• Health Policy and Management
• /
• v.7 no.2
• /
• pp.89-108
• /
• 1997

The purpose of this study is to investigate drug information sources which influence physician's prescriptions, and to compare the differences of drugh information sources between private practitioners and hospital physicians. In addition, the ultimate goal of this study is to provide better quality of drug information for both groups of physicians through the professional drug information system. 264 physicians, including general practitioners and all types of specialists who were working in hospitals and private clinics in Taejon and Chungnam area, participated in this study which was conducted by mail. The results are summarized as follows ; 1. Both physician groups received drug informations mainly from medical journals, but there were differences in secondary sources of drug information. Namely, hospital physicians got drug information from annual meetings and textbooks, and private practitioners got it from detail men and colleagues. 2. Drug effect was the first consideration for drug selection in both physician groups. But, in the 2nd consideration, private practitioners concerned about the price, insurance and rebates, but hospital physicians were not. 3. Only 9.2% of the private practitioners satisfied with the sufficiency of drug information, whereas 22.0% of hospital physicians satisfied with it. The most insufficient area of information was drug interaction in both groups and 91.9% of the physicians suggested that a professional drug information system should be introduced. 4. Both physician groups had contacted with detail men frequently. However, it was rare for them to contact with a pharmacist. This phenomenon was more severe in the case of private practitioners. 5. Neither physician groups knew very much about drug informatio centers. However, they would be willig to participate if a professional drug information system were established. Also, they indicated that the information most required was drug interaction.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.431-438
• /
• 1996

The dietary intake of nutritional elements by Koreans as determined by the Ministry of Health and Welfare's National Nutrition Survey have been reported for $1969{\sim}1993$. But these data were based on not dish but food. Therefore, the purpose of this study was to compare dish sources of energy and macronutrients (carbohydrate, fat, protein) in the diets of three area (large city, small city and rural). Dish sources were evaluated from two-day record obtained in the secondary analysis of the 1993 Korean National Nutrition Survey. The result, large city and small city had higher fat and protein intake than did rural. Otherwise, carbohydrate intake among rural was higher than those among large and small city (p<0.05). The primary dish source of energy and macronutrients was cooked rice for all area. The percentage of cooked rice in daily carbohydrate intake was 52.64% for nationwide, 48.40% for large city, 50.52% for small city, 61.79% for rural. The cumulative percent of top 10 dish sources to carbohydrate for large city, small city, rural were 78.02%, 81.16%, 85.69%, respectively. These was higher than cumulative percent of other macronutrients. The milk as good protein source ranked 3 for large city, 6 for small city, 22 for rural. The major dish sources to fat were cooked rice and pork that prepared by various cooking way. These results show that the major dish sources of energy and macronutrients were cooked rice based of Korea traditional consumption pattern. The most of nutrient intake consumed some dishes for all area. The dish consumption pattern was generally similar between large and small city. But rural was different from other area. Threfore, nutrition educations and interventions should be targeted to each area and should be attended with studies that comparision of dish sources to nutritional elements by specific age-sex groups.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.43-49
• /
• 2018

Computer simulation was performed using the SIMION program to develop an electron gun for MCP cleaning. The target, MCP, is located 180mm from the source of the electron gun, and the diameter of the MCP is approximately 20mm. Therefore, we tried to find the condition that the beam diameter of electrons reaching the MCP is to be 20mm using four variables such as E, ${\phi}$, d1, d2, where the E is the energy of the electron reaching the MCP, the ${\phi}$ is the diameter of the extractor, and the d1 and the d2 are the distance from the electron source to the end of the extractor tube, and to the wall of chamber, respectively. As a result of simulation, we figuried out that the E and the d2 have little effect on the beam diameter. On the other hand, we also found that the beam diameters were very sensitive to the d1 and varied relatively large with respect to the ${\phi}$, and the d1 was the secondary order function of the ${\phi}$. Therefore we found that this function will allow us to design electron guns that are suitable for the purposes of this study.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.195-206
• /
• 2021

Contaminated marine sediment is a secondary pollution source in the coastal areas, which can result in increased nutrients concentrations in the overlying water. We analyzed the nutrients release characteristics into overlying water from sediments and the interaction among benthic circulation of nitrogen, phosphorus, iron, and sulfur were investigated in a preset sediment/water column. Profiles of pH, ORP, sulfur, iron, nitrogen, phosphorus pools were determined in the sediment and three different layers of overlying water. Variety types of sulfur in the sediments plays a significant role on nutrients transfer into overlying water. Dissimilatory nitrate reduction and various sulfur species interaction are predominantly embodied by the enhancing effects of sulfide on nitrogen reduction. Contaminant sediment take on high organic matter, which is decomposed by bacteria, as a result promote bacterial sulfate reduction and generate sulfide in the sediment. The sulfur and iron interactions had also influence on phosphorus cycling and released from sediment into overlying water may ensue over the dissolution of ferric iron intercede by iron-reducing bacteria. The nutrients release rate was calculated followed by release rate equation. The results showed that the sediments released large-scale quantity of ammonium nitrogen and phosphate, which are main inner source of overlying water pollution. A mechanical migration of key nutrients such as ammonia and inorganic phosphate was depicted numerically with Fick's diffusion law, which showed a fair agreement to most of the experimental data.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.238-244
• /
• 1994

To investigate the bacterial potentials for utilizing dissolved organic matter in highly eutrophic estuary, the annual fluctuations of microbiological and physicochemical environmental parameters were analyzed in Naktong River Estuary. Total bacterial number ranged from 0.33 to $2.09{\times}10^7$ cells/ml, and correlated with the heterotrophic bacterial numbers in more eutrophic sites, especially. Bacterial biovolume and biomass varied between 0.064 and 0.156 2.09${\mu}m^3$/cell, 0.163 and 1.036 ${\mu}g$-C/ml, respectively. Bacterial secondary productivity ranged from 0.24 to 60.86 ${\mu}g$-C/l/h, and showed high correlations with the environmental parameters of pollution indicator. The seasonal variation pattern of bacterial productivity in freshwater sites was high in winter and low in summer, which was interpreted as the results of pollution loads varied with the amount of rainfall. In seawater site, the pattern was different from those of freshwater sites; high in summer and low in winter. In this site, the values of bacterial productivity showed positive correaltions with chlorophyll a, heterotrophic bacterial number, and temperature (r>0.5, p<0.05). These results suggested that the main source of organic matter which influences the bacterial productivity may be allochthonous materials in the upper freshwater zone of Naktong River Barrage, and autochthonous algal excretory products in the lower seawater zone of Naktong River Barrage.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.76-84
• /
• 2017

This study selected a method which uses high early strength cement as a way to reduce the curing time and curing energy source of concrete secondary products and reviewed the improvement in the initial strength of concrete secondary products setting the target strength of the concrete capable of removing the form to 15MPa and the curing time to 6 hours. As a result of the test, the only specimen which achieved the form removal strength of 15 MPa only through atmospheric curing within the target curing time of 6hours was ACC-100, and the specimens of TRC-100 and TRC-50 satisfied the values of 6 hours and 15MPa through steam curing. However, we could see that it was difficult to secure workability in the case of the specimen of ACC-100 due to its high rapid setting property and a retarder such as anhydrous citric acid was required to be used to improve the workability. When we look into the pattern following changes in the water to binder ratio, while, in the case of stream curing, OPC-100, TRC-100, and TRC-50 were all found to satisfy achievement of the form removal strength within 6hours as the water to binder ratio decreased, in the case of atmospheric curing, TRC-100, and TRC-50 achieved 15MPa within 12hours.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.234-240
• /
• 2009

$Mg(OH)_2$ particles were prepared by precipitation and a hydrothermal treatment to examine the effect of $MgCl_2$ concentration, alkali type and concentration, temperature, hydrothermal treatment on the formation of $Mg(OH)_2$ particles using full factorial design, as one of DOE (Design of experiment) methods. The primary particle size is similar to the secondary particle size for the samples after the hydrothermal treatment, where the average particle size of $Mg(OH)_2$ increased with increasing the concentration of $MgCl_2$ and hydrothermal temperature and decreasing alkali/Mg molar ratio. On the other hand, for the samples prepared from precipitation, the secondary particle size is larger than the primary particles due to aggregation. The difference in alkaline source is that the particles prepared from $NH_4OH$ exhibit the larger size with better dispersion than those from NaOH. Low density polyethylene and ethylene-co-vinyl acetate (LDPE-EVA) resin composed of the smaller secondary particle size of $Mg(OH)_2$ shows a higher limited oxygen index (LOI) at 50 and 55% loading, but the smaller primary particle size may result in a better grade in UL-94 tests. At the high loading of 60%, all samples with any preparation methods exhibit V-0 grade but the LOI value depends on not only primary particle size but also dispersion state.

• Proceedings of the Population Association of Korea Conference
• /
• 2006.12a
• /
• pp.113-128
• /
• 2006

The main theme of this paper was to investigate the role of education as a source of economic growth in Korea. In this study, first, the objective mode was built by extending neoclassical Solow growth theory. Second, the capital deepening typical of an endogenous economic per-capita growth model was developed empirically for seven East-Asian economies as for the medium term, during $1975{\sim}2004$. And then we found the meaning of coefficients of growth factors, direct relative contribution of each input to per-capita growth in seven East-Asian countries, relative indirect contribution of education to per-capita growth in Korea, accounting for difference due to accumulation in Korea. The indirect relative contributions of secondary and higher education and R&D to per-capita growth change the results somewhat. Secondary education is still the largest single contributor 83.6 percent of predicted growth is due to secondary school enrollment in Korea. Primary education comes second with 37.5 percent and followed by higher education at -52.9 percent. Physical investment gives 62.3 percent and unimproved raw labor contributes only -1.4 percent.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.218-233
• /
• 2005

Purpose : To investigate clinical-epidemologic aspect of infertility patients in Conmaul Oriental Hospital. Methods : From 2003, 5 to 2004, 4, a total 1223(female 943, male 280) patients was recruited, and their medical records were reviewed retrospectively. Results : The mean age of female was $31.83{\pm}3.63$ yesrs, and $34.08{\pm}3.66$ years in male. The mean BMI of female was $20.83{\pm}2.74$, and $24.36{\pm}3.03$ in male. The most common occupation of female was profession, administration, management.The primary infertility was 52.9% and the secondary infertility 47.1%. The most common past history in female was laparotomy. The mean duration of infertility was $3.32{\pm}2.5$ years and $3.9{\pm}2.63$ years in female and male. 83.6% of secondary infertility women experienced abortion. The incidence of patients with both combinded infertility factors of female and male was the most highest, and the most common single factor was ovulatory. 92.4% of female patients took sterility tests, 71.0% of male patients took semen analysis. 50.8% female took ovulation induction, IUI, IVF before coming. 8.91% of female and 72.14% of male were accompanied by their spouse. 61.2% of female took sterility test with their spouse. Female's duration of treatment was longer than man's. The most reliable source of choices was encouragement of family members, acquaintance. Conclusion : In this study, we presented staus concerend with infertility and the characteristics of patients went to oriental hospital. Furthermore, the study about oriental treatments and the results of that treatments is required.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1080-1084
• /
• 2011

Urban maglev should have such characteristics as not only environmentally friendliness and excellent driving capability but also curve negotiation performance because its routes have many sharp curves. Due to normal mechanism of urban maglev its relative displacements of secondary spring are bigger than conventional railway vehicle and the centering force of levitation magnet is smaller than wheel-on-rail system. These features of maglev affect the curving negotiation and so the additional steering device is to be required on Urban maglev to improve the running performance at sharp curve of less than about R50m. Some developed urban maglev had the passive steering device which consists of mechanical linkage or hydraulic cylinder and closed-route piping. But it has drawback as complexity of layout of understructure of vehicle and functional limitation of passive mechanism regarding transient curve. These demerits could be solved by using active steering system. But it has a weak point that an active device should have actuators and additional inverter or hydraulic power source. In this paper, the semi-active steering system for urban maglev is to be introduced.