• Advances in aircraft and spacecraft science
• /
• 제11권1호
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.681-686
• /
• 2004

Ti-ZSM-5 prepared by secondary synthesis, from the reaction of H-ZSM-5 with vapor phase $TiCl_4$, was characterized with several physicochemical techniques including FT-IR and UV/VIS-DRS. It was found that zeolite structure, surface area and pore volume did not change, and the framework aluminum could not be replaced by titanium atom during the secondary synthesis of Ti-ZSM-5. The incorporation of titanium into the framework might be due to reaction of $TiCl_4$with the silanol groups associated with defects or surface sites. The formation of extra-framework titanium could not be avoided, unless the samples were further treated by water vapor at 550 $^{\circ}C$ or higher temperature. High temperature steam treatment of Ti-ZSM-5 prepared by chemical vapor deposition with $TiCl_4$was efficient to prevent the formation of non-framework titanium species. Ti-ZSM-5 zeolites prepared in this work contained only framework titanium species and exhibited improved catalytic property close to TS-1 prepared by hydrothermal synthesis.

• Archives of Reconstructive Microsurgery
• /
• 제3권1호
• /
• pp.9-15
• /
• 1994

It is difficult to obtain a satisfactory bony union of large bone defect secondary to trauma, tumor resection, congenital pseudarthrosis of tibia and bony metaplasia following infection with conventional methods. Conventional nonvascularized autologous bone graft do not provide adequate large amounts of donor bone and usually undergo necrosis or nonunion due to lack of vascular nutrition. Currently, advanced in microsurgery have made it possible to provide a continuing circulation of blood in bone grafts so as to ensure viability. With the nutrient blood supply preserved, healing of the graft to the recipient bone is facilitated without the usual replacement of the graft by creeping substitution. Thus, the grafted bone is achieved more rapid stabilization without sacrificing viability. We reviewed 11 cases of vascularized fibular grafts which were performed from December 1982 to January 1993 and the following results were obtained: 1. Large bone defects with chronic osteomyelitis secondary to trauma were could be successfully treated by the vascularized fibular transfer. 2. In our experience, the vascularized fibular transfer was thought to be one of good methods of treatment for congenital pseudathrosis of tibia. 3. Complete tumor resection was followed by a free vascularized fibular transfer, resulting in good functional improvement, without local recurrence. Long bone defect secondary to bony dysplasia was could be reconstructed by the vascularized fibular transfer. 4. The transferred vascularized fibula had been hypertrophied with bony union during follow-up period and there was no resorption of the grafted fibula.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.130-136
• /
• 1995

Vestibuloplasty are following categories : Mucosal advancement(submucous), secondary epithlization(reepithelization) and grafting vestibuloplasty. Although certain procedures are indicated for alveolar bone loss and sulcus shortening, relapse can occur. Every efforts to minimize or compensate for it is controversy. O'Steen(1970) reported the mucous graft methods that none of vestibular shrinkage and graft contracture. 15patients in mucous graft vestibuloplasty with fibrin adhesive system(Beriplast) were taken in cases of alveolar bone resorption and mucosal shortening due to traumatized alveolar bone defects, senile atrophic alveolar bone, postoperative cyst or tumor resection, edentulous alveolar bone loss, and others. A technique in the use of small piece of palatal mucosa$(1{\times}20mm)$ from the lateral aspect of the palate with adhesive system provided to secure the skin grafts, avoid stent fixation, postoperative patient's comfort and less time-consuming than the standard technique, especially excellent bleeding control.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 2009

Tube hydroforming provides a number of advantages over the conventional stamping process, including fewer secondary operations, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. A hydroformed vehicle body component has an attachment flange or the like-formed as an integral part of the hydroforming process. For a given flange shape, a parting plane for the dies is established relative to which the various surfaces of the flange shape, in cross section, have no significant reverse curvature. This study shows analysis results that form the flanged tubular parts in the hydroforming. The thickness variations and defects during the hydroforming for flange forming could be analyzed by FE analysis. FE analysis was performed by LS-DYNA/Dynaform 5.5.

• 한국전문물리치료학회지
• /
• 제6권1호
• /
• pp.62-73
• /
• 1999

The purpose of this article was to provide basic knowledge and treatment principles of patient with lymphedema, which was usually not treated at all, or the treatment given didn't work efficiently. Lmphedema is defined as an abnormal accumulation of protein-rich fluid, edema, and chronic inflammation within an extremity. Lmphedema may be classified as either primary results from defects with aplasia, hypoplasia, and hyperplasia in the lymphatic system at birth or secondary is caused by known precipitating factors such as cancer, infection, inflammation, radiation, surgery, or trauma etc. There are essentially several conservative treatment methods which has been utilized successfully to treat lymphedema in Samsung Medical Center. We used following procedures: CPT (Complex Physical therapy) or CDP (Complex Decongesitive Physical therapy) such as skin care, MLD (Manual Lymph Drainage), compression with short-stretch bandage, exercise, elevation, elastic stocking, and pneumatic compression. Our experiences shows that conservative treatments can significantly reduce lymphedema and prevent different complications.

• 한국결정학회지
• /
• 제12권1호
• /
• pp.5-9
• /
• 2001

Nd/sub 0.05/Y/sub 0.95/Ca₄O(BO₃)₃(Nd:YCOB) single crystals were grown by the Czochralski method using a iridium crucible under N₂ atmosphere. Optimum growth parameters to get high quality of single crystals were 1.5∼2 mm/hr of growth rate and 10∼20 rpm of rotation rate. The grown crystals were transparent with light purple color and well-developed in cleavage planes. The crystal structure of Nd;YCOB were identified to monoclinic by XRD method. Crystal defects acting as light scattering centers, such as micro-pores, secondary phases, inclusions and cracks were not observed under the He-Ne laser illuminations. Three red, green, blue laser devices for the RGB laser oscillations were designed and then fabricated from the grown Nd:YCOB crystals according to the phase-matching angles of negative type-I which were φ=16.40°, 33.95° and θ=22.59° with the flatness of λ/6 at least, respectively.

• 열처리공학회지
• /
• 제5권4호
• /
• pp.233-239
• /
• 1992

A study of the precipitation process of Al-Li binary alloy at low ageing temperature has been carried by electrical resistivity measurement. Two types of G.P.zones were formed during ageing at low temperature. G.P. (1) zone and G.P. (2) zone have been formed primarily at ageing temperature below $60^{\circ}C$ and at ageing temperature range of $80^{\circ}C$ to $100^{\circ}C$, respectively. Therefore the precipitation process of Al-Li binary alloy was as follows; G.P.(1) zone ${\rightarrow}$ G.P.(2) zone ${\rightarrow}{\delta}^{\prime}{\rightarrow}{\delta}$ G.P. (1) zone might be affected by excess vacancies, but G.P. (2) zone might be affected by secondary defects. clusters and Li-vacancy pairs. The activation energy for formation of G.P. (2) zone is 0.87eV. It is lower than that of Al-Cu alloy.

• 한국임상수의학회:학술대회논문집
• /
• 한국임상수의학회 2009년도 춘계학술대회
• /
• pp.137-150
• /
• 2009

Background: Heart failure can develop secondary to various heart diseases (e.g. mitral valvular insufficiency, congenital heart defects, heart worm infection). The clinical signs of heart failure can be confused with those of other conditions, such as respiratory disease. Therefore, specific, sensitive, rapid and inexpensive blood tests for heart failure are desirable. Cardiac troponins, natriuretic peptides and cytokines have been more recently used as indicators of heart disease in humans and animals. These peptides are sensitive to changes in vasoconstriction and dilation within the heart and are used for the diagnosis and prognosis of heart failure. Methods: Previously developed and newly developed cardiac biomarkers will be discussed for understating clinical implications and diagnostic values in heart diseases in small animals

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.88-91
• /
• 2011

Steam generator tubes (SGTs) in nuclear power plants (NPPs) are a boundary between the primary side generating heat by nuclear fission and the secondary side generating electric power by a turbine. The water inside the SGT is high temperature and high pressure. Therefore, defects and magnetic phases (MPs) are partly produced in non-magnetic SGT by high stresses and temperatures. This causes trouble regarding the safety of SGTs but it is difficult to detect the MP using the conventional eddy current technique (ECT). In particular, a circumferential defect (CD) and circumferential magnetic phase (CMP) cannot detected by ECT. Consequently, a new method is needed to detect CDs and CMPs in SGT. A new U-type yoke with two types of coils was designed and the reactance signal by the CMPs and CDs in the SGT material was simulated.