• Journal of Environmental Impact Assessment
• /
• v.23 no.4
• /
• pp.315-322
• /
• 2014

After the modern industrial revolution, rivers in cities became covered and disappeared due to the pressure to develop them. Likewise, their function which is to serve as the basis of natural ecology system in the cities began to be damaged. This research demonstrated that there are a total of 268 categories when it comes to the list of plants, including 64 families, 179 genera, 230 species, 36 varieties, and 1 subspecies. When the relative abundance of the plants that were found at the target research site was studied, the secondary survey demonstrated Bromus japonicus 22.97, Artemisia princeps var. orientalis 16.76 and Erigeron annuus 15.69 while third survey demonstrated Digitaria ciliaris 26.78, Ambrosia trifida 16.29 and Aster pilosus 14.31. There were 54 species of naturalized plants that appeared. Analysis demonstrated annual plant 23 classification category (43%), perennial 11 classification category (20%), multi-perennation 17 classification category (31%), woody plant 3 classification category (6%) and others. When the naturalized plants that were found at the target research site were analyzed by the place of origin, North America and EU took up 76%, which accounts for 3/4 of the all the naturalized plants. At the target research site, naturalization degree of 5 pertained to 22 classification category (41%), which was the highest, followed by 19 classification category (35%) with naturalization degree of 3, 8 classification category (15%) with naturalization degree of 2 and 5 classification category (9%) with naturalization degree of 4 in the order mentioned. Flora of Jungnangcheon did not manifest any change compared to 10 years ago. Thus, it is necessary to increase of biodiversity efforts to improve SeoulCity's natural environment and cityscape.

• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2001

The alloys $ZrMn_2Ni_x$ (x=0.0, 0.3, 0.6, 0.9 and 1.2) as the alloys of Zr-Mn-Ni three component system were prepared and their hydrogen-storage properties and their electrochemical properties were investigated. The C14 Laves phase formed in all the alloys $ZrMn_2Ni_x$. Among these alloys $ZrMn_2Ni_{0.6}$ was activated relatively easily(after about 11 charge-discharge cycles), and had the largest discharge capacity(max. 45mAh/g). For all the alloys Zr was dissolved most easily into the 6M KOH solution. More Mn and Ni were dissolved from the $ZrMn_2Ni_{0.6}$ alloy than from the other alloys. Due to the active charge and discharge of the $ZrMn_2Ni_{0.6}$ alloys, related to the easier activation and the larger discharge capacity, Zr, Mn and Ni in this alloy were considered to be dissolved more easily into the 6M KOH solution, compared with the other alloys.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.211-216
• /
• 2010

Boron trifluoride lithium methacrylate ($BF_3$LiMA)-based gel polymer electrolytes (GPEs) were synthesized with various $BF_3$LiMA concentration to elucidate the effect on ionic conductivity and electrochemical stability by a AC impedance and linear sweep voltammetry (LSV). As a result, the highest ionic conductivity reached $5.3{\times}10^{-4}Scm^{-1}$ at $25^{\circ}C$ was obtained for 4 wt% of $BF_3$LiMA. Furthermore, high electrochemical stability up to 4.3 V of the $BF_3$LiMA-based GPE was observed in LSV measurement since the counter anion was immobilized in this self-doped system. On the other hand, it was assumed that there was a rapid decomposition of electrolytes on a lithium metal electrode which results in a high solid electrolyte interface (SEI) resistance. However, a high stability toward graphite or lithium cobalt oxide (LCO) electrode thereby a low SEI resistance was observed from the AC impedance measurement as a function of storage time at $25^{\circ}C$. Consequently, the high ionic conductivity, good electrochemical stability and the good interfacial compatibility with graphite and LCO were achieved in $BF_3$LiMA-based GPE.

• Applied Microscopy
• /
• v.2 no.1
• /
• pp.39-46
• /
• 1972

There are many kinds of microscopes suitable for general studies; optical microscopes(OM), conventional transmission electron microscopes (TEM), and scanning electron microscopes(SEM). The optical microscopes and the conventional transmission electron microscopes are very familiar. The images of these microscopes are directly formed on an image plane with one or more image forming lenses. On the other hand, the image of the scanning electron microscope is formed on a fluorescent screen of a cathode ray tube using a scanning system similar to television technique. In this paper, the features and some applications of the scanning electron microscope will be discussed briefly. The recently available scanning electron microscope, combining a resolution of about $200{\AA}$ with great depth of field, is favorable when compared to the replica technique. It avoids the problem of specimen damage and the introduction of artifacts. In addition, it permits the examination of many samples that can not be replicated, and provides a broader range of information. The scanning electron microscope has found application in diverse fields of study including biology, chemistry, materials science, semiconductor technology, and many others. In scanning electron microscopy, the secondary electron method. the backscattererd electron method, and the electromotive force method are most widely used, and the transmitted electron method will become more useful. Change-over of magnification can be easily done by controlling the scanning width of the electron probe. It is possible. to continuously vary the magnification over the range from 100 times to 1.00,000 times without readjustment of focusing. Conclusion: With the development of a scanning. electron microscope, it is now possible to observe almost all-information produced through interactions between substances and electrons in the form of image. When the probe is properly focused on the specimen, changing magnification of specimen orientation does not require any change in focus. This is quite different from the conventional transmission electron microscope. It is worthwhile to note that the typical probe currents of $10^{-10}$ to $10^{-12}\;{\AA}$ are for below the $10^{-5}$ to $10^{-7}\;{\AA}$ of a conventional. transmission microscope. This reduces specimen contamination and specimen damage due to heatings. Outstanding features of the scanning electron microscope include the 'stereoscopic observation of a bulky or fiber specimen in high resolution' and 'observation of potential distribution and electromotive force in semiconductor devices'.

• Korean Journal of Environment and Ecology
• /
• v.24 no.2
• /
• pp.186-193
• /
• 2010

In order to examine the traits of sluice gate water control, halophyte community formation and their inter-relations in Saemangeum, both water level condition and halophyte community formation were analyzed periodically and spatially on the topographic map with Surfer, Saemageum Spatial Analysis System, and related field reports. The traits of water level condition are that average water level in the growing period of halophytes was similar to annual average water level, annual low level and high level appeared in the growing period, and water level was usually maintained within a range of -1.0m~0.5m above mean sea level, but it has changed more frequently year by year. Routine water level control, natural disaster prevention, construction, and civil appeal took major percentages of the reasons for sluice gate's opening and shutting. Since 2007, not only the overall control frequency of sluice gate but also its control frequency for construction and natural disaster prevention have increased outstandingly. Halophyte community had formed at a rate of 1,209ha/year in the 4,315 ha land in 2008, 6.3 times larger than in 2005, and 2,382 ha above around 1.0m was estimated to be artificially vegetated, 89.1 % of the 2,673ha-size sown area. High water level was found to be a more possible determinant than average water level or low water level in halophyte community formation and it was thought to be secondary factors whether tillage was conducted or/and whether surface sealing formed.

• Proceedings of the Ginseng society Conference
• /
• 2004.05a
• /
• pp.17-28
• /
• 2004

As Korean ginseng is hybrid, an individual variation is very severe, and it takes long times in new breeding because it is required 4 years to pick the seed. But, transformation technique makes the high-functional breeding in short time. The focus of these ginseng studies is to find and secure the useful gene. And it is urgent to accumulate the fundamental data for the molecular breeding and secure the useful genes. Therefore, transformation and soil acclimatization technique are necessary to molecular breeding in use of the introduction of functional genes. In this study, it add to secure of new regulation gene and useful gene as to accumulate the fundamental data for the place where it will contribute to raise the national competitive power. To analyze the useful genes in large scale, we constructed CDNA libraries with various tissues, species, and treated tissue. EST analysis of ginseng perform in large scale and build the EST database of ginseng. We perform the full length sequencing about the selected lots of clones that include the entire open reading frame of the amino acid residues and construct cDNA chip with the parental EST clones. Establishment of the transformation and a soil acclimatization system throuth the re-introduction of the selected ginseng gene that related with the secondary metabolism and anti-stress into the ginseng.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.1
• /
• pp.99-113
• /
• 2007

Purpose : This study was designed to investigate the effects of Jeongkyeong-Tang(JKT) on the polycystic ovary(PCO) induced by estradiol valerate(EV) in rats. Methods : PCO was induced by single intramuscular injection with EV(4mg) in female rats. Normal group(n=8) were injected with sesame oil and orally administrated distilled water for sixty days. PCO control group(n=8) were injected with EV and orally administrated distilled water for sixty days. JKT treated group(n=8) were injected with EV and orally administrated JKT for sixty days. Then we measured weights of body, ovaries and adrenal glands, and measured content of serum estrogen. The histomorphometrical changes of ovaries were also evaluated. The expressions of nerve growth factor(NGF) were analyzed in the central nervous system, adrenal glands and ovaries by immunohistochemistry. Results : - The weights(mg) of ovaries in JKT treated group (69.7${\pm}$6.7) were significantly increased( p<0.001) compared with PCO control group(46.7${\pm}$12.2). - The numbers of secondary follicles in JKT treated group(4.00${\pm}$l.31) were significantly increased(p <0.05) compared with PCO control group(2.25${\pm}$1.39). - The numbers of mature follicles in JKT treated group(5.50${\pm}$1.51) were significantly increased(p<0.01) compared with PCO control group(2.88${\pm}$1.13). - The numbers of atretic follicles in JKT treated group(2.75${\pm}$l.16) were significantly decreased(p<0.001) compared with PCO control group(6.88${\pm}$2.03). - The numbers of corpora lutea in JKT treated group(4.13${\pm}$1.46) were significantly increased(p<0.01) compared with PCO control group(2.13${\pm}$1.46). - The contents(pg/ml) of serum estrogen in JKT treated group(115.18${\pm}$18.29) were significantly decreased(P<0.01) compared with PCO control group(153.06${\pm}$29.47). - The expressions of NGF-immunoreactive cells in the ovarian granulosa cells in JKT treated group were lesser observed than PCO control group. Conclusion : From the above results, we concluded that Jeongkyeong-Tang has inhibitory effect on the development of EV-induced polycystic ovary. And it's effect may be related with decreased NGF activities in the ovary.

• Solar Energy
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1993

The purpose of this research is to investigate the characteristics of heat transfer in the downward axisymmetric free water jet system impinged on a flat oblique plate which has the uniform heat flux. Experimental conditions considered were Reynolds number, distance between nozzle and Bat plate, inclination angle of heater surface and nozzle exit velocity. Local Nusselt number was subjected to the influence of Re number, Pr number, oblique angle of heating surface and local position of flat plate. In the wall region of downward surface, The secondary peak point of heat transfer appeared at the local point of X/D=-8 from the stagnation point. The stagnation heat transfer rate of this experimental study augments 2.4 times than that of laminar theorical solution. The stagnation nusselt number is function of Reynolds number, nozzle-plate spacing Prandtl number and oblique angle of impinging plate.

• Korean Journal of Acupuncture
• /
• v.31 no.1
• /
• pp.33-39
• /
• 2014

Objectives : This study was designed to evaluate the feasibility of further acupuncture research as an effective and safe treatment for reducing cancer-related upper abdominal pain in patients treated with Neurolytic celiac plexus block(NCPB). Methods : This study is a randomized controlled pilot clinical trial of 3-week duration. Fourteen patients will be recruited and randomly allocated to 2 groups: an acupuncture plus NCPB group(experimental group) and a NCPB group(control group). All patients will undergo one session of NCPB, but only the experimental group will receive three acupuncture sessions a week for 2 weeks(6 in total). The primary outcome will be measured using the visual analogue scale, and the secondary outcome will be measured using the Painvision system and the consumption of additional analgesics. Assessments will be made at baseline and at 1, 2, and 3 weeks thereafter(that is, the 3-week assessment will be made 1 week after treatment cessation). Conclusions : This clinical trial will inform the design of a full-scale trial. The outcomes will provide information to facilitate the incorporation of acupuncture into existing pain management methods such as NCPB in the treatment of cancer-related upper abdominal pain patients.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.168-177
• /
• 2011

The combustion test for real box of AC outdoor unit has been performed in this study in order to estimate the fire hazard in multi-system type of AC outdoor unit which is currently used for commercial use. The result showed that in test, there was explosion inside of AC outdoor unit, and flame erupted and fire spread through upper side grill. And then this fire burnt the combustibles such as wires, electronic control board, heat exchange copper plate and plastics etc inside the unit, refrigerant gas pipe was burst due to fire, and accelerated the explosion and flame eruption to outside while the refrigerant was erupting. It is found in this test that the maximum heat release rate of AC outdoor unit is 5,830 kW, the maximum internal temperature measured with infrared camera and thermocouple is $1,201^{\circ}C$, maximum ambient temperature is $881^{\circ}C$, and flame rose higher than about 5 m. It is concluded that the fire in AC outdoor unit cause fire to combustibles around the unit, and may give big damage by generating the secondary fire. It is expected that the result obtained from the test on the real object may be applied to fire realization of AC outdoor unit and estimation of fire spreading to the combustibles around in the future computer simulation.