• 동력기계공학회지
• /
• 제16권2호
• /
• pp.24-29
• /
• 2012

In this paper, an analysis on performance and exergy of R404A refrigeration system using R744 secondary refrigerant was performed numerically to optimize the design for the operating parameters. The operating parameters considered in this study include subcooling and superheating degree, internal heat exchanger and compression efficiency, evaporation and condensation temperature in the R404A refrigeration cycle and temperature difference of cascade heat exchanger. The main results are summarized as follows : The COP(coefficient of performance) of R404A refrigeration system increases with increasing evaporation temperature. The evaporation capacity of R744 as secondary refrigerant increases with the increase in evaporation pressure of R744 secondary refrigeration. And the enthalpy in the evaporator outlet of R744 increases with the increasing evaporation pressure of R744 secondary refrigeration. Therefore, it is important to analysis for the relationship between COP of R404A refrigeration system and refrigeration capacity of R744. As cascade evaporation temperature increase, the exergy loss of condenser and compressor using R404A is the largest among all components. Therefore, the exergy loss in the condenser and compressor using R404A must be decreased to enhance the COP of R404A refrigeration system with R744 secondary refrigerant.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.95-100
• /
• 2011

The test was done on cars travelling at speeds of 20km/h, 60km/h and 100km/h, the performance testing mode for chassis dynamometer. In this test, the secondary waveform were measured, including those using faulty MAP sensors, oxygen sensors and spark plugs. The results from these measurements and their analysis of secondary waveform can be summarized as follows: 1) The secondary waveform measured from the faulty oxygen sensor showed a lot of noise around peak voltage and in the rising and falling sections during spark line which means that the air fuel mixture was non-homogeneous. 2) The secondary waveform from the faulty MAP sensor showed the worst shape compared to other sensors, including variation of spark line, state of air-fuel mixture and velocity of flame front. 3) The spark line time of secondary waveform using a faulty spark plug displayed the shortest and smallest energy spark line, which means that a misfire occurred.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.1014-1021
• /
• 2002

Analysis of two-dimensional secondary flows given by an oscillatory motion of a liquid with a free surface in a rectangular container subject to a linear reciprocating force is performed by numerical and experimental methods. FVM is used for the numerical computation of the two-dimensional flows. We considered the effects of the free-surface properties such as the surface tension and the dilatational viscosity. The boundary-layer analysis as well as an experiment is used in establishing the free surface properties. The secondary flow patterns are visualized by a laser sheet. It is shown that the secondary flow patterns predicted by the numerical methods are in good agreement with the experimental results.

• 한국환경교육학회지:환경교육
• /
• 제22권3호
• /
• pp.112-124
• /
• 2009

Visual images are important elements of the communication of environment in secondary school environment textbooks, which dominate classroom approaches to teaching and learning. This study was to analysed the perspectives of pedagogical and social-pedagogic of visual images in 'global warming' unit of six different Korean environment textbooks. Analysis makes use of the dimensions pedagogical functions, content specialization, social-pedagogic relationships, and abstraction of the visual codes. The results showed that most of the visual images in school environment textbooks tend to establish social-pedagogic relationships with students. The results of our study have implications for textbook authors and secondary environment teachers. We suggest that future studies may focus on students' and teacher's interpretation of visual images new secondary environment textbooks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.807-812
• /
• 2001

This paper represents the wall thinning analysis results for secondary side piping of two types of domestic nuclear power plants based on the DB establishment and F AC analysis study for NPP secondary system piping. CHECWORKS code utilized in this study has been applied world widely to wall thinning analyses for secondary side piping and its reliability has also been proved. The predicted wear rates for several piping systems of a pressurized water reactor NPP are compared with those of a pressurized heavy water reactor NPP and with the measured wear rates. On the basis of comparison results of the predicted and measured wear rates, the analysis results can be effectively applied to the development of a standard thinned pipe management program targeted all domestic nuclear power plants.

• 한국연소학회지
• /
• 제4권1호
• /
• pp.141-153
• /
• 1999

Numerical analysis for the combustion flow in the combustion chamber of incineration system has been carried out in order to acquire the basic design capability of incineration system. Established mathematical model was applied to the performance prediction of the pre-designed combustion chamber of commercial plant. Especially, combustion characteristics and the variation of flow pattern have been deeply discussed in accordance with secondary air injection. Secondary air injection was effective for the turbulent mixing between air and carbon monoxide/volatile matter resulting in considerably reduced CO content at the exit. Secondary air injection was found to be one of the key design parameters because the size of recirculation zone could be changed with the variation of injection characteristics.

• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.728-733
• /
• 2017

Herein, for the quantitative analysis of the arc beads related to electric fire, we used electron backscatter diffraction (EBSD), a measuring device for grain orientation of materials, we compared and analyzed the surface texture of primary and secondary beads according to the difference in cooling rate at ambient temperature. This analysis revealed that the primary beads showed similar distribution at both low and high angles, while the secondary beads showed a higher distribution at low angles than at high angles. Thus, EBSD can be used for quantitative analysis of the beads and can be applied to identify beads in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.31-33
• /
• 1989

In this paper, a short primary-short secondary single-sided LIM which is used as a driving source for automatic conveyor system, is selected as a analysis model. And with a method for analyzing eddy current distribution and thrust force which are produced according to the relative position of primary and secondary, FEM in which current vector potential is introduced is adopted. Also, analysis results are compared with experimental results, so propriety of this at study is proved.

• 대한전기학회논문지
• /
• 제39권5호
• /
• pp.453-461
• /
• 1990

In this paper, a short primary-short secondary single-sided linear induction motor which is used as the driving source for an automatic conveyor system, is selected as an analysis model. The finite element method in which the current vector potential is introduced is adopted to analyze the eddy current distribution and thrust force which are produced according to the relative position of the primary and the secondary. Also, the analysis results are compared with experimental ones, to show the propriety of this model.

• 대한가정학회지
• /
• 제44권5호
• /
• pp.99-107
• /
• 2006

The purposes of this study are to identify the types of teacher efficacy, to present a theoretical base for teacher efficacy among Home Economics teachers and subsequently, to improve the quality in the practices of home economics education. To achieve these purposes, 263 secondary school home economics teachers were surveyed by the prime investigator. The three research questions of this study were: 1. What are the individual characteristics, the environmental characteristics and the trends of teacher efficacy among secondary school home economics teachers? 2. What is the factor in teacher efficacy among secondary school home economics teachers? 3. What are the types of teacher efficacy among secondary school home economics teachers? For these research questions, factor analysis and cluster analysis were conducted. The factor analysis on teacher efficacy with a survey of secondary school home economics teachers produced 5 factors of efficacy: classroom management, needs assistance, instructional strategies, environmental assistance and teaming assistance. The teacher efficacy had a mean of 3.58 and the home economics teachers showed a slightly higher level in teacher efficacy. Of the 5 efficacy factors, classroom management showed the highest level (M=3.89), followed by learning assistance (M=3.81), instrumental strategies (M=3.57), environmental assistance (M=3.42) and needs assistance (M=3.19). Overall, the teachers had positive feeling in teacher efficacy. Three types of teachers were found in the types of teacher efficacy: the supreme, the average and the efforts-needy. Those types were identified based on the mean scores of the five sub-domains from the factor analysis. To enhance the teacher efficacy, the needs assessments for the students and behavioral adjustment issues should be reflected in the curriculum of teacher education and workshops. The primary investigator suggested that continuous and long-term plans for teacher education need to be developed because short-term plans may not be effective in changing attitudes such as teacher efficacy.