• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• Journal of the Korean Geographical Society
• /
• v.40 no.4 s.109
• /
• pp.428-440
• /
• 2005

There is currently no agreement among archaeologists, environmental historians, and paleoecologists as to the relative significance of pre- and post-Conquest human impact on the environments of Highland Mexico. This paper presents the results of pollen, microscopic charcoal, dung fungal spore, isotope, and magnetic susceptibility analyses on ca. 4m sediment core. The coring site is Hoya Rincon de Parangueo, one of the seven maar lakes in the Valle do Santiago. Amaranthaceae pollen, one of important disturbance indicators and Zea mays pollen obviously indicate two periods of agricultural activities. The first period begins ca. 400 B.C. and ends ca. A.D. 850. The second begins around A.D. 1550 and continues to the present. During the first period, the degree of agricultural activities was related to periodical sunspot cycles and the most intense activities were present between ca. A.D. 150-ca. A.D. 400. The abrupt increase of $\delta^{18}O$ around 280cm may reflect that an important transition to a dry phase took place around A.D. 450. People probably stopped cultivating crops due to dry conditions prevailing since ca. A.D. 450. The second period, the post-Conquest, exhibits a dramatic increase of sporormiella, dung fungal spores resulted fron the introduction of cattle. Low Poaceae frequency and charcoal production and high $\delta^{13}C$ values, magnetic susceptibility, and organic contents all indicate the arrival of the Spanish. Most importantly, it seems that mesquite (Prosopis juliflora) could have benefits from declined fire frequencies caused by cattle grazing. The study area is now entirely dominated by woody plants like mesquite, which clearly demonstrates that serious vegetation change occurred in the study area.

• Asia pacific journal of information systems
• /
• v.22 no.4
• /
• pp.75-99
• /
• 2012

Innovation can come from inside or outside organizations. Recently, organizations have begun turning to external knowledge more often, through various forms of collective intelligence (CI) as collaborative platform to solve complex problems. Several factors facilitate this CI utilization phenomenon. First, with the rapid development of Internet and social media, numerous web applications have become available to millions of the Internet users over the past few decades. Web 2.0 and social media have become innovative web applications that provide an environment for human social interaction and collaboration. Second, the diffusion of simple and easy-to-use technologies that enable users to interact and design web applications without programming skills have led to vast, previously unknown amounts of user-generated content. Finally, the Internet has enabled communities to connect and collaborate, creating a virtual world of CI. In this study, web enabled CI is defined as a composed ability of individuals who are acting as a single cognitive unit to achieve common goals, think reasonably, solve problems, make decisions, carry out complex tasks, and develop creative ideas collectively through participation and collaboration on the web. Although CI plays a critical role in organizational innovation and collaboration, the dubious quality of CI is still problem that is difficult to solve. In general, the quality level of content collected from the crowd is lower than that from professionals. Thus, it is important to identify determinants of CI quality and to analyze the relationship between CI quality and its usefulness. However, there is a lack of empirical study on the quality factors of web-enabled CI. There exist a variety of web enabled CI sites such as Threadless, iStockphoto or InnoCentive, Wikipedia, and Youtube. One of the most successful forms of web-enabled CI is the Wikipedia online encyclopedia, accessible all over the world. Another one example is Naver KnowledgeiN, a typical and popular CI site offering question and answer (Q&A) services. It is necessary to study whether or not different types of CI have a different effect on CI quality and its usefulness. Thus, the purpose of this paper is to answer to following research questions: ${\bullet}$ What determinants are important to CI quality? ${\bullet}$ What is the relationship between CI quality factors and the usefulness of web-enabled CI? ${\bullet}$ Does CI type have a moderating effect on the relationship between CI quality, its determinants, and CI usefulness? Online survey using Google Docs with email and Kakao Talk was conducted for collecting data from Wikipedia and Naver KnowledgeiN users. A totoal of 490 valid responses were collected, where users of Wikipedia were 220 while users of Naver KnowledgeiN were 270. Expertise of contributors, community size, and diversity of contributors were identified as core determinants of perceived CI quality. Perceived CI quality has significantly influenced perceived CI usefulness from a user's perspective. For improving CI quality, it is believed that organizations should ensure proper crowd size, facilitate CI contributors' diversity and attract as many expert contributors as possible. Hypotheses that CI type plays a role of moderator were partially supported. First, the relationship between expertise of contributors and perceived CI quality was different according to CI type. The expertise of contributors played a more important role in CI quality in the case of Q&A services such as Knowledge iN compared to wiki services such as Wikipedia. This implies that Q&A service requires more expertise and experiences in particular areas rather than the case of Wiki service to improve service quality. Second, the relationship between community size and perceived CI quality was different according to CI type. The community size has a greater effect on CI quality in case of Wiki service than that of Q&A service. The number of contributors in Wikipeda is important because Wiki is an encyclopedia service which is edited and revised repeatedly from many contributors while the answer given in Naver Knowledge iN can not be corrected by others. Finally, CI quality has a greater effect on its usefulness in case of Wiki service rather than Q&A service. In this paper, we suggested implications for practitioners and theorists. Organizations offering services based on collective intelligence try to improve expertise of contributeros, to increase the number of contributors, and to facilitate participation of various contributors.

• Asia pacific journal of information systems
• /
• v.18 no.4
• /
• pp.105-130
• /
• 2008

Consumers of e-learning market differ from those of other markets in that they are replaced in a specific time scale. For example, e-learning contents aimed at highschool senior students cannot be consumed by a specific consumer over the designated period of time. Hence e-learning service providers need to attract new groups of students every year. Due to lack of information on products designed for continuously emerging consumers, the consumers face difficulties in making rational decisions in a short time period. Increased uncertainty of product purchase leads customers to herding behaviors to obtain information of the product from others and imitate them. Taking into consideration of these features of e-learning market, this study will focus on the online herding behavior in purchasing e-learning contents. There is no definite concept for e-learning. However, it is being discussed in a wide range of perspectives from educational engineering to management to e-business etc. Based upon the existing studies, we identify two main view-points regarding e-learning. The first defines e-learning as a concept that includes existing terminologies, such as CBT (Computer Based Training), WBT (Web Based Training), and IBT (Internet Based Training). In this view, e-learning utilizes IT in order to support professors and a part of or entire education systems. In the second perspective, e-learning is defined as the usage of Internet technology to deliver diverse intelligence and achievement enhancing solutions. In other words, only the educations that are done through the Internet and network can be classified as e-learning. We take the second definition of e-learning for our working definition. The main goal of this study is to investigate what factors affect consumer intention to purchase e-learning contents and to identify the differential impact of the factors between consumers with purchase experience and those without the experience. To accomplish the goal of this study, it focuses on herding behavior and perceived usefulness as antecedents to behavioral intention. The proposed research model in the study extends the Technology Acceptance Model by adding herding behavior and usability to take into account the unique characteristics of e-learning content market and e-learning systems use, respectively. The current study also includes consumer experience with e-learning content purchase because the previous experience is believed to affect purchasing intention when consumers buy experience goods or services. Previous studies on e-learning did not consider the characteristics of e-learning contents market and the differential impact of consumer experience on the relationship between the antecedents and behavioral intention, which is the target of this study. This study employs a survey method to empirically test the proposed research model. A survey questionnaire was developed and distributed to 629 informants. 528 responses were collected, which consist of potential customer group (n = 133) and experienced customer group (n = 395). The data were analyzed using PLS method, a structural equation modeling method. Overall, both herding behavior and perceived usefulness influence consumer intention to purchase e-learning contents. In detail, in the case of potential customer group, herding behavior has stronger effect on purchase intention than does perceived usefulness. However, in the case of shopping-experienced customer group, perceived usefulness has stronger effect than does herding behavior. In sum, the results of the analysis show that with regard to purchasing experience, perceived usefulness and herding behavior had differential effects upon the purchase of e-learning contents. As a follow-up analysis, the interaction effects of the number of purchase transaction and herding behavior/perceived usefulness on purchase intention were investigated. The results show that there are no interaction effects. This study contributes to the literature in a couple of ways. From a theoretical perspective, this study examined and showed evidence that the characteristics of e-learning market such as continuous renewal of consumers and thus high uncertainty and individual experiences are important factors to be considered when the purchase intention of e-learning content is studied. This study can be used as a basis for future studies on e-learning success. From a practical perspective, this study provides several important implications on what types of marketing strategies e-learning companies need to build. The bottom lines of these strategies include target group attraction, word-of-mouth management, enhancement of web site usability quality, etc. The limitations of this study are also discussed for future studies.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering. Inc., Troy, USA) and ANSYS (Swanson Analysis Systems. Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Viva dent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition. Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.59-72
• /
• 2000

In this study, the rate of bone formation and the pattern of bone to implant contact surface around HA coated implant and pure Ti implant inserted into the irradiated tibia of rabbit were compared. Sixteen mongrel mature male rabbits were used as experimental animal. Each rabbit received 15 Gy of irradiation. Four weeks after irradiation, two holes were prepared on the tibia of each rabbit for placement of HA coated type and pure Ti type implants. Prior to implant placement, one group received steroid irrigation and the control group was similarly irrigated with normal saline. This was immediately followed by placement of the two different types of implants. Postoperatively, tetracycline was injected intramuscularly for 3 days. For fluorescent labelling, 3 days of intramuscular alizarine red injection was given. 2 weeks before sacrifice, followed by intramuscular calcein green on the last 3 days before specimen collection. Each rabbit was sacrificed on the second, fourth, sixth and eighth week after the implantation. The specimens were observed by the light microscope and the fluorescent microscope. The results were as follows; 1. All implants inserted into the irradiated tibia of rabbit were free from clinical mobility and no signs of bony resorption were noted around the site of implant placement. 2. Under the light microscope, new bone formation proceeded faster around implants that received steroid irrigation compared to the control group irrigated with saline. Bone to implant contact surface was greater in the steroid irrigated group than the saline irrigated group. Therefore, better initial stabilization was observed in the group pretreated with steroid irrigation. 3. Under the light microscope. HA coated implants showed broader bone to implant contact surface than pure Ti implants, and HA coated implants had better bone healing pattern than pure Ti implants. 4. In the steroid pretreated group, acceleration of bone formation was demonstrated by fluorescent microscopy around the 2, 4 weeks group and the 6 weeks HA coated implant group. The difference in the rate of bone formation proved to be statistically significant(P<0.05). Faster bone formation was noted in the saline irrigated group in the 6 weeks pure Ti implants and 8 weeks group. The difference was not statistically significant(P<0.05). 5. For the rabbits that were sacrificed on the second and fourth week after the implant placements, the rates of bone formation around HA coated implants proceeded faster than those around pure Ti implants under the fluorescent microscopy. For the rabbits that were sacrificed on the sixth week after the implant placements, the rates of bone formation around pure Ti implants proceeded faster than those around HA coated implants under the fluorescent microscopy. But this result did not show statistical significance (P<0.05) For the rabbits that were sacrificed on the eighth week after the implant placements, the rates of bone formation around HA coated implants proceeded faster than those around pure Ti implants under the fluorescent microscopy. This result was statistically significant (P<0.05).

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.3
• /
• pp.1-12
• /
• 2019

A bridge is a structure constructed on water or in the air for convenient passage. Compared to other buildings, the building materials and structures of bridge required unique functions to cross the space. It depends on the productivity of the building, the level of science and technology, and the ecological environment of the building site. Also, it has important relationship with functions such as politics, military, economy, and life. Most of the academic research on bridges is focused on research in the field of bridge-building technology, so the study on the landscape aesthetics and history of bridges is lacking. Against this backdrop, the study will be valuable as a accumulation of both countries' understanding of bridge types, history and culture, as well as technical and aesthetic data, by analyzing the bridges located within the palaces of Korea and China. The research method is to analyze the bridge through field survey and literature analysis.. First, the bridges of royal palace of Korea and China are to be classified quantitatively as physical shapes, landscapes, and decorations by comparing the materials, forms, landscapes, and decorative culture of bridges. Second, characteristics, common points, and differences are extracted by classifying bridges of both countries. Also, the results are discussed based on the physical environment or cultural background. This would be worth cross-referencing in the building technology and aesthetics of the two countries. For the first important characteristics of result, main materials of Korean and Chinese palaces are stone. However, the bridge in China's royal palaces is also focused on wood. Second, in terms of form, the bridges in the royal gardens of Korea and China are all based on the beam bridge. However, the specific form, ratio, style of the beam bridge, and airspace of arched bridge are very different. Third, most of the connection methods are focused on the over bridge. It values the convergence with the surrounding landscape. Due to the difference in the area and location of water, the bridge in the Korean palace is more focused on the convergence of the surrounding buildings and plants, while the bridge in the Chinese palace is more concerned about the harmony of hydration. Fourth, the decoration places importance on the artistry and aesthetics of both the bridges in Korea and China. There is a difference in style in the same type of decoration due to culture.

• Journal of the Korean Society for information Management
• /
• v.38 no.3
• /
• pp.141-174
• /
• 2021

In this study, by examining the actual usage data of the university library website before and after COVID-19 outbreak, the usage behavior of users was analyzed, and the data before and after the virus outbreak was compared, so that university libraries can provide more efficient information services in a pandemic situation. We would like to suggest ways to improve it. In this study, the user traffic made on the website of University C was 'using Google Analytics', from January 2018 to December 2018 before the oneself of the COVID-19 virus and from January 2020 to 2020 after the outbreak of the virus. A comparative analysis was conducted until December. Web traffic variables were analyzed by classifying them into three characteristics: 'User information', 'Path', and 'Site behavior' based on metrics such as session, user, number of pageviews, number of pages per session time, and bounce rate. To summarize the study results, first, when compared with data from January 1 to January 20 before the oneself of COVID-19, users, new visitors, and sessions all increased compared to the previous year, and the number of sessions per user, number of pageviews, and number of pages per session, which showed an upward trend before the virus outbreak in 2020, increased significantly. Second, as social distancing was upgraded to the second stage, there was also a change in the use of university library websites. In 2020 and 2018, when the number os students was the lowest, the number of page views increased by 100,000 more in 2020 compared to 2018, and the number of pages per session also recorded10.46, which was about 2 more pages compared to 2018. The bounce rate also recorded 14.38 in 2018 and 2019, but decreased by 1 percentage point to 13.05 in 2020, which led to more active use of the website at a time when social distancing was raised.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.1
• /
• pp.70-82
• /
• 2021

The purpose of this study is to reveal the tendency of planting design through the analysis of the planting of designer's gardens in the Suncheon Bay National Garden and to derive implications for future garden planting designs. The results of the study are as follows: First, the results of the study show that the practice of tree-based planting is still valid. Large growing trees such as 'Pinus densiflrora', 'Celtis sinensis', 'Zelkova serrata', 'Machilus thunbergii', 'Pinus strobus' overwhelmed the size of the designer's garden(150 to 390㎡). Second, the selection of trees tended to be made considering the designer's intention and the decorative effects rather than by considering the physiological and ecological conditions of the site. Third, among the herbaceous, the rate of the planting of perennials was high. Fourth, the flowering period of planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, the frequency color of the planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, in terms of flower color frequency, the most common was the yellow-series, followed by red-series, blue-series Sixth, average height herbaceous plants(20~60cm) were planted the most(47.4%). Seventh, structural plants that determined the garden's framework depended on trees, and the focal plants mainly utilized were evergreen trees, and the midrange plants were the planted herbaceous plants. The implications derived from the above findings are as follows: First, to ensure the garden's quality and sustainability, the selection of trees should be carefully considered, not considering only the artist's intention but also taking into account the physical and ecological conditions. Second, herbaceous plants can be used in various ways― the garden's focal plants, midrange plants, and ground covers, so more active herbaceous planting needs to be considered. Third, in consideration of the winter landscape, herbaceous planting using characteristics, such as fruits and stems, as well as flower colors should be considered. Fourth, blue and black color herbaceous plants have a noticeable effect even in a small amount, so it is necessary to plant them actively. Fifth, for the design of herbaceous planting, where the individual property of plants can be expressed, the design method should be considered.