• 한국광학회지
• /
• 제5권1호
• /
• pp.74-79
• /
• 1994

이 연구에서는 TSSG 법으로 육성한 LiB3O5(LBO) 단결정의 1064nm 광에 대한 type I 및 type II 제 2 조화파 발생(SHG) 특성을 조사하였다. Type I SHG의 위상정합각은 $\theta_m=90^{\circ}, \phi_m=11.6^{\circ}$였고 angular acceptance bandwidth는 각각 $\delta\theta_{int}L_{1/2}=3.3^{\circ}-cm^{1/2}, \theta\phi_{int}L=0.27^{\circ}-cm^{1/2}$로 측정되었다. Type II SHG의 위상정합각은 $\theta_m=20^{\circ}, \phi_m=90^{\circ}$였고 angular acceptance bandwidth는 각각 $\delta\theta_{int}L_=0.65^{\circ}-cm, \theta\phi_{int}L^{1/2}=3.5^{\circ}-cm^{1/2}$로 측정되었다. Type I NCPM SHG 온도는 $149^{\circ}C$였고 temperature bandwidth $\DeltaTL$은 $4.8^{\circ}C-cm$였다. Nd:YAG 레이저의 peak power 가 $171 MW/\textrm{cm}^2$ 일때 두께가 2.6 mm 인 LBO 결정의 SHG 변환효율은 약 1.8%였고, 이차 비선형 계수 $d_{32}는 약 0.74\pm0.05 pm/V$로 측정되었다.

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.151-155
• /
• 2007

녹색 광 발진을 위해 조화용융조성의 MgO가 첨가된 $LiNbO_3$ 결정을 이용하여 준위상정합 2차 조화파 도파로 소자를 제작하였다. 도메인 반전을 위해 +Z면에 주기적인 전극 패턴을 형성하였으며, 외부전계의 균일한 인가를 위해 LiCl 전해 용액을 사용하여 도메인을 반전 시켰다. 선택적 화학식각을 통해, 약 $6.8{\mu}m$의 분극 반전 주기를 확인 할 수 있었으며, $7{\mu}m$ ridge 높이와 $3{\mu}m$의 slap높이를 갖는 폭 $5{\mu}m$의 PPMgLN ridge-type 도파로 소자의 비선형 특성을 측정하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.149-155
• /
• 1997

We have successfully grown colorless and transparent Rb-doped potassium niobate (KRN) single crystals using the top seeded solution growth(TSSG) technique. In our crystal growth experiments, the Rb doping concentrations within the melt range from 2-15 mol% relative to that of Nb$_2$O5. Atomic absorption measurements indicate that the Rb content in the KRN solid solution is rather low; the Rb segregation coefficient is found to be on the order of 0.05. It is believed that this is due to the relatively much larger Rb+ ionic radius compared to that of K+, rendering it more difficult for Rb to replace K in the KNbO$_3$(KN) host lattice. Preliminary single-pass second harmonic generation (SHG) experimental results indicate that there exists marginal improvement in the phase-matching temperature tolerance of KRN compared to that of pure Kn single crystals.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.494-497
• /
• 2002

The influence of isomeric state of doped azo dye on the $B_7$ phase of bent-shaped liquid crystal (LC) is studied. It was found that modulating the isomeric trans-cis state of azo dye can change the molecular arrangement of the bent-shaped LCs. To identify these phenomena the observations of microscopic texture, electro-optic response, second harmonic wave generation (SHG) and switching current were carried out..

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1690-1692
• /
• 1998

레이저가 산업 응용 전반에 걸쳐 아주 중요한 부분으로 자리잡고 있으며, 최근에 와서는 레이저 의료기기, 레이저 가공, 레이저 핵 융합 등과 같은 다수의 분야에 강력한 가시광이나 자외선 광을 필요로 하고 있다. 이에 본 실험실에서 보유한 다단메쉬 중첩 기술을 이용하여 각 중첩 메쉬에 같은 에너지를 인가했을 때의 레이저 출력과 녹색광 출력간의 상관관계와 다단메쉬에 따른 변환효율도 조사하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.215-218
• /
• 2001

A pulsed Nd:YAG laser is used widely for materials processing and medical instrument. It's very important to control the laser energy density in those fields using a pulsed Nd:YAG laser. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this paper, the alternating charge and discharge system was designed to adjust a pulse repetition rate. This system is controlled by microprocessor and allows to frequence an expensive condenser for high frequency to cheap one for low frequency. In addtion, The microcontroller monitors the flow of cooling water, short circuit, and miss firing and so on. We designed Nd:YAG laser firmware with smart microcontroller, and want to explain general matters about the firmware from now.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.306-313
• /
• 1998

To elucidate the liquid crystal(LC) molecules alignment mechanism, it is important to determine the molecular orientation of the rubbed polymer surface molecules that directly contact with LC molecules. In this work, the molecular orientation on a rubbed surface of polyimide (SE-3310, Nissan) film has been studied by polarized FTIR absorption spectroscopy. It has been found that molecular chain on the rubbed surface of polymide film are oriented along the rubbing direction and are tilted up on an average by 5.0$^{\circ}$. In the SHG(Second Harmonic Generation) measurement, the pretilt angle of molecular chain on the poylmide fim was 4.6$^{\circ}$ fro, the surface plane. And the pedit angle of liquid crystal (ZLI-2293, Merck) molecules measured by crystal rotation method was 5.4$^{\circ}$in the same rubbing condition.

• 한국재료학회지
• /
• 제11권3호
• /
• pp.207-214
• /
• 2001

실리카 유리는 매우 우수한 광도파 소재이지만 비선형 광특성이 거의 없다. 그러나 이런 실리카 유리에 금속 전극과 같은 차단전극을 이용하여 강한 전기장을 장시간 가하게 되면 공간 전하 분극이 발생하게 되고 이에 의해 비선형 광특성이 나타나게 된다는 것은 실험적으로 알려져 왔다. 본 연구에서는 전기분극 시 실리카 유리에서 나타나는 비선형 광특성의 경시적인 변화를 공간적인 위치와 시간에 따라 정확히 예측할 수 있는 수치해석적인 모델을 제시하고자 하였다. 이를 위해서 지금가지 실험들에서 실리카 유리의 비선형 광특성 발생의 원인으로 밝혀진 공간전하분극을 전기분극 기구의 전산모사를 통하여 규명하였다. 비정질 실리카를 전해질 용액과 같은 특성을 지니는 매질로 가정하고 전하운반체가 단지 $Na^{+}$ 밖에 없다는 가정 하에 유한 차분법 (finite difference method)을 이용하였다. 원래의 복잡한 함수들을 표준화 변수들을 이용하여 간단한 식으로 변환하여 $Na^{+}$의 농도와 전기장의 분포를 표준화된 시편의 길이와 인가된 전압의 세기만으로 구할 수 있도록 하였다.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.551-557
• /
• 2014

In this study, we demonstrated multimodal nonlinear optical (NLO) microscopy integrated simultaneously with two-photon excitation fluorescence (TPEF), second-harmonic generation (SHG), and coherent anti-Stokes Raman scattering (CARS) in order to obtain targeted cellular and label-free images in an immunofluorescence assay of the atherosclerotic aorta from apolipoprotein E-deficient mice. The multimodal NLO microscope used two laser systems: picosecond (ps) and femtosecond (fs) pulsed lasers. A pair of ps-pulsed lights served for CARS (817 nm and 1064 nm) and SHG (817 nm) images; light from the fs-pulsed laser with the center wavelength of 720 nm was incident into the sample to obtain autofluorescence and targeted molecular TPEF images for high efficiency of fluorescence intensity without cross-talk. For multicolor-targeted TPEF imaging, we stained smooth-muscle cells and macrophages with fluorescent dyes (Alexa Fluor 350 and Alexa Fluor 594) for an immunofluorescence assay. Each depth-sectioned image consisted of $512{\times}512$ pixels with a field of view of $250{\times}250{\mu}m^2$, a lateral resolution of $0.4{\mu}m$, and an axial resolution of $1.3{\mu}m$. We obtained composite multicolor images with conventional label-free NLO images and targeted TPEF images in atherosclerotic-plaque samples. Multicolor 3-D imaging of atherosclerotic-plaque structural and functional composition will be helpful for understanding the pathogenesis of cardiovascular disease.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.167-185
• /
• 1999

In the present paper, KLN crystals have been grown along <001>, <100> and <110> directions by the top seeded solution growth (TSSG) method from Li-richer melts with different compositions. The morphologies of KLN crystals grown along different directions have been studied, and the well-developed facets have been unambiguously indexed using X-ray goniometer and stereographic projection analysis. The growth mechanism and defects such as cracks and inclusions were discussed on the basis of observations of facets on the crystal-melt interfaces. The crystal compositions were determined by chemical analysis method. The structure and lattice constants of KLN crystals were determined and calculated on the basis of XRD data by using TREOR90 and PIRUM programs. The Curie temperature and optical absorption were determined by dielectric constant peak and spectrum measurements, respectively. The blue SHG characteristics of a KLN sample were also investigated using a pulsed dye laser. PACS: 42.70.M;81.10;81.10A;42.65.K.