• 제목/요약/키워드: Secondary link

검색결과 119건 처리시간 0.028초

Administration of antibiotics contributes to cholestasis in pediatric patients with intestinal failure via the alteration of FXR signaling

  • Xiao, Yongtao;Zhou, Kejun;Lu, Ying;Yan, Weihui;Cai, Wei;Wang, Ying
    • Experimental and Molecular Medicine
    • /
    • 제50권11호
    • /
    • pp.14.1-14.14
    • /
    • 2018
  • The link between antibiotic treatment and IF-associated liver disease (IFALD) is unclear. Here, we study the effect of antibiotic treatment on bile acid (BA) metabolism and investigate the involved mechanisms. The results showed that pediatric IF patients with cholestasis had a significantly lower abundance of BA-biotransforming bacteria than patients without cholestasis. In addition, the BA composition was altered in the serum, feces, and liver of pediatric IF patients with cholestasis, as reflected by the increased proportion of primary BAs. In the ileum, farnesoid X receptor (FXR) expression was reduced in patients with cholestasis. Correspondingly, the serum FGF19 levels decreased significantly in patients with cholestasis. In the liver, the expression of the rate-limiting enzyme in bile salt synthesis, cytochrome P450 7a1 (CYP7A1), increased noticeably in IF patients with cholestasis. In mice, we showed that oral antibiotics (gentamicin, GM or vancomycin, VCM) reduced colonic microbial diversity, with a decrease in both Gram-negative bacteria (GM affected Eubacterium and Bacteroides) and Gram-positive bacteria (VCM affected Clostridium, Bifidobacterium and Lactobacillus). Concomitantly, treatment with GM or VCM decreased secondary BAs in the colonic contents, with a simultaneous increase in primary BAs in plasma. Moreover, the changes in the colonic BA profile especially that of tauro-beta-muricholic acid ($T{\beta}MCA$), were predominantly associated with the inhibition of the FXR and further altered BA synthesis and transport. In conclusion, the administration of antibiotics significantly decreased the intestinal microbiota diversity and subsequently altered the BA composition. The alterations in BA composition contributed to cholestasis in IF patients by regulating FXR signaling.

Hydraulic fracturing experiments of highly deviated well with oriented perforation technique

  • Zhu, Hai Y.;Deng, Jin G.;Liu, Shu J.;Wen, Min;Peng, Cheng Y.;Li, Ji R.;Chen, Zi J.;Hu, Lian B.;Lin, Hai;Guang, Dong
    • Geomechanics and Engineering
    • /
    • 제6권2호
    • /
    • pp.153-172
    • /
    • 2014
  • In order to investigate the effect of different perforation angles (the angle between the perforation direction and the maximum horizontal principal stress) on the fracture initiation and propagation during hydraulic fracturing of highly deviated well in oil & gas saturated formation, laboratory experiments of the hydraulic fracturing had been carried out on the basis of non-dimensional similar criteria by using 400^3 $mm^3$ cement cubes. A plane fracture can be produced when the perforations are placed in the direction of the maximum horizontal principal stress. When the perforation angle is $45^{\circ}$, the fractures firstly initiate from the perforations at the upper side of the wellbore, and then turn to the maximum horizontal principal stress direction. When the well deviation angle and perforation angle are both between $45^{\circ}$ and $90^{\circ}$, the fractures hardly initiate from the perforations at the lower side of the wellbore. Well azimuth (the angle between the wellbore axis and the maximum horizontal principal stress) has a little influence on the fracture geometries; however it mainly increases the fracture roughness, fracture continuity and the number of secondary fractures, and also increases the fracture initiation and propagation pressure. Oriented perforating technology should be applied in highly deviated well to obtain a single plane fracture. If the well deviation angle is smaller, the fractures may link up.

AI 자동화 출입통제 시스템을 위한 비대면 발열 감지기 모듈 개발 및 교육 프로그램 연계 (Development of Non-Face-To-Face Heat Sensor Module for AI Automated Access Control System and Linkage with Education Program)

  • 이효재;김응석;홍창호
    • 실천공학교육논문지
    • /
    • 제13권2호
    • /
    • pp.301-304
    • /
    • 2021
  • 본 연구에서는 코로나-19시대에 개인인식 모듈과 발열감지 모듈이 상호연동을 통해서 동시에 두가지 기능을 수행할 수 있는 모듈을 개발하였다. 이는 기존 시스템에서 발생하는 개인인식 모듈의 호환 문제와 발열감지의 별도 시행에 따르는 정체 시 발생 가능한 2차 감염 문제를 동시에 해결할 수 있다. 따라서, 본 연구에서는 NFC, Bluetooth 메인보드를 개발하였고, 발열 감지를 위해서 array 방식의 비접촉 온도센서를 적용하였다. 개발된 시스템은 AI 자동화 출인통제가 필요한 공공기관이나 민간기업에서 유동인구의 출입관리와 효율적인 방역을 동시에 실현할 수 있을 것으로 기대된다. 또한 개발 시스템의 모듈을 이용한 임베디드 프로그래밍과 웹 프로그래밍 구현방법을 교육 프로그램으로의 연계도 가능할 것으로 판단된다.

예비 수학교사의 통계와 확률론에서의 몇 가지 오개념 (A Study on Pre-service Mathematics Teachers' some Misconceptions in the Statistics and Probability)

  • 김창일;전영주
    • 한국학교수학회논문집
    • /
    • 제21권4호
    • /
    • pp.469-483
    • /
    • 2018
  • 본 연구는 예비 수학교사들이 학교수학에서 확률과 통계 교수를 위해 어떠한 준비를 해야 하는지를 알아보고 교사교육 개선에 도움을 주고자 함이다. 이를 위해 예비 교사를 대상으로 확률과 통계학 교육과정의 설문과 평가를 실시하고 이들 간의 회귀분석과 상관관계를 조사하였다. 조사를 통해 난이도에 비해 평가 결과가 낮게 나타난 문항을 추출하고 이를 토대로 분석하였다. 그 결과 첫째, 확률과 통계에 대한 중등 학교수학과 대학수학의 내용체계를 연계하여 예비 수학교사들을 지도할 필요가 있다. 둘째, 예비 수학교사들의 확률과 통계 교과목 이해 정도의 정확한 진단이 필요하다. 셋째, 예비 수학교사들이 가진 오개념과 그 원인의 다양함을 알게 되었다. 그리고 이와 관련된 지속적인 후속 연구가 필요하다는 시사점을 도출하였다.

중등교사의 수업개선 노력이 교사 효능감에 미치는 영향: 학교풍토 유형 간 비교를 중심으로 (The Effects of Secondary School Teachers' Efforts on Instructional Improvement on Teacher Efficacy: Focused on Comparison among Types of School Climate)

  • 최원석;길혜지
    • 한국콘텐츠학회논문지
    • /
    • 제19권5호
    • /
    • pp.472-483
    • /
    • 2019
  • 본 연구의 목적은 중등교사의 수업개선 노력과 교사 효능감 간 관계를 수업변화 경험과 사기 열의, 학교 풍토가 어떻게 매개 조절하는지를 분석하는 것이다. 이를 위해, 2017년에 경기도의 197개 중학교 3학년 학생 표집과 교사를 대상으로 조사된 경기교육종단연구 6차년도 자료를 활용하여 중등교사의 수업변화 경험이 수업개선 노력과 교사 효능감 간 관계를 매개하는지를 검증하였다. 그리고 이러한 매개효과를 사기 열의라는 개인 수준의 변수가 조절하는지에 대해 조건부 간접효과 분석을 실시하였다. 이 때, 학교풍토 유형 간에 조절된 매개효과가 상이할 수 있다고 보고, 잠재프로파일 분석을 통해 학교 풍토를 보수적, 허용적, 혁신적 풍토로 유형화한 후, 각 유형별로 분석 결과를 비교하였다. 연구 결과, 수업개선 노력이 교사 효능감에 미치는 영향을 수업변화 경험이 매개하는 효과는 혁신풍토 학교에서만 나타났다. 다음으로 교사의 수업변화 경험이 교사효능감에 미치는 영향을 교사의 사기 열의가 조절하는 효과는 허용적 및 혁신적 풍토에서만 발견되었다. 끝으로 교사의 사기 열의에 의해 조절된 매개효과는 허용적 풍토에서보다 혁신적 풍토에서 더 크게 나타났다.

교차 계층 설계 기법을 사용한 새로운 AODV 라우팅 프로토콜 설계 및 성능평가 (Performance Evaluation of the new AODV Routing Protocol with Cross-Layer Design Approach)

  • 장재신;위성홍
    • 한국정보통신학회논문지
    • /
    • 제24권6호
    • /
    • pp.768-777
    • /
    • 2020
  • 본 논문에서는 이동 애드혹 네트워크에서 널리 사용되는 AODV 라우팅 프로토콜과 통신 노드의 이동성 때문에 발생하는 통신 경로 단절 등의 문제를 해결하기 위해 다중 경로설정을 지원하는 AODV 기법을 기반으로 개선된 다양한 연구 결과들을 분석한다. 그리고 AODV 기법이 사용하는 홉 기반 라우팅 기법의 문제점을 분석하고, 이를 개선하기 위해 홉 수를 주 메트릭으로 사용하면서 보조 메트릭으로 경로 지연시간의 합을 사용하는 새로운 C-AODV 라우팅 프로토콜을 설계하고, NS-3 네트워크 시뮬레이터에 구현하여 성능평가를 수행한다. 컴퓨터 시뮬레이션 성능평가 결과를 토대로 C-AODV 기법이 기존 AODV 기법과 비교하여 성능이 어느 정도 개선되는지 비교 분석하고 앞으로 개선할 사항 등을 제시한다.

HMIPv6 네트워크에서 Robust 한 Inter-MAP 바인딩 업데이트 기법 (Robust Inter-MAP Binding Update Scheme in HMIPv6)

  • 박진욱;정종필;추현승
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2008년도 추계학술발표대회
    • /
    • pp.1387-1390
    • /
    • 2008
  • In a wireless network, handover latency is very important in supporting user mobility with the required quality of service (QoS). In view of this many schemes have been developed which aim to reduce the handover latency. The Hierarchical Mobile IPv6 (HMIPv6) approach is one such scheme which reduces the high handover latency that arises when mobile nodes perform frequent handover in Mobile IPv6 wireless networks. Although HMIPv6 reduces handoff latency, failures in the mobility anchor point (MAP) results in severe disruption or total disconnection that can seriously affect user satisfaction in ongoing sessions between the mobile and its correspondent nodes. HMIPv6 can avoid this situation by using more than one mobility anchor point for each link. In [3], an improved Robust Hierarchical Mobile IPv6 (RH-MIPv6) scheme is presented which enhances the HMIPv6 method by providing a fault-tolerant mobile service using two different MAPs (Primary and Secondary). It has been shown that the RH-MIPv6 scheme can achieve approximately 60% faster recovery times compared with the standard HMIPv6 approach. However, if mobile nodes perform frequent handover in RH-MIPv6, these changes incur a high communication overhead which is configured by two local binding update units (LBUs) as to two MAPs. To reduce this communication overhead, a new cost-reduced binding update scheme is proposed here, which reduces the communication overhead compared to previous schemes, by using an increased number of MAP switches. Using this new proposed method, it is shown that there is a 19.6% performance improvement in terms of the total handover latency.

2015 개정 과학과 교육과정 '통합과학'과 사범대학 예비 과학 교사 교육 내용의 분석을 통한 예비 과학 교사 교육에 대한 시사점 (Educational Implications for Pre-Service Science Teacher Training through the Comparative Analysis between 'Integrated Science' based on the 2015 Revised Science Curriculum and Educational Contents presented in the Pre-Service Science Teachers' Textbooks of the College of Education)

  • 김남희;심규철
    • 한국과학교육학회지
    • /
    • 제35권6호
    • /
    • pp.1039-1048
    • /
    • 2015
  • 본 연구는 2015 개정 '통합과학' 교육과정에서 추출한 학습 내용에 대해 과학 분야 통합성 분석과 예비 과학 교사 교육 내용과의 연관성 분석을 실시하였다. 이를 통해 예비 과학 교사 교육에 대한 시사점을 고찰하고자 하였다. 이를 위해 2015 개정 '통합과학' 교육과정과 물리학, 화학, 생명과학, 지구과학 분야에서 사용하는 11종 사범대학 예비 과학 교사 교재를 분석대상으로 선정하였다. 그 결과, 2015 개정 '통합과학' 교육과정의 학습 내용들은 비교적 과학 분야 통합성을 가진 것으로 나타났다. 또한 2015 개정 '통합과학' 교육과정에 제시된 학습 내용들은 모두 예비 과학 교사 교육 내용에 포함되었으며, 화학 분야의 교육 내용이 가장 높은 비율로 소개되었음이 확인되었다. 또한 예비 과학 교사들을 위한 교육 내용에는 '통합과학'의 '환경과 에너지' 영역 교육 내용들을 가장 많이 포함하고 있는 것으로 나타났다. 위와 같은 내용을 종합했을 때, 새로운 교육과정이 제대로 실행되기 위해서는 본 교과를 가르칠 교사들을 위해 통합과학 관련 소재들과 다양한 연수과정이 개발되어 현장에 보급될 필요가 있다. 또한, 예비 과학 교사들을 위해 사범대학 교육과정 개편, 임용 체제와의 연계 방안 마련 등이 요구된다.

A Novel Compressed Sensing Technique for Traffic Matrix Estimation of Software Defined Cloud Networks

  • Qazi, Sameer;Atif, Syed Muhammad;Kadri, Muhammad Bilal
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권10호
    • /
    • pp.4678-4702
    • /
    • 2018
  • Traffic Matrix estimation has always caught attention from researchers for better network management and future planning. With the advent of high traffic loads due to Cloud Computing platforms and Software Defined Networking based tunable routing and traffic management algorithms on the Internet, it is more necessary as ever to be able to predict current and future traffic volumes on the network. For large networks such origin-destination traffic prediction problem takes the form of a large under- constrained and under-determined system of equations with a dynamic measurement matrix. Previously, the researchers had relied on the assumption that the measurement (routing) matrix is stationary due to which the schemes are not suitable for modern software defined networks. In this work, we present our Compressed Sensing with Dynamic Model Estimation (CS-DME) architecture suitable for modern software defined networks. Our main contributions are: (1) we formulate an approach in which measurement matrix in the compressed sensing scheme can be accurately and dynamically estimated through a reformulation of the problem based on traffic demands. (2) We show that the problem formulation using a dynamic measurement matrix based on instantaneous traffic demands may be used instead of a stationary binary routing matrix which is more suitable to modern Software Defined Networks that are constantly evolving in terms of routing by inspection of its Eigen Spectrum using two real world datasets. (3) We also show that linking this compressed measurement matrix dynamically with the measured parameters can lead to acceptable estimation of Origin Destination (OD) Traffic flows with marginally poor results with other state-of-art schemes relying on fixed measurement matrices. (4) Furthermore, using this compressed reformulated problem, a new strategy for selection of vantage points for most efficient traffic matrix estimation is also presented through a secondary compression technique based on subset of link measurements. Experimental evaluation of proposed technique using real world datasets Abilene and GEANT shows that the technique is practical to be used in modern software defined networks. Further, the performance of the scheme is compared with recent state of the art techniques proposed in research literature.

다분야통합최적설계를 위한 지능형 분산 시스템 (A Distributed Intelligent System for Multidisciplinary Design Optimization)

  • 이재호;홍은지
    • 한국지능정보시스템학회:학술대회논문집
    • /
    • 한국지능정보시스템학회 2000년도 추계정기학술대회:지능형기술과 CRM
    • /
    • pp.257-266
    • /
    • 2000
  • 산업 및 가정용 기기들이 점차 복잡해짐에 따라 다양한 공학 분야의 해석 기술을 동시에 고려하면서 이들 원리를 적용한 최적의 설계를 결정하는 방법론의 필요성이 대두되고 있다. 다분야통합최적설계 또는 MDO(Multidisciplinary Design Optimization)라 일컫는 새로운 기술은 이러한 필요에 대응하는 기술로서 국내외적으로 활발한 연구가 진행되고 있다. 이러한 MDO 기술을 구현하는 소프트웨어와 하드웨어 복합 체계를 MDO 프레임웍(framework)이라 한다. 일반적으로 프레임웍이란 실제 응용프로그램의 용도에 맞는 주문제작(customization)이 가능한 일종의 전단계 프로그램이라 할 수 있다 MDO 프레임웍은 설계 및 해석 도구들간의 인터페이스를 제공하고, 이들 도구들이 사용하는 설계 데이터를 효율적으로 공유할 수 있도록 지원하여, 설계 작업을 정의, 실행, 관리하는 역할을 한다. 이러한 MDO 프레임웍은 설계 작업을 통합적으로 관리하고 자동화하여 설계 도구간의 데이터 전달과 변환에 소묘되는 설계자의 부담을 경감시키며 다분야 전문가가 참여하는 공통 작업 환경을 제공함으로써 설계 효율성을 증진시킨다. 본 논문에서는 이러한 효용을 달성하기 위한 MDO 프레임웍(framework)을 제시하고 프레임웍 설계의 논리적 근저와 타당성을 밝힌다. 본 논문에서 제안하는 다분야 통합 최적화를 위한 분산형 지능 시스템인 DisMDO는 사용자가 GUI를 동해서 편리하게 다분야통합최적화 문제를 해결할 수 있도록 지원하며, 제공되는 스크립트 언어를 동해서도 이를 정의할 수 있도록 지원하여 일괄처리도 가능하도록 한다. 또한, 집중화된 데이터베이스를 관리하여 다분야 전문가들이 공통의 데이터를 안전하게 공유할 수 있도록 지원하며, 외부에서 제공되는 해석 도구나 최적화 모듈을 손쉽게 프레임웍에 통합시킬 수 있도록 하는 인터페이스 제작기(factory) 기능을 제공한다.ackscattering spectroscopy, X-ray diffraction, secondary electron microscopy, atomic force microscoy, $\alpha$-step, Raman scattering spectroscopu, Fourier transform infrared spectroscopy 및 micro hardness tester를 이용하여 기판 bias 전압이 DLC 박막의 특성에 미치는 영향을 조사하였다. 분석결과 본 연구에서 제작된 DLC 박막은 탄소와 수소만으로 구성되어 있으며, 비정질 상태임을 알 수 있었다. 기판 bias 전압의 증가에 따라 박막의 두께가 감소됨을 알 수 있었고, -150V에서는 박막이 거의 만들어지지 않았으며, -200V에서는 기판 표면이 식각되었다. 이것은 기판 bias 전압과 ECR 플라즈마에 의한 이온충돌 효과 때문으로 판단되며, 150V 이하에서는 증착되는 양보다 re-sputtering 되는 양이 더 많을 것으로 생각된다. 기판 bias 전압을 증가시킬수록 플라즈마에 의한 이온충돌 현상이 두드러져 탄소와 결합하고 있던 수소원자들이 떨어져 나가는 탈수소화 (dehydrogenation) 현상을 확인할 수 있었으며, 이것은 C-H 결합에너지가 C-C 결합이나 C=C 결합보다 약하여 수소 원자가 비교적 해리가 잘되므로 이러한 현상이 일어난다고 판단된다. 결합이 끊어진 탄소 원자들은 다른 탄소원자들과 결합하여 3차원적 cross-link를 형성시켜 나가면서 내부 압축응력을 증가시키는 것으로 알려져 있으며, hardness 시험 결과로 이것을 확인할 수 있었다. 그리고 표면거칠기는 기판 bias 전압을 증가시킬수록 더 smooth 해짐을 확인하였다.인하였다.을 알 수 있었다. 즉 계면에서의 반응에 의해 편석되는 Ga에 의해 박막의 strain이 이완되면, pinhole 등의 박막결함

  • PDF