• 한국분무공학회지
• /
• 제21권4호
• /
• pp.214-222
• /
• 2016

Changes in road infrastructure affect driving patterns and pollutant emission characteristics. we analyzed the changes in driving patterns and pollutant emission characteristics of the driving route via measured driving patterns at year 2009 and 2016. Since 2009, there has been an increase in population and traffic demand, including residential areas and industrial facilities. Traffic conditions were improved such as the opening of the highway Inter-Change to Seoul and the construction of underground driveway. As a result, the average vehicle speed increased. More detail comparisons have made on the changes of the underground driveway section and the crossroad section, which are expected to have significant changes in the transportation infrastructure. The vehicle speed distribution of the underground driveway changed from low speed to high speed, and the increase of the time spent at the high speed and high load caused the increase of NOx emissions. The vehicle speed also increased at the crossroad section, and the consequence NOx and $CO_2$ emissions decreased. It is mainly because the decreased time spent at idle, which results from the proper traffic demand management at this area.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.97-103
• /
• 2009

A numerical study of the flow characteristics inside a U-type circular tube is carried out in this paper. The numerical simulations carried out by using a Navier-Stokes code which is commercially available. Before detailed numerical simulations, validation of present numerical approach is made by comparing numerical solutions with experimental data. Numerical simulations are performed to study the effect of curvature on the flow characteristics inside a U-type tube. Numerical solutions show that a significant effect on the secondary flow structure in the cross section of the tube, especially in the curved section is shown when the curvature ratio, ratio of curvature to tube diameter, is smaller than about 3.5. As the curvature ratio decreases below 3.5, a counter rotating vortex is found below the primary vortex in the cross section of the tube. Another dramatic change of the flow structure is the formation of streamwise separation zone when the curvature ratio is decreased below 1.25.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.589-598
• /
• 2004

Flow condensation heat transfer coefficients (HTCs) of R22 and R134a were measured on a horizontal 9 hole aluminum multi-channel tube. The main test section in the refrigerant loop was made of a flat multi-channel aluminum tube of 1.4 mm hydraulic diameter and 0.53 m length. Refrigerant was cooled by passing cold water through an annulus surrounding the test section. Data were obtained in the vapor qualities of 0.1∼0.9 at mass flux of 200∼400 kg/$m^2$s and heat flux of 7.3∼7.7 ㎾/$m^2$ at the saturation temperature of 4$0^{\circ}C$. All popular correlations in single-phase subcooled liquid and flow condensation originally developed for large single tubes predicted the present data of the flat tube within 20% deviation when effective heat transfer area is used in determining experimental data. This suggests that there is little change in flow characteristics and patterns when the tube diameter is reduced down to 1.4 mm diameter range. Thermal insulation for the outer tube section surrounding the test tube for the transport of heat transfer fluid is very important in fluid heat-ing or cooling type heat transfer experimental apparatus.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.251-262
• /
• 1999

쉴드터널에서 사용이 증가되고 있는 사다리꼴 세그먼트는 연결봉과 연결쐐기를 사용하여 세그먼트를 조립함으로서 터널라이닝을 형성하게 된다. 이 경우 사다리꼴 세그먼트의 테이퍼 각도를 크게 할수록 조립시공이 용이하고, 또한 지수재의 밀림현상을 줄일 수 있지만 반면 연결부의 구조적 안정성은 감소하게 된다. 본 논문에서는 단면형상이 불규칙한 세그먼트와 여러가지 부속재가 3차원적으로 연결되는 쉴드터널에 대해 현장의 시공과정을 모사하여 3차원 해석을 수행하였으며, 사다리꼴 세그먼트의 테이퍼 각도변화$(0^{\citc$\mid$,\; 10${\circ},\; 20^{\circ})$에 따른 연결부의 작용력을 구하여 연결부에 대한 마찰저항력 시험결과와 비교, 분석함으로서 연결부에 대한 개선방안을 모색하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.177-182
• /
• 1997

The purpose of this study is to analyze how tools, guide bush type and the change of cutting speed have effects on the diameter of cutting hole, surface roughness of workpiece and roundness during the deep hole machining of SM55C with solid BTA drill by using BTA drilling system through experiment. Conclusion reached is as follows. (1) The diameter was expanded for 25${\mu}{\textrm}{m}$ at the first section and then was reduced 0${\mu}{\textrm}{m}$ and 15${\mu}{\textrm}{m}$ respectively at the 10m and 20m section comparing to the diameter of tool with respect to the variation of cutting length. (2) It was proved that roughness was below 12S for the whole section of cutting length. (3) The roundness has been below 12${\mu}{\textrm}{m}$. Regarding the polygon phenomenon, it has bee proved that not only uneven number of angle but also even number (quadrilateral, elliptical) of angle were made. (4) Variation of diameter, surface roughness of workpiece and roundness turned out to ve the best at 70m/min of cutting speed, 0.15mm/rev of feed.

• 한국수학사학회지
• /
• 제22권1호
• /
• pp.111-124
• /
• 2009

본 연구에서는 2012학년도 대학수학능력시험의 출제체제 개편에 맞추어 현재 시행되고 있는 대학수학능력시험에서 나타나는 문제점과 그 개선 방안에 대하여 연구하였다. 대학수학능력시험은 1994년도 시행이후 제5차, 6차, 7차 교육과정을 거치면서 교육과정이 바뀜에 따라 몇 차례 개정을 하여 현행에 이르고 있다. 2007년 2월 발표된 수학과 교육과정 개정에 의해 2009년부터 개정된 교육과정에 따라 교육이 이루어지고 2012학년도의 대학수학능력시험은 그 출제 및 응시체제가 개편되어야 한다. 지난 교육과정과 2009학년도부터 시행하게 되는 개정교육과정에 따른 대학수학능력시험 출제체제의 변천과정을 조사하고 외국의 대학입시시험의 출제 범위를 우리의 교육과정과 비교하여 현행 대학수학능력시험에서 나타나는 문제점을 개선할 수 있는 방안을 제언한다.

• 소성∙가공
• /
• 제11권3호
• /
• pp.262-268
• /
• 2002

The bending process for the rectangular and circular curled tube can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon has been known to be occurred by the different of velocity at the die exit. The difference of velocity at the die exit section can be obtained by the different velocity of billets through the multi-hole container and by the cohesion of billet Inside the porthole die chamber. The bending phenomenon can be controlled by the two variables, the one of them is the difference of velocity at the die edit section by the different velocity of billets through the multi-hole container The other is the difference by the different hole diameter The results of the experiment show that the rectangular curved tube can be formed by the extrusion process, that the curvature of the curved product can be controlled by the velocity of punch and the diameter of container hole, that the defects such as the distortion of section and the thickness change of the wall of tube and the folding and wrinkling of thin tube did not happen after the extra-bending processing by the extrusion bending machine.

• 한국해양공학회지
• /
• 제23권6호
• /
• pp.77-81
• /
• 2009

The radar cross section (RCS) of a warship is one of the most important design features in terms of her survivability in hostile environments. Ocean waves continuously changes the attitude of an objective warship to hostile radar and distorts the RCS as a result. This paper presents a dynamic RCS analysis technique and procedure that considers temporal ship motion. First, data sets are prepared for ship motions in 6 degrees of freedom, which are numerically simulated for an objective warship via frequency to time domain conversion with response amplitude operators and specified ocean wave spectra. Second, a series of RCS analysis models are transformed geometrically by referring to ship motion data sets. Finally, temporal RCS analyses are carried out with the RCS simulation code, SYSCOS. As an example, RCS analysis results are given for a virtual warship, which show that ship motions temporally change RCS values and cause RCS reduction compared with static value in terms of mean values.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.97-99
• /
• 2007

This paper presents a fuzzy logical control method to implement an on-line optimum efficiency control for Permanent Magnet Synchronous Motor. This method real-timely adjusts the output voltage of the inverter system to achieve the optimum running efficiency of the whole system. At first, the input power is calculated during the steady state in the process of efficiency optimizing. To exactly estimate the steady state of the system, this section needs check up the speed setting on timely. The second section is to calculate input power of dc-bus. The exact measurement of the voltage and current is the vital point to acquire the input power. The third section is the fuzzy logic control unit, which is the key of the whole drive system. Based on the change of input power of dc-bus and output voltage, the variable of output voltage is gained by the fuzzy logical unit. With the on-line optimizing. the whole system call fulfill the minimum input power of dc-bus on the running state. The experimental result proves that the system applied the adjustable V/f control method and the efficiency-optimizing unit possesses optimum efficiency, and it is a better choice for simple variable speed applications such as fans and pump.

• 한국강구조학회 논문집
• /
• 제12권3호통권46호
• /
• pp.329-337
• /
• 2000

하중-저항계수 설계법(LFRD)에 따르면, 단면 형상은 압축 요소의 폭-두께비 및 브레이스 조건에 따라 조밀, 비조밀, slender로 나누어 설계가 되어지고 있다. 본 논문에서는 LRFD시방서의 내용을 기준으로 2경간 연속보의 주형인 I형 거더를 조밀단면과 비조밀단면으로 나누어 설계하였으며, 최적화 기법을 도입하여 단면을 설계하였다. 본 연구는 최적화 기법을 이용하여 조밀 및 비조밀 단면에서의 단면 형상의 변화를 고찰하였다.