• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.7
• /
• pp.473-482
• /
• 2004

In this paper, a detection technique of initial rotor position at a standstill in Toroidal Switched Reluctance Motor(TSRM) with built-in interior central pole search coil is proposed. In case search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF is not exist at a standstill. In this paper, a new detection method of initial rotor position is suggested using interior central pole search coil. The simulation and experiment for the proposed method and their results support the validity of the proposed scheme by verifying the operation of a 6/4 TSRM using search coils.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.936-939
• /
• 2004

In this paper a comparison of the initial rotor position estimation methods by two type search coils for switched reluctance motor(SRM) is presented. The experimental results of the two methods show that the interior central pole search coil method has better performance than the exterior pole search coil method. The reason of the discrepancy in performance is described.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2005

This paper presents a comparison of rotor position estimation of a switched reluctance motor(SRM) with built-in search coils by three methods. The search coil EMFs are not generated in the SRM with built-in search coils at standstill. So an initial rotor position estimation method is needed. In this paper squared euclidean distance, fuzzy logic and neural network methods we proposed for the estimation of initial rotor position. The simulated results of the three methods are compared. The simulated result of the squared euclidean distance method, which has the best performance, is supported by the experimental result.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.926-930
• /
• 2004

This paper presents a comparison of the characteristics by two types of switched reluctance motor (SRM) drives using search coils, Exterior pole search coil and Interior central pole search coil, which are used for estimation of the rotor position. The advantages and disadvantages of the two types of drive methods are also described.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.537-545
• /
• 2002

This paper presents a new method of detecting rotor position in Toroidal Switched Reluctance Motor(TSRM). In this paper, low cost and robust characteristics of rotor position detection method are focused in order to compensate for disadvantage of existing sensors. Search coils wound around stator poles are used for detection of rotor position in TSRM. Rotor position detection is achieved through electromotive force patterns induced by time-varying flux linkage in the search coils and then adequate phase is excited for drive. The validity of the method is verified by experimental results.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.196-200
• /
• 2004

This paper presents a new method of detecting rotor position in Toroidal Switched Reluctance Motor(TSRM). In this paper, low cost and robust characteristics of rotor position detection method are focused in order to compensate for disadvantage of general sensors. Search coils wound through the hole of the stator poles are used for detection of the rotor position in TSRM. Rotor position detection is achieved through electromotive force patterns induced by time-varying flux linkage in the search coils and then adequate phase is excited for drive. The initial rotor position estimation method is also described. The validity of the method is verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.952-954
• /
• 2002

The effort for measuring the rotor vibration caused by the short of rotor winding or air-gap eccentricity has been carried on. This paper introduces on-line vibration monitoring technologies using search coils to measure flux for synchronous generators. A 3,300/6,600 (V), 150 [kW] synchronous generator is built, and search coils are designed and inserted in the wedges. Furthermore, air-gap eccentricity is analyzed by finite element method and compared with experiment tests. Induced voltages caused by different air-gap eccentricity on the search coils are compared as well.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.705-712
• /
• 2004

In this paper, detection of rotor position at standstill of toroidal switched reluctance motor(TSRM) with built-in search coils using neural network is proposed. When search coils are used as a position sensor, it has many advantages like low cost, decrease in the volume, high robust characteristics and wide applications. However, the initial rotor position detection is very difficult because the search coil's EMF doesn't exist at standstill. In this paper, detection of initial rotor position of TSRM with built-in search coils using neural network is suggested. The experiment for the proposed method are presented. As a result of that, the accuracy and validity of the proposed method is verified.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.448-456
• /
• 2004

This paper presents a new method of detecting rotor position in Toroidal Switched Reluctance Motor (TSRM). In this paper, low cost and robust characteristics of rotor position detection method are focused in order to compensate for disadvantage of general sensors. Search coils wound through the hole of the stator poles are used for detection of the rotor position in TSRM. Rotor position detection is achieved through electromotive force patterns induced by time-varying flux linkage in the search coils and then adequate phase is excited for drive. The validity of the method is verified by experimental results.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.8
• /
• pp.281-288
• /
• 1984

A new method of protecting 3-phase squirrel-cage induction motor aginst burning-out by unbalance operation is proposed. This paper studied various kinds of situations occurred by unbalance operating in 3-phase induction motor, and we provided the search coils in the slots of stator and rotor for the purpose of detecting electrical phenpmena during unbalance operation. Through experiments, we find that search coils in the slots of stator is effective method for protecting the induction motor from unbalance operating.