of raw soybeans (p<0.05). The minerals contents of Baektae and Seomoktae were high and the major minerals of various soybeans were K, P, Mg, and Ca, which accounted for ash 60.80-65.61%, 20.73-24.26%, 6.90-8.46% and 5.79-8.60%, respectively. The mineral contents of soybeans were significantly different depending on the type of cultivar (p<0.05), but the tendency was not constant. Because the process of soaking and boiling of soybeans made the soluble minerals elute, the ash and mineral contents were reduced. And process of pan-frying of soybeans make Because process of soaking and boiling of soybeans make soluble minerals elute (Ed- this section is very confused and seems to have 2 sentences combined: please check your intended meaning), the ash and mineral contents were reduced. As the soybeans are cooked by pan-frying, the water in the soybeans is evaporated and the mineral content is concentrated or kept constant. These results can serve as the basic data of mineral content during processing and cooking of soybeans.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.2
• /
• pp.171-183
• /
• 2020

The purpose of this study is to analyze in advance the problems and improvements that may occur during the construction of intermediate slabs and the loading of intermediate slabs through the preliminary structural safety evaluation of intermediate slabs for Test bed structures in deep depth tunnels. The Test bed construction can verify and confirm the results of the design and construction technology development of large depth double deck tunnel through the process, and can also be used as a learning site for engineers and the general public to speed up the time of underground space development. There will be an opportunity to do this. In particular, the design load of middle slab built inside the circular deep-depth double-sided tunnel cross-section varies depending on the construction method and the construction equipment load used. Class 3 truck load of KL-510 assumed to be common load to upper and middle slab during loading and installation is loaded on upper and lower slab with different working position for each load combination Analyzed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.8 no.1
• /
• pp.67-94
• /
• 1971

Korean fisheries industry holds 57,255 boats amounting to 269,079 tons in gross as of the end of 1967. The boats of the size under 30G.T., about sixty-two per cent of the total in tonnage, are utilized in coastal and their contribution to the total production of Korean fisheries industry is estimated at over seventy-five percent. Hull forms and construction method of them are partly in transition stage to the western tradition from the oriental tradition, which employs the chine-type straight-framed section, and tick and wide wooden planking fastened on naturally bent timber frames. And only about a half of them are mechanized. About fifty-seven per cent, 7,525 boats amounting to 91,751 gross tons, of the coastal and inshore fishing boats are those of the size ranging 5G.T. to 30G.T., which are engaged mostly in draft-and gill-netting, angling, longlining, anchovy seining, squid fishing and set-netting. The important fishing boats forming main structure of the inshore fishing fleets can be classified as 5G.T.-class multi-purpose boats, 10G.T.-class angling/longlining boats and 20G.T.-class drift-/gill-netters mostly utilized in the east-sea, 15G.T.-class anchovy seiner in the south-sea-sea, 20G.T.- and 28G.T.-class stow-netters in the west sea. Each of the three sea regions, east, south, and west, of Korean water has distinctly different characters from one another in topography, geology and sea aspects, and consequently in marine resources, fishing grounds and fishing tactics desired. Hence, the finishing boats in each sea region have also their own characters in hull form, structural features, deck design and equipments. In this report, analyzing the characteristics of the existing inshore fishing boats ranging 5G.T. to 30G.T. in size from view points of naval architecture and engineering, the author made an integrated investigation of their characteristics, covering size and principal dimensions, hull form, deck design, structural features and mechanization, in close connection with the natural circumstances of Korean water and local techno-socio-economic problems, and, finally, made some suggestions for the rational improvement or modernization of the inshore fishing boats. Further details of the characteristics of Korean inshore finishing boats are referred to the drawings of them compiled by the author and given in the reference[23] listed at the end of this report.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.576-587
• /
• 2012

As being actual physiognomical vegetation on Daegwang sand dune in Imjado, the widest area is occupied by Pinus thunbergii community planted as windbreak forest whereas those communities such as Robinia pseudoacacia community, Elymus mollis community, Imperata cylindrica var. koenigii - Elymus mollis community, Carex kobomugi community, Ischaemum antephoroides community, Imperata cylindrica var. koenigii community, Phragmites communis community, Imperata cylindrica var. koenigii - Calamagrostis epigeios community occupy as band shape or patch. According to the result of the data collected and analyzed based on phytosociological method regarding 74 plots of survey area, the species composition of Daegwang sand dune vegetation is classified total 10 vegetation units comprises 7 communities and 5 groups. The 7 communities are classified into Pinus thunbergii community, Robinia pseudoacacia community, Rosa rugosa var. rugosa community, Ischaemum antephoroides community, Carex kobomugi community, Calamagrostis epigeios community, and the sub-units of Pinus thunbergii communities are classified into 3 groups of Pteridium aquilinum var. latiusculum group, Elymus mollis group, Pinus thunbergii topical group and the sub-units of Calamagrostis epigeios communities are classified into 2 groups of Phragmites communis group, Calamagrostis epigeios tipical group. The zonation of vegetation from coastal line indicated with the order of Elymus mollis - Carex kobomugi, Carex pumila, Lathyrus japonicus - Calystegia soldanella - Vitex rotundifolia, Lathyrus japonicus, Ischaemum antephoroides - Rosa rugosa var. rugosa. According to the analysis result of longitudinal section, it was found to be those types with wide width herbaceous vegetation of foredune, smooth slope of foredune, lots of dune ridges with no structure were less vulnerable to erosion of sand dune and advantageous to its recovery.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.169-175
• /
• 2009

According as standard of measurement is changed to world geodetic system by surveying law revision, we need to transform previous 1/1,000 digital maps as a standards of world geodetic system. And, we should acquire standard strategy to minimize confusion and error by conversion of geodetic surveying standards. Thus, conversion of digital maps must be transformed efficiently and consistently according to notice of relevant standard. As common point, we have used 1/1,000 digital map and local geodetic system coordinates and world geodetic system coordinates that had been used in UIS business of Pusan city and, make a analysis of distortion quantity using KASM Trans Ver 2.2. As the result of distortion quantity calculation about all Pusan city, numbers of area that error is over 0.05m are 35 in case of X(N) and 43 in case of Y(E). Because some business section have especially much error, we divided into 3 areas, that was A,B,C, and analyzed. As a result of analysis, errors of more than 0.05m are occurred only 1 X(E) in the B area and 1 X(N) and 1 Y(E) in the C area. In conclusion, We think It is a good method that we consider a distortion quantity and divide a region, and transfer to world geodetic system for large area like Pusan city.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.2 s.40
• /
• pp.135-149
• /
• 2006

This study analyzed the unit of child rearing in four Household textbooks approved by the Department of Education during the 1920s-30s. These Household textbooks is contained a unit related to child rearing among Household textbooks approved by the Department of Education at that time. The results of the analysis are summarized as follows. First, the structure of the child rearing unit in the Household textbooks were largely composed of 'part, chapter and section' and this structure and contents were similar among all the textbooks. Second. in general, the four textbooks spared a large space for 'childcare,' nursing' and 'new-born babies and infants,' suggesting the importance of these contents. Third, cautions for pregnant women were taught to call attention not only of pregnant women but also of their families to importance of pregnancy. Fourth, the child rearing unit contained many illustrations and pictures and some pictures were shared among the textbooks. Firth, in acquiring medical knowledge related to diseases, the textbooks demanded child-rearing mothers to 'observe' and 'scrutinize' any symptoms appearing in the child. These contents were connected with commercial products but far distant from the realities. The detailed method of 'nursing' also required a lot of time and accuracy impractical in real life.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.111-122
• /
• 1996

The effects of external restraint on the thermal stresses i n mass concrete are investigated through a series of parametric study. Two major factors affecting the degree of external restraint such as the ratio of length to height of the placed structure (L/H) and the elastic modulus of base structure ($E_r$) are employed as the parameters in a condition which a placing height H is 1.0m. Various conditions of I,/H and E, are analysed by a FEM program and the relationship between these two parameters is examined. The shape of stress distribution due to the external restraint is shown as linearity on the height direction of the section, and is influenced by L/H, $E_r$, and strength development of placed concrete. The external restraint can be devided by two part. One is an axial restraint and the other is a flexural restraint. When the level of external restraint is low, the structure behavior is mainly governed by flexural restraint, otherwise it is dependent on axial restraint. Comparing the calculated stress by the method of the ACI 207 committee with a finite element analysis, the fbrmer overestimates the external restraint stress when the degree of external restraint is weak, and underestimates when it is strong.

• Journal of the Korean Home Economics Association
• /
• v.20 no.4
• /
• pp.155-168
• /
• 1982

What is attempted here is to find out an optimum method for the design of physical environments that could save human energy expenditures and safely perform household duties. There are, if any, very little amount of research done in this area. This is particulary so when the work relates to the designing of household storage facilities in the light of the energy metabolism of human body. The first step to this study, therefore, is to find out the ways by which we can determine the energy metabolism of human body accurately. To measure the volume and the concentration of human respiration continuously and automatically, a new apparatus is selected here. This includes the recording system with the Wright Respirometer and the Expired Gas Analyzer as well as the computer system to multiply volume by concentration of human respiration and to integrate them for a given time. Then, the author experimented on the reliability of this apparatus and came to the conclusion that this apparatus satisfied our need to research the energy metabolism of human body. Next, the general plan and procedures to experiment with this apparatus have been determined as follows: 1) subjects are three young and sound females. Their physical characteristics are shown in Table 1 and most approximates the standard characteristics of Japanese females, 2) height of open shelves is selected in such away as to correspond to the respective height of each subject(see Table 2), 3) utensils to be stored are box shaped object, which weight is 0.5kg, 1.0kg, 2.0kg or 3.0kg, 4) working motions are given while one or two hands as to place utensil on each shelf from the standard working board, 85 cm in height and then to place back it on the board from the shelf and repeated in constant velocity as 10 times per a minute, 5) each posture of motion is chosen by each subject in free, 6) procedures of measurement of human energy metabolism ard shown at(6), 1, Section 3 as specific methods for using this apparatus. Findings of this study are as follows: 1. Human energy expenditures for storing utensils on shelves by each subject are shown in quantity more accurately than in any other studies, under varying conditions about height of shelves, load of utensils and working motion with one hand and two hands (see Fig. 8~13 and Table 3). 2. Experimental formulae of human energy expenditure for that work are shown as formula (8), (9) and (10), to generalize results of 1. and to apply those for working motion under given conditions. 3. As results of analysis on gained data, we are able to show the standard model of human energy expenditures for storing untensils on shelves by the standard Japanese female (see Table 7 and Fig. 14).

• Journal of Society of Preventive Korean Medicine
• /
• v.18 no.1
• /
• pp.11-21
• /
• 2014

Objective : This study set out to combine the treatment efficacy of Taraxacum with Dongchimi fermentation and investigate Taraxacum's effects on protection of liver cell and controlling nitric oxide(NO) through experiments, thus checking whether it had values as a physiological active matter. The experimental materials include Taraxacum Dongchimi (TD) and Taraxacum fermented by Dongchimi (TDF). As for methodology, experiments were carried out to compare TD and TDF in components, protection effects for liver cells, anticancer effects on liver cells, and protection effects for brain cells in the aspects of liver function and immunity enhancement. Method : The experimental materials include Taraxacum Dongchimi (TD) and Taraxacum fermented by Dongchimi (TDF). As for methodology, experiments were carried out to compare TD and TDF in components, protection effects for liver cells, anti-cancer effects on liver cells, and protection effects for brain cells in the aspects of liver function and immunity enhancement. Results : As shown in the chromatogram results, each valid component content increased in Taraxacum fermented by Dongchimi (TDF) for each time section. Of them, the valid component content at 36.80 minutes was approximately 2.7 times higher in TDF at 21.8% than in Taraxacum Dongchimi (TD) at 8.28%. TDF generated more excellent protection effects against the toxicity that caused oxidative damage to the liver cell(HepG2) with t-BHP than TD. The survival rate was low in TD of $100{\mu}g/m{\ell}$ and $300{\mu}g/m{\ell}$ and increased to 23.3% in TDF of $100{\mu}g/m{\ell}$. The survival rate was the highest at $300{\mu}M$ with a significant difference of 68.1%(P<0.05). Both TD and TDF showed effects of controlling nitric oxide production according to concentration with TDF recording a higher rate of controlling nitric oxide production than TD. There were significant differences(P<0.05) in the effects of controlling nitric oxide production at 200 ug/ml, 400 ug/ml in both groups. Especially the result TDF of $400{\mu}g/m{\ell}$ was thus similar to those of butein, the positive control group. Conclusion : The result of this studies is that Taraxacum fermented by Dongchimi (TDF) increased the valid component content compared with the simple mixture(TD). The findings clearly show that it is a material with the effects of improving immunity and liver cell protection. If fermentation methods are further developed to use it as a functional material, it will be subject to more opportunities of being used in other functional foods and make a contribution to integrated medicinal food development.