• Journal of the Earthquake Engineering Society of Korea
• /
• v.17 no.2
• /
• pp.61-70
• /
• 2013

An application of the EQS (Eradi Quake System) bearings to a short period building structure and the structure earthquake responses according to the design parameters of the EQS are studied by the ICT Center case study. The features of the EQS application to seismic isolated building structures are investigated, and the design procedure to determine the yield load and the secondary stiffness of the EQS is also studied. A computational analysis is performed to confirm the applicability of the EQS to the building structure and the earthquake responses according to the design parameters. The ICT Center in Indonesia is adopted as an application case of the EQS. The application of the EQS is found to extend the fundamental period of the ICT Center. Three types of EQS with different yield loads and secondary stiffness are designed and applied in the earthquake response analyses. The analysis results show the response of the structure with respect to the design parameters and which type of EQS is suitable for the ICT Center.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.1
• /
• pp.29-33
• /
• 2019

Objectives: Bone density seems to be an important factor affecting implant stability. The relationship between bone density and primary and secondary stability remains under debate. The aim of this study was to compare primary and secondary stability measured by resonance frequency analysis (RFA) between different bone types and to compare implant stability at different time points during 3 months of follow-up. Materials and Methods: Our study included 65 implants (BioHorizons Implant Systems) with 3.8 or 4.6 mm diameter and 9 or 10.5 mm length in 59 patients. Bone quality was assessed by Lekholm-Zarb classification. After implant insertion, stability was measured by an Osstell device using RFA at three follow-up visits (immediately, 1 month, and 3 months after implant insertion). ANOVA test was used to compare primary and secondary stability between different bone types and between the three time points for each density type. Results: There were 9 patients in type I, 18 patients in type II, 20 patients in type III, and 12 patients in type IV. Three implants failed, 1 in type I and 2 in type IV. Stability values decreased in the first month but increased during the following two months in all bone types. Statistical analysis showed no significant difference between RFA values of different bone types at each follow-up or between stability values of each bone type at different time points. Conclusion: According to our results, implant stability was not affected by bone density. It is difficult to reach a certain conclusion about the effect of bone density on implant stability as stability is affected by numerous factors.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.74-80
• /
• 2021

Korea Atomic Energy Research Institute (KAERI) has been operating an integral effects test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), according to APR1400 for transient experimental and design basis accident simulation. Moreover, based on the experimental data, the domestic standard problem (DSP) program has been conducted in Korea to validate system codes. Recently, through DSP-05, the performance of the passive auxiliary feedwater system (PAFS) in the event of multiple steam generator tube rupture (MSGTR) has been analyzed. However, some errors exist in the reference input model distributed for DSP-05. Furthermore, the calculation results of the heat loss correlation for the secondary system presented in the technical report of the reference indicate that a large difference is present in heat loss from the target value. Thus, in this study, the reference model is corrected using the geometric information from the design report and drawings of ATLAS. Additionally, a new heat loss correlation is suggested by fitting the results of the heat loss tests. Herein, MSGTR-PAFS accident analysis is performed using MARS-KS 1.5 with the improved model. The steady-state calculation results do not significantly differ from the experimental values, and the overall physical behavior of the transient state is properly predicted. Particularly, the predicted operating time of PAFS is similar to the experimental results obtained by the modified model. Furthermore, the operating time of PAFS varies according to the heat loss of the secondary system, and the sensitivity analysis results for the heat loss of the secondary system are presented.

• Journal of Industrial Convergence
• /
• v.19 no.3
• /
• pp.61-65
• /
• 2021

This study aimed to analyze effects of Arduino-based education for secondary school students through meta-analysis. Prior studies including journal articles and theses were selected through rigorous review. The researcher calculated the overall effect size and effect sizes by categorical variables. Research findings are as follows. First, the total effect size of Arduino-based education was 0.537. Second, the effect sizes by type of dependent variables were the affective domain 0.849 and the cognitive domain 0.479. Third, the effect sizes by school level were the middle school 0.796 and the high school 0.474. Fourth, the effect sizes by subject areas were music 1.255, science 0.562, technology 0.443, and information 0.429. Fifth, the effect sizes by types of programming were the graphic-based programming 0.543 and the text-based programming 0.376.

• Korean Journal of Materials Research
• /
• v.33 no.6
• /
• pp.257-264
• /
• 2023

To develop a high capacity lithium secondary battery, a new approach to anode material synthesis is required, capable of producing an anode that exceeds the energy density limit of a carbon-based anode. This research synthesized carbon nano silicon composites as an anode material for a secondary battery using the RF thermal plasma method, which is an ecofriendly dry synthesis method. Prior to material synthesis, a silicon raw material was mixed at 10, 20, 30, 40, and 50 wt% based on the carbon raw material in a powder form, and the temperature change inside the reaction field depending on the applied plasma power was calculated. Information about the materials in the synthesized carbon nano silicon composites were confirmed through XRD analysis, showing carbon (86.7~52.6 %), silicon (7.2~36.2 %), and silicon carbide (6.1~11.2 %). Through FE-SEM analysis, it was confirmed that the silicon bonded to carbon was distributed at sizes of 100 nm or less. The bonding shape of the silicon nano particles bonded to carbon was observed through TEM analysis. The initial electrochemical charging/discharging test for the 40 wt% silicon mixture showed excellent electrical characteristics of 1,517 mAh/g (91.9 %) and an irreversible capacity of 133 mAh/g (8.1 %).

• Journal of Chest Surgery
• /
• v.57 no.2
• /
• pp.178-183
• /
• 2024

Background: The superficial veins are commonly used in conventional autogenous arteriovenous fistulas and the placement of prosthetic grafts. When they are unsuitable, however, the use of the deep veins (venae comitantes) is generally considered to be a reasonable alternative. This study conducted a comparative analysis of clinical outcomes for arteriovenous grafts between 2 groups based on the type of venous outflow: superficial veins or venae comitantes. Methods: In total, 151 patients who underwent arteriovenous grafts from November 2005 to March 2022 were retrospectively analyzed. The patients were divided into 2 groups: group A (superficial veins, n=89) and group B (venae comitantes, n=62). The primary, secondary patency, and complication rates were analyzed in each group. A propensity score-matched analysis was performed. Results: In total, 55 well-balanced pairs were matched. Kaplan-Meier analysis revealed no significant differences in the primary patency rate between the 2 groups at 1-year, 3-year and 5-year intervals (group A, 54.7%, 35.9%, 25.4% vs. group B, 47.9%, 16.8%, 12.6%; p=0.14), but there was a difference in the secondary patency rate (group A, 98.2%, 95.3%, 86.5% vs. group B, 87.3%, 76.8%, 67.6%; p=0.0095). The rates of complications, simple percutaneous transluminal angioplasty, and stent insertion were comparable between the groups. Conclusion: Although this study demonstrated not particularly favorable secondary patency rates in the venae comitantes group, the venae comitantes may still be a viable option for patients with unsuitable superficial veins because there were no significant differences in the primary patency and complication rates between the 2 groups.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.328-337
• /
• 2017

Objective: An experiment was conducted to determine the relationship between the KAP11.1 and the regulation wool fineness. Methods: In previous work, we constructed a skin cDNA library and isolated a full-length cDNA clone termed KAP11.1. On this basis, we conducted a series of bioinformatics analysis. Tissue distribution of KAP11.1 mRNA was performed using semi-quantitative reverse transcription polymerase chain reaction (RT-PCR) analysis. The expression of KAP11.1 mRNA in primary and secondary hair follicles was performed using real-time PCR (real-time polymerase chain reaction) analysis. The expression location of KAP11.1 mRNA in primary and secondary hair follicles was performed using in situ hybridization. Results: Bioinformatics analysis showed that KAP11.1 gene encodes a putative 158 amino acid protein that exhibited a high content of cysteine, serine, threonine, and valine and has a pubertal mammary gland) structural domain. Secondary structure prediction revealed a high proportion of random coils (76.73%). Semi-quantitative RT-PCR showed that KAP11.1 gene was expressed in heart, skin, and liver, but not expressed in spleen, lung and kidney. Real time PCR results showed that the expression of KAP11.1 has a higher expression in catagen than in anagen in the primary hair follicles. However, in the secondary hair follicles, KAP11.1 has a significantly higher expression in anagen than in catagen. Moreover, KAP11.1 gene has a strong expression in inner root sheath, hair matrix, and a lower expression in hair bulb. Conclusion: We conclude that KAP11.1 gene may play an important role in regulating the fiber diameter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.2
• /
• pp.208-214
• /
• 1987

A genetic study on the panicle characters in Oryza sativa was carried out by means of a 5 x 5 diallel cross. The five parental varieties were Raekyung, Yeongnamjosaeng, Nongbaek, Yushin and Honenwase. All characters were correlated positively each other, except number of kernels per primary branch. The number of secondary branches per primary branch.was the most effective factor in determining the number of kernels per panicle, the next being the number of primary branches per panicle. Regression analyses of the data of Vr/Wr indicated the presence of non-allelic gene interactions for all characters. Overdominant characters were the number of kernels per panicle, the number of primary branches per panicle, the number of secondary branches per primary branch, the number of kernels per primary branch and sum of kernels on all the tertiary branches per panicle, suggesting that the characters were more influenced by dominant effect than additive effect. However, the number of kernels per secondary branch was partially dominant where the genetic variation was due more to additive effect than to dominance effect. But after omitting the parent which had non-allelic interaction gene, the characters; the number of kernels per panicle, the number of secondary branches per primary branch, and the number of kernels per secondary branch, were partially dominant. Narrow sense heritabilities(h$^2$ N) in number of kernels per panicle and number of secondary branches were high and moderate, respectively, but those of the rest were lower. Mean squares of GCA and SCA of all characters, except SCA of the number of kernels per secondary branch, were highly significant. Effects of GCA were larger than SCA effects in all characters. Raekyung, Yushin and Nongbaek had highly positive GCA, and the best positive SCA was observed in crosses of Nongbaek x Tongillines (Raekyung, Yushin, and Yeongnamjosaeng) in all characters.

• Korean Journal of Social Welfare
• /
• v.63 no.1
• /
• pp.159-185
• /
• 2011

This study aims to find out the determinants of male police officers' investigative behavior(active investigation vs. secondary victimization) of sexual violence. For this purpose, a hypothetical model which explains the relationships among the 5 variables (knowledge of law about the investigative role, perception of the protective & connective role, prejudice against the sexual violence, active investigation, and secondary victimization) was developed. Using the data collected from 354 male police officers of 3 cities in Gyeongnam area, the hypothetical model was tested. For data analysis, a structural equation modeling was used, and the final model was found(CFI=0.947, IFI=0.948, RMSEA=0.048). As a result of analyzing the model, the followings were found: (1) Active investigation was increased by knowledge of law about the investigative role, and perception of the protective & connective role, while decreased by prejudice against the sexual violence. (2) Secondary vicimization was decreased by knowledge of law about the investigative role. (3) Prejudice against the sexual violence mediate the effects of knowledge of law about the investigative role, and perception of the protective & connective role on active investigation. (4) Prejudice against the sexual violence was found to have no significant effect on secondary victimization. Based on the findings, multi-educational programs, protocols on investigation of sexual violence, professionalization of the police, and changes in investigation environment as well as a system of collaboration and cooperation between police officer and social worker were suggested as a way to increase active investigation and to decrease secondary victimization.

• Korean Journal of Social Welfare Studies
• /
• v.49 no.1
• /
• pp.109-132
• /
• 2018

This study investigated the impact of the secondary trauma stress experienced by workers who support sexual violence victims on occupational stress level, and verified the moderating effect of the job education from support facilities in this relationship. The data analyzed in this study were sampled from "The Primary Study on The Development of Training Program to Cultivate Professional Workers of Support Organizations for Sexual Violence Survivors" as a secondary data and 482 nationwide workers were selected. By applying SPSS PROCESS macro, the moderation model was analyzed. The analysis results are as follows. First, sexual violence victim support workers' secondary trauma stress has a significantly influence on occupational stress level of workers. Second, the job education from support agencies themselves moderates the relationship between the secondary trauma stress and occupational stress level of support agents. It also showed that the higher level of job education participates, the less the experience of being stressed on the job. Thus, on the basis of the result, the theoretical discussion on the secondary trauma stress and occupational stress level of sexual violence victim support worker was drawn out and the empirical implication on the direction of the education for job related was suggested.