• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.217-223
• /
• 2008

In this study, a garlic clove planter which is capable of planting holes in soil and planting a clove at the same time was designed and tested for film mulched beds. Planting characteristics of the planter were measured through field experiment. Some characteristics were analyzed with multibody dynamic simulation software. Simulation was performed on opening time of the planting hopper. Measured characteristics were position, angle, and reposition amount of garlic in sowing hole. Experiment results showed that the planted position of garlic in planting was 23.0 mm from the hole wall. The reposition amount of garlic was varied with its position and angle when the planted garlic was pressed by an angled compaction wheel. In case of type II position, the position movement of garlic was larger than type I. Average position movement of type II was 11.5 mm at $20^{\circ}$ of compaction wheel angle. These data suggest that cutting diameter of film opening must be larger than 33 mm to provide enough space for garlic sprouting. Also, simulation results showed that the maximum opening time of the planting hopper was 0.26 second.

• 지식경영연구
• /
• 제13권4호
• /
• pp.71-82
• /
• 2012

The purpose of this study is to investigate the effects of employees who attend graduate school on the expansion of the knowledge sharing network in their company. For this purpose, the researchers chose 10 worker-graduate students and 75 members of company 'A' that they belong to and 107 members of university 'B' that they belong to, 172 members in total. 10 overlapped employee-students were excluded. The results of this study are summarized as follow: First, the personal relations of the employee-students enhanced after they have entered the graduate school. The score for the question was 3.85 out of 5 points. Second, the employee-students played the role of the knowledge bridge between company's co-worker network and graduate school's classmate network. It was confirmed that the density of the company's network was higher than the density of the connected network of the company and the graduate school. The analysis result confirmed that the difference of the two groups was significant. This means that the company carried out exchange with more members and therefore gained various kinds of knowledge. Also, in all types of network, the structural hole of the company network was lower than that of the connected network of the company and graduate school. The ANOVA test using QAP procedure confirmed that the difference of two groups was significant (friendship network F=1.2856, p<0.05; information network F=1.278, p<0.05; and trust network F=1.23, p<0.05). It means that the company not only gained the newly acquired knowledge by the knowledge bridge of the employee-students, but also was able to share it more effectively with members. Third and lastly, the employee-students share various information related to the organization, duties and roles rest in the company throughout break time, working hours and direct inquiries. This means that the employee-students contributed to the innovation of knowledge sharing in the company by sharing knowledge that they gained from the graduate school within the company.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.286-289
• /
• 2001

Single phase CuGaS$_2$ thin film with the highest diffraction peak of (112) at diffraction angle (2$\theta$) of 28.8$^{\circ}$ was made at substrate temperature of 7$0^{\circ}C$, annealing temperature of 35$0^{\circ}C$ and annealing time of 60 min. And second highest (204) peak was shown at diffraction angle (2$\theta$) of 49.1$^{\circ}$. Lattice constant of a and c of that CuGaS$_2$ thin film was 5.37 $\AA$ and 10.54 $\AA$ respectively. The greatest grain size of the thin film was about 1${\mu}{\textrm}{m}$. The (112) peak of single phase of CuGaS$_2$ thin film at annealing temperature of 35$0^{\circ}C$ with excess S supply was appeared with a little higher about 10 % than that of no exces S supply And the resistivity, mobility and hole density at room temperature of p-type CuGaS$_2$ thin film with best crystalline was 1.4 $\Omega$cm, 15 cm2/V . sec and 2.9$\times$10$^{17}$ cm$^{-3}$ respectively. It was known that carrier concentration had considerable effect than mobility on variety of resistivity of the fabricated CuGaS$_2$ thin film, and the polycrystalline CuGaS$_2$ thin films were made at these conditions were all p-type.

• Journal of the Optical Society of Korea
• /
• 제20권2호
• /
• pp.269-275
• /
• 2016

This study has investigated the feasibility of 980-nm low-energy pulsed near-infrared laser stimulation to evoke auditory responses, as well as the effects of radiant exposure and pulse duration on auditory responses. In the experiments, a hole was drilled in the basal turn of the cochlea in guinea pigs. An optical fiber with a 980-nm pulsed infrared laser was inserted into the hole, orientating the spiral ganglion cells in the cochlea. To model deafness, the tympanic membrane was mechanically damaged. Acoustically evoked compound action potentials (ACAPs) were recorded before and after deafness, and optically evoked compound action potentials (OCAPs) were recorded after deafness. Similar spatial selectivity between optical and acoustical stimulation was found. In addition, OCAP amplitudes increased with radiant exposure, indicating a photothermal mechanism induced by optical stimulation. Furthermore, at a fixed radiant exposure, OCAP amplitudes decreased as pulse duration increased, suggesting that optical stimulation might be governed by the time duration over which the energy is delivered. Thus, the current experiments have demonstrated that a 980-nm pulsed near-infrared laser with low energy can evoke auditory neural responses similar to those evoked by acoustical stimulation. This approach could be used to develop optical cochlear implants.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.269-278
• /
• 2017

Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

• 한국멀티미디어학회논문지
• /
• 제9권9호
• /
• pp.1139-1149
• /
• 2006

본 논문은 낮은 피사계 심도 영상(low depth-of-field image)에 대해 사용자의 도움 없이 포커스 된 관심 영역을 고속으로 추출하는 효율적인 방법을 제안한다. 우리는 입력 영상에 존재하는 고주파 성분을 HOS(higher order statistics) 계산을 함으로써 영상의 포커스 된 영역을 찾아내는 중요한 지표로 활용한다. 본 논문에서 제안하는 방법은 크게 4가지 단계로 구분할 수 있다. 첫 번째 단계에서는 기존 연구[1] 방법과 동일하게 모든 화소에 관해 HOS 지도를 계산하고 블록화한다. 두 번째 단계에서는 블록화 된 HOS를 이용하여 포커스 된 물체가 존재하는 후보 관심 영역을 대략적으로 구한다. 이후 관심 영역 내부에 존재하는 구멍(hole)을 제거하기 위해 구멍(hole) 추적 및 제거 연산을 수행한다. 마지막으로 최종 관심 후보 영역에서 배경 부분의 화소만 제거하여 포커스 된 관심 물체만을 섬세하게 추출한다. 제안하는 방법은 기존 방법[1]에 비해 정지 영상에서 고속으로 관심 영역을 추출하므로 추후 알고리즘의 변형 없이 낮은 피사계 심도의 동영상에 확장 적용하여 관심 영역을 실시간으로 추출할 수 있다. 본 논문에서 제안하는 방법은 가상 현실(VR)이나 실감 방송, 비디오 인덱싱 시스템과 같은 여러 응용 분야에 효과적으로 적용될 수 있고, 이러한 유용성은 실험 결과를 통해 보였다.

• 한국의상디자인학회지
• /
• 제17권4호
• /
• pp.1-14
• /
• 2015

This study mainly analyzes that designing patterns of an adult women Jeogori that takes advantage of patterns from each textbooks and complements the disadvantages based on the analysis of data from the dress evaluation and comparison of materials. The modification of a size specification is needed for the standard body as an adjust of the length of Jogori between front and back, mediation for bust width between front and back, a movement for the based line of Sup and Godae. As a result, the suitable pattern according to the standard somatotype is as below. Jeogori Length of front is determined by the length of back which was measured from side neck point to bust point plus three centimeters, and give three and half centimeters more in front. This three and half centimeters is for the curved in front of your body due to the chest. Bust width of front and back have to show the differences of human body. Bust width of front is calculated as bust girth into quarters and add two centimeters. Bust width of back gives one centimeter behind the curve from the center line in order to reduce the floating phenomenon. So, the amount of center back line dart is one centimeter. Arm hole girth measures as dividing bust girth into four. Also, Goedae width has two methods to measure. First, divide bust girth into ten equal parts and subtract 0.5 centimeters from it. Second, measure neck girth and divide it by four. Sleeve length is equal to Hwajang minus bust width of front. Hand wrist calculates in using bust girth. Make bust girth into quarters and multiply three fifths. Side line measures as deducting from Jeogori length of back to Arm hole girth and multiply two thirds.

• 복식
• /
• 제60권10호
• /
• pp.163-179
• /
• 2010

False sleeves are 'the sleeves that are attached to clothes but exist just as a part without any function to put arms in them.' They are different from sleeves to put arms in them and are to follow the trend or a way of wearing clothes. They are mostly found in medieval Europe's decorative sleeves named 'Hanging sleeves', but they are also found in Eastern region, too. They are found in sleeves that attached women's headgear in East and Middle Asia, and also in high-class male caftan in Ottoman Turk in the 16th and 17th century. False sleeves can be divided into two kinds by shapes. The first ones are the decorative sleeves of which trunk-shaped sleeves hang around the whole or part of the arm hole but have no function to put arms in them; this is called as 'sleeve-shaped False sleeves'. These sleeves are found in women's headgear in medieval Europe, Ottoman Turk, and East and Middle Asia. False sleeves in Europe and Ottoman Turk played a role in showing wealth and power while those in East and Middle Asia had a great role in highlighting the costume's decorative effect. The second ones are the sleeves hanging down from the arms by attaching long cloth to the arm hole, in design; these are named as 'cape-shaped False sleeves.' This style is found only in medieval Europe, and presumably, these cape-shaped false sleeves may have played a role in boasting of one's wealth and power.

• Geomechanics and Engineering
• /
• 제18권4호
• /
• pp.449-457
• /
• 2019

Physical model tests were first performed to investigate the failure pattern of multiple pillar-roof support system. It was observed in the physical model tests, pillars were design with the same mechanical parameters in model #1, cracking occurred simultaneously in panel pillars and the roof above barrier pillars. When pillars 2 to 5 lost bearing capacity, collapse of the roof supported by those pillars occurred. Physical model #2 was design with a relatively weaker pillar (pillar 3) among six pillars. It was found that the whole pillar-roof system was divided into two independent systems by a roof crack, and two pillars collapse and roof subsidence events occurred during the loading process, the first failure event was induced by the pillars failure, and the second was caused by the roof crack. Then, for a multiple pillar-roof support system, three types of failure patterns were analysed based on the condition of pillar and roof. It can be concluded that any failure of a bearing component would cause a subsidence event. However, the barrier pillar could bear the transferred load during the stress redistribution process, mitigating the propagation of collapse or cutting the roof to insulate the collapse area. Importantly, some effective methods were suggested to decrease the risk of catastrophic collapse, and the deep-hole-blasting was employed to improve the stability of the pillar and roof support system in a room and pillar mine.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.17-22
• /
• 2009

Thermal stress and elastic creeping stress analysis was conducted by finite element method to simulate start-up process of a boiler header of 500MW standard fossil power plant. Start-up temperature and operating pressure history were simplified from the real field data and they were used for the thermal stress analysis. Two kinds of thermal stress analysis were considered. In the first case only temperature increase was considered and in the second case both of temperature and operating pressure histories were considered. In the first analysis peak stress was occurred during the temperature increase from the room temperature. Hence cracking or fracture may occur at the temperature far below the operating maximum temperature. In the results of the second analysis von Mises stress appeared to be higher after the second temperature increase. This is due to internal pressure increase not due to the thermal stress. When the stress components of radial(r), hoop($\theta$) and longitudinal(z) stress were investigated, compression hoop stress was occurred at inner surface of the stub tube when the temperature increased from room temperature to elevated temperature. Then it was changed to tension hoop stress and increased because of the operating pressure. It was expected that frequent start-up and shut-down operations could cause thermal fatigue damage and cracking at the stub tube hole in the header. Elastic-creeping analysis was also carried out to investigate the stress relaxation due to creep and stabilized stress after considerable elapsed time. The results could be used for assessing the creep damage and the residual life of the boiler header during the long-tenn service.