• 대한전자공학회논문지
• /
• 제25권4호
• /
• pp.422-429
• /
• 1988

The photoconductive multilayer of Se-As(hole blocking layer)/Se-As-Te (photoconductive layer) /Se-As (layer for supporiting hole transport)/Se-As(layer or controlling total capacitance)/Sb2S3(electron blocking layer) was fabricated and its electrical and optical properties were investigated. The photoconductive multilayer is made of evaporated a-Se as the base material, doped with As and Te to prevent the crystallization of a-Se and to enhance red sensitivity, respectively. The multilayer with good image reproducibility has the following deposition condition. The first layer has the thickness of 250\ulcornerat the deposition rate of 250\ulcornersec. The second layer has the thickness of 800\ulcornerat the deposition rate of 250\ulcornersec. The third layer has the thickness of 125\ulcornerat the deposition rate of 250\ulcornersec. The fourth layer has the thickness of 1700\ulcornerunder the Ar gas ambient of 50x10**-3torr. The image pick-up tube, employing this multilayer demonstrates the following characteristics. The photosensitivity is 0.8, the resolution limit is above 300TV line, and the decay lag is about 7%. And spectral response convers the whole visible range. Therfore the application to color TV camera is expected.

• 천문학회보
• /
• 제36권2호
• /
• pp.90.1-90.1
• /
• 2011

We are developing empirical space weather (geomagnetic storms, solar proton events, and solar flares) forecast models based on solar information. These models have been set up with the concept of probabilistic forecast using historical events. Major findings can be summarized as follows. First, we present a concept of storm probability map depending on CME parameters (speed and location). Second, we suggested a new geoeffective CME parameter, earthward direction parameter, directly observable from coronagraph observations, and demonstrated its importance in terms of the forecast of geomagnetic storms. Third, the importance of solar magnetic field orientation for storm occurrence was examined. Fourth, the relationship among coronal hole-CIR-storm relationship has been investigated, Fifth, the CIR forecast based on coronal hole information is possible but the storm forecast is challenging. Sixth, a new solar proton event (flux, strength, and rise time) forecast method depending on flare parameters (flare strength, duration, and longitude) as well as CME parameter (speed, angular width, and longitude) has been suggested. Seventh, we are examining the rates and probability of solar flares depending on sunspot McIntosh classification and its area change (as a proxy of flux change). Our results show that flux emergence greatly enhances the flare probability, about two times for flare productive sunspot regions.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1358-1362
• /
• 2007

The structures, energetics and transfer integrals of the acene tetramers up to pentacene are investigated with the ab initio molecular orbital method at the level of second-order Møller-Plesset perturbation theory (MP2). Calculated geometries for the herringbone-style structures found in the crystal structure were characterized as local minima, however the geometrical discrepancy between crystal and MP2 theoretical structure is reasonably small. The binding energy of pentacene tetramer was calculated up to 40 kcal/mol (MP2/6-31G(d)) and about 90 kcal/mol (MP2/aug-cc-pVDZ), and the latter seems to be too much overestimated. The tendency of the hole transfer integrals computed with ab initio MP2/3-21G(d) geometry is well agreement with those estimated with crystal structure with some discrepancy, and the gradual increment of the transfer integrals at the crystal geometry is attributed to mainly packing structure rather than the intrinsic property of acene such as a size of acene.

• 한국통신학회논문지
• /
• 제25권9B호
• /
• pp.1635-1640
• /
• 2000

본 논문에서는 기본파를 억제시키고 2차 고조파가 주 발진신호로 동작되는 18GHz 대역의 push-push 발진기를 semi-MMIC 형태로 설계 및 제작하였다. 마이크로스트립 선로를 포함하는 passive component는 semi-insulating GaAs 기판위에 MMIC 공정을 이용하여 구현하고, Chip 형태의 P-HEMT, 저항, 캐패시터를 Au wire-bonding에의해 연결하였으며, via-hole 대신 접지면을 회로 주변에 구성하여, back-side와 wire-bonding하였다. 실험 결과 -10.5 dBm의 출력 전력 특성을 얻었으며, 기본 주파수 억압은 -17.3 dBc/Hz의 특성을 보였다. 위상 잡음은 100kHz offset에서 -97.7 dBc/Hz를 얻었다.

• 대한두개안면성형외과학회지
• /
• 제16권1호
• /
• pp.29-30
• /
• 2015

In cleft palate surgery, the environment is especially critical when suturing. Encum-bered, obstructive space in the environment can hinder a suture while using the Dingman mouth gag. We introduced a novel but simple draping technique. A simple hand towel is placed over the gag. A hole is cut out in the middle according to each patient's mouth. After making the hole, the hand towel is soaked in water and gently squeezed. Then the towel is properly placed over the Dingman mouth gag. Dripping water on the hand towel during the suture helps keep it in place. Using this draping technique, we cut 14 minutes of operation time compared to the average operation time of the past 2 years. There were several disadvantages in previous draping method. First, long suture material may easily get caught. Second, the operation field can easily be contaminated. Third, focusing on the operation becomes difficult due to the obstruction. This draping technique can compensate for the disadvantages of the previous Dingman mouth gag.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1136-1137
• /
• 2015

The accelerated thermal aging of chlorosulfonated polyethylene (CSPE) was performed for 0 days, 80.82 days, and 161.63 days at $100^{\circ}C$, which is equivalent to 0y, 40y, and 80y of aging, respectively, at $50^{\circ}C$. The volume electrical resistivity of dried CSPE for 570~630 days after seawater and freshwater soaking, are $1.109{\times}10^{14}{\Omega}{\cdot}cm$, $8.546{\times}10^{13}{\Omega}{\cdot}cm$ and $8.466{\times}10^{13}{\Omega}{\cdot}cm$. The applied voltage rising time of 11~12 second and dielectric breakdown time of 9~11 second of the accelerated thermal aged CSPE is shorter than those of 12~13 and 11~13 second of the non-accelerated thermal aged CSPE, respectively. It is shown that oxidation, fragment and crack are formated at hole of dielectric breakdown in CSPE. The apparent density of dried CSPE for 750 days are $1.555g/cm^3$, $1.595g/cm^3$ 및 $1.597g/cm^3$ according to accelerated thermal aging year, respectively.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.118-124
• /
• 2016

In this study, experiments are conducted to improve spray coating uniformity by using second and third electrodes based on the electrospray atomization mechanism. The uniformity of fabricated thin films can be improved by adjusting the design of the second electrode. The implementation of the second electrode with an elongated hole and a bending angle of $90^{\circ}$ results in highly uniform films. In addition, induced area to substrate is increased by lowering the applied voltage using the third electrode with a round rod shape. A linear correlation between applied voltage and induced area is confirmed. Thin film thickness and surface roughness are measured after the fabrication of thin films through the electrospray process. It is confirmed that a thin film is formed having an average thickness of 273.44 nm, a thickness uniformity of less than 10%, and a surface roughness of 3 nm.

• 지능정보연구
• /
• 제22권4호
• /
• pp.87-107
• /
• 2016

융합을 통한 기술과 제품의 혁신을 이해하는 것은 중소기업의 생존을 위한 필수가 되었다. 특히, 이종 산업간 융합을 통한 제품 혁신과 성공을 위해서는 융합 가능한 아이템 즉, 제품과 기술, 아이디어를 탐색하고 대안을 찾는 것이 중요하다. 기존의 융합연구는 크게 두 가지의 한계를 갖는다. 첫째, 특허와 논문 등 기술정보를 기반으로 하는 기술융합 발굴은 시장의 수요를 인식하는데 한계가 있다. 본 논문은 중소 창업기업에 적용할 수 있는 시장융합(Market convergence)의 관점에서 새로운 융합 기회를 식별하려고 시도하였다. 이를 위해 세계 중소 수출입 기업이 이용하는 글로벌 B2B e-마켓플레이스의 제품 데이터베이스를 활용하였다. 둘째, 기존의 융합기회 발굴 연구는 이미 융합되어 존재하는 제품 또는 기술 기반의 연관성 및 관계를 파악하는데 집중하였다. 본 연구에서는 융합 가능한 새로운 사업기회의 발굴을 목적으로 구조적공백(Structural Hole) 이론을 적용하여, 상이한 산업군에서 서로 직접적인 연결 관계가 없는 키워드 간의 네트워크를 분석하여 융합의 가능성이 있는 새로운 융합 사업 테마를 도출하고자 한다. 이를 위해 제품명과 제품 기술서를 기반으로 제품 및 기술 용어 사전과 텍스트마이닝 을 활용하여 제품과 서비스의 특성을 추출하고, 이들 특성간 연관관계분석을 수행한 후, 네트워크 분석을 진행 하였다. 실험 데이터는 시장의 최신 동향을 파악하기 위해 2013년 1월 부터 2016년 7월까지 등록된 24만건의 e-카탈로그를 대상으로 하였으며, 분석의 효율성을 높이기 위해 기술 범위를 IT로 제한하고, IT 기술을 매개로 한 "Health & Medical"과 "Security & Protection" 카테고리 간의 융합 기회를 도출 하였다. 실험을 통하여 융합연관규칙 1,729을 추출하였으며, 지지도를 기반으로 100개의 규칙을 샘플링 하여, 구조적 공백을 분석하였다.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2005

The HANARO, a multi-purpose research reactor of 30 MWth, open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. The HANARO is composed af inlet plenum, grid plate, core channel with flow tubes and chimney. The reactor core channel is located at about twelve meters (12 m) depth of the reactor pool and cooled by the upward flow that the coolant enters the lower inlet of the plenum, rises up through the grid plate and the core channel and comes out from the outlet of chimney. A fission moly guide tube is extended from the reactor core to the top of the reactor chimney for easily loading a fission moly target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube by jet flow. This paper describes an analytical analysis that is the study of the flow behavior through the guide tube under reactor normal operation and unloading the target. As results, it was conformed through the analysis results that the flow rate, reduced to about fourteen kilogram per second (14 kg/s) from the original flow rate of sixteen point three kilogram per second (16.3 kg/s) did not show the guide tube jet.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.8-13
• /
• 2020

Seamless pipes are fabricated by drilling a hole in a cylindrical material and drawing the material to the desired diameter. These pipes are used in environments where high reliability is required. In this study, the pipe drawing process was simulated using DEFORM, a commercial finite element method (FEM) analysis program. The outer diameter of the steel cylinder used herein before drawing was 70 mm, and the target outer diameter was 58 mm. The drawing process consisted of two stages. In this study, the effect of cross-sectional reduction rate on the pipe was investigated by varying the cross-sectional reduction rate in each step to achieve the target outer diameter. The results of this study showed that the first section reduction rate of 26% and the second section reduction rate of 13.9% caused the lowest damage to the material. Moreover, the FEM simulation results confirmed the influence of the drawing die angle on the pipe drawing process. The drawing die angles of 15° in the first step and 9° in the second step caused the least damage to the material.