• Journal of the Korean GEO-environmental Society
• /
• v.2 no.1
• /
• pp.81-89
• /
• 2001

Soil-bentonite mixture is often used for barrier wall to prevent seawater intrusion. In this study, the effect of seawater on the permeability of soil-bentonite mixture is examined, and the effect of permeability change on the seawater intrusion is investigated. Seawater intrusion in coastal areas was modeled using a finite element method. Seawater intrusion in the seawater-contaminated zone was determined by considering the hydraulic conductivity changes using the residual flow procedure (RFP) in the simulation model. Steady state and unsteady state conditions with variations in ground water levels in an inland area were investigated. The interface between fresh water and seawater, found by the proposed method, was located lower at the seawater side and the level at the fresh water side is higher than those by conventional methods.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.99-104
• /
• 2004

A combination of drilling, geophysical well logging, and electrical soundings was performed to evaluate seawater intrusion in Baeksu-eup, Youngkwang-gun, Korea. The survey area extends for over 24 $km^2$. To delineate the extent of seawater intrusion, 60 vertical electrical soundings (VES) have been carried out. Twelve wells were also drilled for the collection of hydrogeological, geochemical, and geophysical well logging data, to delineate the degree and vertical extent of seawater intrusion. To map the spatial distribution of seawater in this coastal aquifer, geophysical data and hydrogeochemical results were used, and the relation between the resistivity of groundwater and equivalent NaCl concentration was found. Layer parameters derived from VES data, various in-situ physical properties from geophysical well logging, and the estimated equivalent NaCl concentration were very useful for quantitative evaluation of seawater intrusion. Our approach for evaluating seawater intrusion can be considered a valuable attempt at enhancing the use of geophysical data.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2017

Seawater intrusion was evaluated using electrical conductivity, chemical proxies, and oxygen isotopic compositions in coastal area. It seems that groundwater in the area where the electrical conductivity is over $3,000{\mu}S/cm$ is influenced by seawater. However, it is very difficult that seawater intrusion is distinguished from other contaminants using the electrical conductivity. The chemical proxies and oxygen and hydrogen isotopic compositions can quantitatively estimate seawater intrusion. However, these method is a costly disadvantage. Therefore, firstly, groundwater contamination by seawater intrusion was evaluated using electrical conductivity and then the additional chemical and isotopic analysis were conducted in areas where possibility of contamination by seawater intrusion is high. These systematic analytical method can reduce analytical cost to quantitatively evaluate influence of seawater intrusion on coastal groundwater and may improve efficiency of analytical method for seawater intrusion.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.59-67
• /
• 2002

As a parameter for hydrodynamic modeling to define the range of seawater intrusion, dispersivities are frequently determined from pre-experiments or theoretical studies because field experiments need a lot of time and expenses. If the dispersivities are inadequate for an aquifer, the numerical results may have some errors. We examined the validity of longitudinal dispersivities by comparing the ranges of seawater intrusion with numerical modeling, field data and apparent resistivity sections. In the numerical modeling the TDS distributions simulated by the Xu's longitudinal dispersivity are more similar to the values of TDS measured at monitoring wet]s and boreholes than those by the Neuman's longitudinal dispersivity. The ranges of seawater intrusion by numerical simulations using Xu's longitudinal dispersivity show that the contour line of 1000 ㎎/L. as TDS is located at 480 m from the coast in May, while at 390 m in July. The difference is originated from the shift of the interface between seawater and fresh water. It moved toward the coast in July because of the seasonal increase of hydraulic gradient according to rainfall. A contour line of 15 ohm-m was used to define the range of seawater intrusion in apparent resistivity sections. From this criterion on the interface between seawater and fresh water, the range of seawater intrusion is located at 450 m from the coast. This result is similar to the range of seawater intrusion simulated by the numerical modeling using Xu's dispersivity. Therefore the range of seawater intrusion shows the difference due to the dispersivities used for the hydrodynamic modeling and the dispersivity generated by the Xu's equation is considered more effective to decide the range of seawater intrusion in this study area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.557-565
• /
• 2015

Sea level rise due to global warming causes seawater intrusion into aquifers in coastal areas. Seawater intrusion vulnerability index was developed using PSR (Pressure, State, Response) model and analysis hierarchy process (AHP). Coastal regions in Korea, Gangwon-do Sokcho-si, Incheon-si Ganghwa-gun, Chungcheongnam-do Taean-gun, Jeollanam-do Yeosu-si, Jindo-gun were chosen and 14 indicators were selected by considering the humanities, economic, social, environmental aspects. Re-scaling method was used for the standardization of indices and questionnaire survey was performed to calculate weight values for each index. The results showed that Yeosu-si was selected as the most vulnerable region to seawater intrusion. The seawater intrusion index developed in this research can be used to analyze the vulnerable regions to seawater intrusion and to establish a policy to minimize the seawater intrusion problems in coastal regions.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.68-74
• /
• 2003

SHARP numerical model was used to estimate the interface, ranges and seasonal variations of seawater intrusion. The interface obtained from the SHARP model represented more sensitive to seasonal variations than that estimated from the monitoring wells. When TDS and groundwater velocity vector distributions generated by SUTRA simulations are compared to the interfaces obtained from SHARP simulation, the difference of the range on seawater intrusion is less than 50 m, and the range of seawater intrusion from seasonal variations has the difference of about 12 m. These differences are small for the numerical simulation of the coastal aquifer at regional scale. Therefore, the model with sharp interface is very useful to estimate the interface at this study site, where is regional aquifer system in the scale of seawater infusion. However the SHARP model have some limitations in simulating the range of seawater intrusion, when the hydrodynamic dispersion is significant for seawater intrusion at local aquifer system.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.148-154
• /
• 2002

Groundwater Dam is one of the reliable techniques to get huge amount of groundwater abstraction for municipal, agricultural, drinking, industrial water supply system. It can be a major technique to solve water shortage problems when it based on the sufficient watershed, proper topology, and adequate aquifer distribution and pollution control. It is suggested that the two consecutive underground wall in the coastal area to prevent seawater intrusion beneath a single wall.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.307-312
• /
• 2007

Seawater intrusion in estuarine regions is an important issue in protecting groundwater against salinity increase as well as in protecting construction materials against corrosion. For example, drain water ejected during accelerated consolidation for the improvement of soft ground can cause damages to farm land because the drain water from seawater intrusion zones contains salinity. In this study, we have employed correlation analysis between resistivity value and salinity of in situ pore water. The correlation analysis indicates that resistivity and salinity are in exponential relationship with good correlation. Therefore we suggest that rapid estimation of spatial distribution of NaCl is possible using resistivity data.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.114-120
• /
• 2006

The main purpose of this study is to apply spatial analysis using semivariograms to small-loop electromagnetic survey data to assess the extent of seawater intrusion in an experimental watershed. To indicate the extent of seawater intrusion over the study area, vertical electrical soundings at 33 points and electrical conductivity logging in two wells were conducted. From the correlation between resistivities obtained by inversion and the depth of the aquifer at the two wells, the region of seawater intrusion was identified and demonstrated by electrical conductivity logging results obtained over two years. To measure the variation of apparent conductivity with depth, an electromagnetic survey in six frequency bands was adopted. Apparent conductivity mapping with spatial analysis using semivariograms is an effective technique for identifying the region of seawater intrusion at shallow depth.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.71-85
• /
• 2011

Saltwater intrusion effects of coastal aquifers in Korea peninsula were analyzed through trend analysis with groundwater level, seawater level, seawater temperature, and electrical resistivity(EC) data sets. Groundwater level and EC data sets from 27 coastal regions were collected and analyzed. Groundwater level was stable for all the regions however EC data showed stable or changing trends (9 increasing, 10 stable, and 8 decreasing regions). Seawater temperature was collected and analyzed for 14 regions and they are increasing for most regions (12 increasing and 2 stable regions). Seawater level was also collected and analyzed for 24 regions and is rising for most regions (18 rising, 3 stable, and 3 falling regions). Especially, west cost regions have stronger increasing tendencies of seawater level, seawater temperature, and EC than eastern and southern coastal regions. Therefore the saltwater intrusion problem can be serious for west cost regions in Korea peninsula and it is necessary to establish a plan to minimize the damages from saltwater intrusion.