• 설비공학논문집
• /
• 제9권2호
• /
• pp.239-248
• /
• 1997

Steady components and unsteady components of second-order velocity and temperature within pulse tube refrigerators were obtained. Second-order solutions were obtained from the first-order solutions of continuity, momentum and energy equations, assuming that the amplitude of the piston motion is small. The axial temperature gradient was considered in the analysis. The flow direction of the streaming was consistent with previous experimental observations. Effects of axial temperature gradient on secondary flow and second-order temperature were shown.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권2호
• /
• pp.69-76
• /
• 2001

Unsteady components of the second-order axial velocity and temperature within a tapered pulse tube were obtained by using a novel hybrid method of solution which combines an analytical solution with a numerical solution. The effects of operating frequency, taper angle and cold eng temperature on the unsteady components of the second-order axial velocity and temperature were shown. The unsteady component of the second-order mass flux had the amplitude of the same order as the steady component when the velocities at the ends of the pulse tube have only first-order components.

• Korea-Australia Rheology Journal
• /
• 제19권4호
• /
• pp.201-209
• /
• 2007

The present paper is concerned with non-isothermal spherical Couette flow of Oldroyd-B fluid in the annular region between two concentric spheres. The inner sphere rotates with a uniform angular velocity while the outer sphere is kept at rest. Moreover, the two spherical boundaries are maintained at fixed temperature values. Hence, the fluid is effect by two heat sources; namely, the viscous heating and the temperature gradient between the two spheres. The viscoelasticity of the fluid is assumed to dominate the inertia such that the latter can be neglected. An approximate analytical solution of the energy and momentum equations is obtained through the expansion of the dynamical fields in power series of Nahme number. The analysis show that, the temperature variation due to the external source appears in the zero order solution and its effect extends to the fluid velocity distribution up to present second order. Viscous heating contributes in the first and second order solutions. In contrast to isothermal case, a first order axial velocity and a second order stream function fields has been appeared. Moreover, at higher orders the temperature distribution depends on the gap width between the two spheres. Finally, there exist a thermal distribution of positive and negative values depend on their positions in the domain region between the two spheres.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.282-290
• /
• 2008

The malting process of rice (OM4080 variety from Mekong Delta Rice Research Institute) was studied under pilot condition plan by means of the second-order experimental design. Processing parameters, such as the steeping time (0-60 hrs), steeping temperature ($5-45^{\circ}C$), germination time (0-8 days), germination temperature ($5-45^{\circ}C$) and gibberellin concentration (0-2 mg/kg) were investigated. As a result, all germination conditions, especially germination time, germination temperature, and gibberellin concentration had a significant effect on the malting loss, amylase activity and starch content. The protein content was not clearly affected by any conditions. The optimum conditions for malting process (with highest amylase activity) were as follows: 30 hrs of steeping time, $30-35^{\circ}C$ of steeping temperature, 5-5.5 days of germination time, $25^{\circ}C$ of germination temperature, and 1.5 mg/kg of giberrellin concentration.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.35-41
• /
• 2001

A second-order conditional moment closure(CMC) model is applied to the prediction of local extinction in a turbulent hydrocarbon diffusion flame and compared with direct numerical simulation(DNS) results for the flame. Combustion of a hydrocarbon fuel is described by a simple two-step mechanism. A second-order correction for conditional mean reaction rate terms is made by the assumed pdf method. The results show that the second-order closure is necessary for accurate prediction of intermediate species, while first-order CMC gives good predictions for fuel, oxidant, product and temperature. Conditional variances and covariances are well predicted during an extinction process while they are overpredicted during a reignition process.

• 한국화재소방학회논문지
• /
• 제17권1호
• /
• pp.26-32
• /
• 2003

Halon대체 소화제로 쓰이는 불활성 기체 중 Ar, $N_2$, $CO_2$의 단일 성분일 때의 물성(포화압력, 밀도, 점도)에 관한 실험식을 구하였다. 문헌에서 얻은 실험 값을 이용하여 다항식 등의 회귀분석에 의해서 실험식을 얻었다. 포화압력은 온도에 대하여 각각 2차와 3차의 실험식으로 표시하였다. 밀도는 Ar, $N_2$는 온도에 대한 1차 함수로 표시하였고, $CO_2$는 온도에 대하여 각각 2차와 3차의 실험식으로 표시하였다. 점도는 온도에 대한 지수함수로 표시하였다. 이들 실험식을 이용하여 단일 성분일 때의 상태를 알 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.121-133
• /
• 1989

In order to compare the accessory canal filling effects of the three root canal filling methods with gutta-percha, the author fabricated artificial root canal mold with the first and second accessory canals of chrome-cobalt alloy. After the artificial root canal was filled with gutta-percha by lateral condensation, vertical condensation and low-temperature thermoplasticized gutta-percha injection-molded method, twenty five times respectively, the gutta-percha forced into the first and second accessory canals were measured with caliper for length. The results were as follows: 1. The filling in both accessory canals was most effective in low-temperature thermoplasticized gutta-percha injection-melded method followed in such order as: vertical condensation method and lateral condensation method (p < 0.01). 2. The filling effect of the second accessory canal was more or less higher than that of the first one (p < 0.05). 3. Low-temperature thermoplasticized gutta-percha injection-molded method was fastest in time needed for root canal filling followed by lateral condensation method and vertical condensation method.

• 한국수자원학회논문집
• /
• 제31권2호
• /
• pp.145-153
• /
• 1998

이 논문에서는 Washita '92 자료를 이용하여 토양수분의 1차원 및 2차원 통계특성을 추출하였다. 아울러, 토양수분과 토양, 밝기온도(brightness temperature), 식생지수 사이의 상관관계가 어떤지를 선형회귀분석에 근거하여 조사해 보았으며 결과로서 토양수분은 밝기온도와 유의할만한 상관성이 있는 것으로 나타났다. 토양수분의 시간에 대한 감쇠(decay)계수를 각각의 토양군별로 추정하였고, 역으로 이 값을 이용하여 관측전 마지막 강우의 시점을 추정해 본 결과 관측기록과 유사한 20일 정도로 나타났다. 토양수분의 2차원 통계특성 분석은 2차원 상관도와 스페트럼을 도출하고 분석함으로서 수행하였으며 토양과 식생지수에 대한 2차원 분석결과와 비교하였다. 이러한 분석 결과로 토양수분은 공간적으로 매우 높은 상관성을 갖는 토양과 상대적으로 낮은 사오간성을 보이는 식생의 중간적인 2차원 통계특성을 나타냄을 알 수 있었다. 즉, 지형이 완만하여 지형적인 영향이 상대적으로 적다고 알려진 Washita 지역의 경우 공간적으로 높은 상관성을 보이는 토양의 공극에 존재하는 토양수분은 상대적으로 낮은 상관성을 보이는 식생에 의해 교란되고 있음을 파악할 수 있었다. 선형저수지의 개념과 공간적인 확산을 고려한 동역학적 토양수분 모형의 유도과정을 보였고 모형의 매개변수가 토양수분의 1차원 및 2차원 통계특성으로부터 효과적으로 추정될 수 있음을 보였다.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.120-127
• /
• 2009

An electric furnace, inside which desired temperatures are kept constant by generating heat, is known to be a difficult system to control and model exactly because system parameters and response delay time vary as the temperature and position are changed. In this study the heating system of ceramic drying furnaces with time-varying parameters is mathematically modeled as a second order system and control parameters are estimated by using a RIV (Recursive Instrumental-Variable) method. A modified bang-bang control with magnitude tuning is proposed in the time optimal temperature control of ceramic drying electric furnaces and its performance is experimentally verified. It is proven that temperature tracking of adaptive time optimal control using a second order model is more stable than the GPCEW (Generalized Predictive Control with Exponential Weight) and rapidly settles down by pre-estimation of the system parameters.

• 한국화재소방학회논문지
• /
• 제16권2호
• /
• pp.51-58
• /
• 2002

몬트리올 의정서에 의해서 규제받는 Halon-1301과 대체 물질중의 하나인 $CO_2$의 물성(밀도, 점도, 엔탈피)의 실험식을 구하였다. 문헌에서 얻은 실험값을 이용하여 온도에 대한 회귀분석에 의해서 실험식을 얻었다. 압축인자를 이용하여 온도에 대한 2차 함수로서 밀도에 관한 실험식을 제안하였다. 점도는 온도에 대한 지수함수로 표시되며, 보정인자를 사용하여 사용 온도범위를 확장하였다. 엔탈피는 열용량과 마찬가지로 온도에 대한 2차 함수로 정의하여 나타내었다. 본 연구에서 제안된 위의 실험식의 상관계수는 0.99 이상이었다.