• Journal of Microbiology and Biotechnology
• /
• 제21권2호
• /
• pp.136-146
• /
• 2011

This study provides first-hand proteomic data on the survival strategy of Anabaena sp. PCC 7120 when subjected to long-term iron-starvation conditions. 2D-gel electrophoresis followed by MALDI-TOF/MS analysis of iron-deficient Anabaena revealed significant and reproducible alterations in ten proteins, of which six are associated with photosynthesis and respiration, three with the antioxidative defense system, and the last, hypothetical protein all1861, conceivably connected with iron homeostasis. Iron-starved Anabaena registered a reduction in growth, photosynthetic pigments, PSI, PSII, whole-chain electron transport, carbon and nitrogen fixation, and ATP and NADPH content. The kinetics of hypothetical protein all1861 expression, with no change in expression until day 3, maximum expression on the $7^{th}$ day, and a decline in expression from the $15^{th}$ day onward, coupled with in silico analysis, suggested its role in iron sequestration and homeostasis. Interestingly, the up-regulated FBP-aldolase, Mn/Fe-SOD, and all1861 all appear to assist the survival of Anabeana subjected to iron-starvation conditions. Furthermore, the $N_2$-fixation capabilities of the iron-starved Anabaena encourage us to recommend its application as a biofertilizer, particularly in iron-limited paddy soils.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.49-51
• /
• 1986

제왕절개술 환자 10인에게 Succinylcholine Chloride 및 atracurium을 준 결과 다음과 같은 결론을 얻었다. 1. Succinyline chloride 1mg/kg와 atracurium 0.4mg/kg를 주어 충분한 근육이완을 유지하였다. 2. 혈압과 맥박은 atracurium주사 후 의의있는 변화는 없었다. 3. 태아의 Apgar score는 1분과 5부때 8~10점으로 모두 양호한 상태였다.

• 제어로봇시스템학회논문지
• /
• 제17권8호
• /
• pp.833-842
• /
• 2011

The objectives of this research are development of guidance, navigation and control system for RUAV on virtual instrumentation and real flight test. For this research, the system is divided to DAQ (data acquisition) section, actuator section and controller section. And the hardware and software on each sections are realized on LabVIEW base. Waypoint guidance and control of auto flight are realized using PID gain tuning and waypoint vector tracking guidance algorism. For safe flight test, auto/manual switching module isolated from FCS (Flight Control System) is developed. By using the switch module, swift mode change was achieved during emergency flight case. Consequently, a meter level error of flight performance is achieved.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.55-65
• /
• 2005

Most patients with temporomandibular disorder can be treated conservatively. However, open TMJ surgery can be needed in some patients. We analysed the patients with TMD which open surgery has performed since 1998. Open surgery was carried out in 8 patients. Age ranged from 22 to 61 years, with a mean of 42.8years. All patients were male. Final diagnosis was obtained based upon clinical, radiographic and operative finding as follows; habitual luxation, bony ankylosis, traumatic arthritis, disc displacement with destructive change, disc displacement and adhesion. Etiologic factors included trauma(4), infection(2), and unknown(2). Open surgery included arthroplasty with either of condylectomy, eminectomy, meniscoplasty, capsurrohaphy. All patients were recovered uneventfully without severe complications. Some mouth opening limitation and mouth opening deviation remained. Postoperative aggressive physical therapy and careful follow up were performed. In conclusion, open TMJ surgery must be considered in organic disease such as ankylosis, tumor and TMD without favorable recovery after long-term conservative therapy.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.56-63
• /
• 1998

The purpose of this is to analyze experimentally how the change of cutting speed have effects on hole over size of cutting hole, surface roughness of workpiece and roundness during the deep hole machining of SM55C with solid BTA drill using BTA drilling system. Conclusion reached is as follows. (1) The diameter was expanded for 25$\mu$m at the first section and then was reduced 0$\mu$m and 15$\mu$m respectively at the 10m and 20m section comparing to the diameter of tool with respect to the variation of cutting length at 70m/min of cutting speed. 0.15mm/rev of feed. (2) It was proved that roughness was below 8.67$\mu$m for the whole section of cutting length. (3) The roundness has been below 12$\mu$m. Regarding the polygon phenomenon, it has been proved that not only uneven best at 70m/min of cutting speed. 0.15mm/rev of feed.

• International journal of advanced smart convergence
• /
• 제2권1호
• /
• pp.1-5
• /
• 2013

This study proposes a remote monitoring of patients and emergency notification system with a camera and pulse wave sensor for U-Healthcare. The proposed system is a server client model based U-Healthcare system which consists of wireless clients that have micro-controller, embedded-board for patient status monitoring and a remote management server. The remote management server observes the change of pulse wave data individually in real-time sent from the clients that is to be remote-monitored based on the pulse wave data stored by users and divides them into caution section and emergency section. When the pulse wave data of a user enters an emergency situation, the administrator can make a decision based on the real-time image information and pulse rate variability. When the status of the monitored patient enters the emergency section, the proposed U-healthcare system notifies the administrator and relevant institutions. An experiment was conducted to demonstrate the pulse wave recognition of the proposed system.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.105-114
• /
• 2009

A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.514-517
• /
• 2008

An hydraulic experiment was carried out in an open channel flume in order to investigate the water discharge capability of the sluice caisson for tidal power generation, which greatly affects the economical efficiency of the construction of a tidal power plant. To predict the influence of change in the major design parameters relating to the sluice shape on the water discharge capability of the sluice, the experiment was carried out very precisely. The experiment was carried out for the six different sluice models of different widths and bottom heights of the sluice throat section. The experimental data showed that the water discharge generally increased by increasing the width of the throat section if the side shape of the sluice was the same. In addition, the coefficient of discharge was larger when the bottom height of the throat section was higher for the two bottom heights that were tested.

• 대한공간정보학회지
• /
• 제25권2호
• /
• pp.49-56
• /
• 2017

본 연구에서는 이상기후 및 기후변화에 따른 태풍, 집중호우 등으로 발생할 수 있는 피해들을 대비하고 상황에 맞는 대응을 위한 침수분석을 하였다. 연구대상지역은 낙동강의 지류인 남강유역에 대하여 국 내외 홍수위험지도 작성에 널리 이용되고 있는 FLUMEN 모형을 적용한 하도 및 제내지의 2차원 침수해석을 실시하였다. ArcView에 의해 지형을 $5m{\times}5m$의 수치표고모형을 생성하여 하천의 수리 수문특성 분석 및 침수지역 식별의 정확성을 최대한 확보할 수 있도록 하였다. 침수 모의 결과 1구역에 163.3 ha, 2구역에 227.7ha 그리고 3구역은 59.9 ha의 침수가 발생한 것으로 모의되었다.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.224-233
• /
• 2002

General massage and sports massage techniques are kneading, petrisage and tappotment. These will be improve physiological reaction. Connective tissue massage is a reflex zone massage in the subcutaneous tissues. These are superficial and deeper fascia, intermuscular septa, blood vessel, perinerve tissue. It is frame work on organs in human-being, Therefore, abnormality of there tissues are a pathologic change of the organs. The pathologic changes are fined with visible investigation, manual investigation and stroking investigation on the reflex zone. The stroking on the reflex zone is the treatment also. Stroking methods are depend upon tissues and area. Short strokings are directed at approximately right angles against bone, muscular or facial board. Long strokings are very often follow the original cleavage lines. The back is divided for treatment purposes into sections. There are basic section, thoracic section and cervical section.