• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.369-376
• /
• 2017

The trend analysis of the study was acquired by selecting multiyear monthly groundwater table data and monitors the wells in each sub-district under the study area. The intention of this research was to analyze the outcome of the non-parametric Mann-Kendall test at greater than the significance level which is 95% of groundwater level in Sylhet. The aptitude is effective at two conjunctures where the confidence bounds are 95% and it meets the estimate line of Sen's. To calculate and assess the spatial differences in the inanition of groundwater table, geostatistical methods was applied based on data from 27 groundwater wells during the period from January 1975 to December 2011 which were obtained from a secondary source, Bangladesh Water Development Board. The geographic information system was used to assess the spatial change in order to find the level of groundwater. Cross-validation errors were found within an advisable level in estimating the groundwater depth with different interpolation models of ordinary kriging methods. Finally, surface maps were generated with the best-fitted model. The southeast region was found highly vulnerable from groundwater level point of view. Northern region was detected highest hazard prone area for diverge groundwater using kriging method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.544-547
• /
• 2011

This paper describes on hardware simulation of passive power control of propulsion system for electric propulsion aircraft of KARI. The propulsion system uses hybrid power system that is composed of solar cell, fuel cell and battery. The fuel cell is replaces by simulator due to its difficulty in handling while the other components are the same as that will be used on board. As the result, reliable power supply for propulsion is confirmed and each power source is well operated showing its characteristics.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.3
• /
• pp.441-451
• /
• 2016

Squalene is a linear triterpene formed via the MVA or MEP biosynthetic pathway and is widely distributed in bacteria, fungi, algae, plants, and animals. Metabolically, squalene is used not only as a precursor in the synthesis of complex secondary metabolites such as sterols, hormones, and vitamins, but also as a carbon source in aerobic and anaerobic fermentation in microorganisms. Owing to the increasing roles of squalene as an antioxidant, anticancer, and anti-inflammatory agent, the demand for this chemical is highly urgent. As a result, with the exception of traditional methods of the isolation of squalene from animals (shark liver oil) and plants, biotechnological methods using microorganisms as producers have afforded increased yield and productivity, but a reduction in progress. In this paper, we first review the biosynthetic routes of squalene and its typical derivatives, particularly the squalene synthase route. Second, typical biotechnological methods for the enhanced production of squalene using microbial cell factories are summarized and classified. Finally, the outline and discussion of the novel trend in the production of squalene with several updated events to 2015 are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.7
• /
• pp.7-15
• /
• 2008

A single active capacitor snubber-assisted soft-switching sinewave pulse modulation utility-interactive power conditioner with a three-winding flyback high frequency transformer link and a bidirectional active power switch in its secondary side has been proposed. With the aid of the switched-capacitor quasi-resonant snubber cell, the high frequency switching devices in the primary side of the proposed DC-to-AC sinewave power inverter can be turned-off with ZVS commutation. In addition to this, the proposed power conditioner in the DCM can effectively take the advantages of ZCS turn-on commutation. Its output port is connected directly to the utility AC power source grid. At the end, the prototype of the proposed HF-UPC is built and tested in experiment. Its power conversion conditioning and processing circuit with a high frequency flyback transformer link is verified and the output sinewave current is qualified in accordance with the power quality guidelines of the utility AC interactive power systems.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.51-58
• /
• 1998

A numerical program has been developed to model 2-D resistivity responses for a pole-pole array configuration in cross-hole resistivity measurements. Apparent resistivity and secondary potential were computed using the program for a cylindrical inhomogeneity in an uniform host medium excited by a point source of current in a borehole. Surprisingly apparent resistivity in the receiver hole turns out to be lower than the one of surrounding medium regardless of the conductivity of cylindrical inhomogeneity. Using only cross-hole data, therefore, it is impossible to interpret the conductivity of inhomogeneity. To overcome this problem, 3-D measurement and interpretation are necessary. If 3-D data acquisition is impossible, inline data should be used to get the information about the conductivity of inhomogeneity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.708-713
• /
• 1994

A new flux observer based vector control system of an induction motor is constructed by using an observer in which the commanded stator currents are used to estimate the rotor flux. In this system, the flux observer is formulated by using a model of induction motor in a stationary coordinate system. By considering an observer of induction motor in a fixed co-ordinate system located on its secondary flux, a slip frequency controlled type of vector control system is also proposed. From these control schemes, the relation between the conventional slip frequency controlled type system and the observer based one is clarified. The steady-state error of the developed torque which is caused by the parameter change of induction motor is analyzed and discussed for the selection of observer gains. The poles of the observer error dynamics and those of the observer based vector control system are calculated analytically by neglecting the machine parameter change. In order to analyze the robust stability, a linear model of the observer based vector control system is proposed taking into account the machine parameter change. By using this model, the trajectories of the poles and zeros of the torque transfer function are computed and discussed. To test validity of the theoretical analysis, experiments are conducted by using a digital signal processor (TMS320C30) and a current controlled voltage source PWM inverter.

• Journal of The Korean Association For Science Education
• /
• v.8 no.1
• /
• pp.57-72
• /
• 1988

It is very important for a teacher to know what his students know and what they do not; however, it seems not true for the most Korean secondary school science techers. This study tried to find students' misconception Newton's third law and the sources of the misconceptions. The researcher examined 609 students from middle schools, high schools, and college. In this study, students' understanding on Newton's third law were examined by school level, sex, stream (science and liberal arts), and departments. The following results were obtained by this study. 1. Students' understanding seemed to be improved continuously from middle school to university; however, their misconception (the most frequent incorrect selection of options of the test items) did not changed very much. 2. Students' answers were significantly affected by size of objects, existence of physical contact and the existence of life in the objects. 3. The answer were significantly affected by the source of attraction. 4. The answer to Newton's third law were affected by the magnitude of potential force which the target bodies have, state of motion, velocity, weight, friction and acceleration. This study could show the sources of the misconception on Newton's third law. The identified sources could be very useful for designing an instruction to teach Newton's third law in schools and universities.

• Journal of The Korean Association For Science Education
• /
• v.32 no.3
• /
• pp.532-540
• /
• 2012

This research investigated the motivation and interests of a sample of predominately-underrepresented populations to better understand whether informal STEM learning experiences offer support for developing STEM identities. A valid and reliable three-section self-reporting survey was administered to 169 secondary students as the primary data source. Identity was used as a theoretical lens along with descriptive statistics to reveal students' perceived benefits of the informal STEM learning experience, a Mathematics, Engineering, Science Achievement (MESA) program in the western U.S., for improving their understanding of science, mathematics, and engineering concepts, increasing their interest in science, mathematics, and engineering careers, and increasing their belief of the importance of these STEM disciplines. In summary, the findings emerging, considered alongside current identity research, suggest that informal STEM learning experiences offer students from underrepresented STEM populations the space needed for successful STEM identity bids, either for future career pursuits or participation in a STEM literate populace as a non-STEM professional societal member.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1307-1314
• /
• 1994

The aim of this work is to show the way of manufacturing the SiC mechanical seal at the low temperature of 130$0^{\circ}C$ using clay and frit as source of secondary phase. $\alpha$-SiC and $\beta$-SiC powder which showed different distribution of particle were used as starting materials, i.e. average particle size of $\alpha$-SiC was larger than that of $\beta$-SiC. The mechanical and tribological properties of two groups of specimen, i.e. one contained mainly larger $\alpha$-SiC powder and the other mainly fine particle $\beta$-SiC, were measured. The specimen consisted of larger $\alpha$-SiC exhibited lower density flexural strength and wear resistance is comparison with these of sample containning mainly $\beta$-SiC . This difference could be originated from the dependence of capillary force on the particle size. For the larger SiC particle, the liquid phase may not fill the whole pores during sintering, due to low capillary force, whereas the liquid phase can infiltrate into the small ores surrounded small $\beta$-SiC particle. Thus, the course of high flexural strength and high wear resistance of specimen prepared using small particles can be explaced from the easy infiltration of liquid phase.

• Journal of Family Resource Management and Policy Review
• /
• v.14 no.4
• /
• pp.77-100
• /
• 2010

Locals' initiating the community making projects is considered as a good approach in terms of the effectiveness, sustainability and government's budget. But there are not the local institutions' support, while local people alone may face difficulties in starting and managing the projects. This study is to explore the roles of the institutions for starting and managing the family-friendly communities. For this purpose, 18 secondary source cases from the livable community making projects were analyzed. And the major findings of this study were as follows: The (local) institutions need to gain credibility from the locals before starting the family-friendly community project. In the motivation steps, the institution performs the role of a proposer, a survey researcher, an opinion gatherer and mediator. In the systematization steps, the institution needs to perform as a mentor, a developer of human and non-human resources, a conflict mediator, an education practitioner, an instructor, a networker, and an administrative staff. In the execution steps, the institution needs to perform as a cultural program planner, a public relations personnel, and an assessor. In conclusion, the institution needs to train community coordinator and develop programs to educate local residents for the effective family-friendly community projects.