• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.492-501
• /
• 2007

UMTS-WLAN interworking approach can make the best use of the advantages of both networks by eliminating the stand-alone defects of the two services. For the interworking mechanisms of WLANs and UMTS networks, two major solutions have been proposed, namely loose coupling and tight coupling. The loose coupling approach provides separate data paths for WLAN and UMTS. On the other hand, the tight coupling provides a full integration of the WLAN network and the UMTS core network. The loose coupling has been preferred due to the simplicity and less reconfiguration requirement. However, loose coupling is worse in seamless mobility, QoS provision, and network security. In order to lessen the problems involved in the UMTS-WLAN interworking approaches, we propose a new interworking network architecture and a fast vertical handover scheme by employing Mobility Anchor(MA) for interworking between the two different networks. MA can enable authentication and session initialization before L2 handover of the mobile terminal, so that the seamless and fast vertical handover become possible. Thru analysis and numerical experiments, we proved that the proposed scheme has been validated.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.29-35
• /
• 2016

High-availability seamless redundancy (HSR) is a fault-tolerant protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy is forwarded on a separate physical path. HSR is a potential candidate for several fault-tolerant Ethernet applications, including smart-grid communications. However, the major drawback of the HSR protocol is that it generates and circulates unnecessary frames within connected rings regardless of the presence of a destination node in the ring. This downside degrades network performance and can deplete network resources. Two simple but efficient approaches have previously been proposed to solve the above problem: quick removing (QR) and port locking (PL). In this paper, we will present a hybrid approach, QRPL, by combining QR with PL, resulting in further traffic reductions. Our analysis showed that network traffic is significantly reduced for a large-sized HSR connected ring network compared to the standard HSR protocol, QR, and PL.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2583-2605
• /
• 2016

Fingerprint positioning is a main stream and key technique for seamless positioning systems. In this paper, we develop a performance evaluation testbed for fingerprint based Wireless Local Area Network (WLAN) positioning system. The testbed consists of positioning server, positioning terminal, Access Point (AP) units, positioning accuracy analysis system and testing scenarios. Different from other testbeds tended to focus on testing in same situation, in the proposed testbed, a couple of scenarios are set to test the positioning system including indoor and outdoor environments. Handset-side positioning mode and network-side positioning mode are provided simultaneously. Variety of motion models, such as static model, low-speed model and high-speed model are considered as well as different positioning algorithms. Finally, some implementation cases are analyzed to verify the credibility of the testbed.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.89-96
• /
• 2016

In mobile communication, there are various types of handoff for the support of all forms of mobility. Proxy mobile IPv6 (PMIPv6) enables local network-based mobility management of a mobile node without any effect of mobility-related signaling. Recently, PMIPv6 has been considered for supporting mobility management in LTE/SAE-based mobile networks. To support seamless mobility in heterogeneous mobile networks, the overall cost of handoffs needs to be minimized and the procedure should be guaranteed to be secure. However, the reduction of the authentication cost has not been fully investigated to provide seamless connectivity when mobile users perform a handoff between the PMIPv6 domains. This paper proposes secure pre-authentication schemes, completing an authentication procedure before performing a handoff, for a fast handoff in PMIPv6. Analytic models have been used for measuring the authentication latency and for the overhead cost analysis. In addition to providing fast authentication, the proposed pre-authentication schemes can prevent threats such as replay attacks and key exposure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.165-168
• /
• 2007

The objective of this study is to demonstrate and commercialized for on-board fuel storage system for the hydrogen fuel cell vehicles. Type3 composite cylinder is consisting of the full wrapped composites on a seamless aluminum liner. Especially, the seamless aluminum liner has been commercialized with development of fabrication through this study. The key technologies, including design, analysis and the optimized filament winding process for 350bar composite cylinder, were established and verified with design qualification test in accordance with international standard. And the facilities for fabrication and design qualification test have been constructed.

• Annual Conference of KIPS
• /
• 2001.04a
• /
• pp.545-548
• /
• 2001

3GPP2 방식에서는 Macro Mobility 지원을 위하여 MIP를 이용하며 PDSN은 FA의 기능을 수행한다. PDSN 관리 영역 내의 하나의 RN에서 다른 RN으로 이동시에 지원되는 이동성을 Micro Mobility라 한다. Micro Mobility에서 Seamless한 핸드오프를 위해 RN간에 멀티캐스트 그룹 메커니즘을 이용할 경우, 핸드오프 예상시간에 따라 등급별로 버퍼를 다르게 할당하여 멀티캐스트 하는 방법과 단순 멀티캐스트 하는 방법이 있다. 본 논문은 Micro Mobility를 지원하기 위한 멀티캐스트 그룹 메커니즘 기반의 Seamless 핸드오프 알고리즘에서 등급별로 버퍼를 다르게 할당할 경우와 단순 멀티캐스트 할 경우의 블록킹 확률을 비교 분석한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1319-1320
• /
• 2011

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• International Journal of Contents
• /
• v.10 no.2
• /
• pp.9-17
• /
• 2014

Since vehicles' trajectories are so complex and dense traffic changes in nature frequently, the VANET (Vehicles Ad-hoc Network), using Omni-directional Antenna, has many channel collisions (or overlapping) on Data Link phrases (MAC layers). It is not easy to keep a good seamless communication status for VANET because of its unpredictable network environment. Among VANET research, Directional Antenna have been proposed as one of the most common systematical solutions to reduce (or to mitigate) this miss-communication problems by narrowing communicational ranges and making use of its customized error-detection process. However, even though Directional Antennas help VANET keep good seamless communication, many VANET researchers have reported that Directional VANET still has miss-communicational problems - this has lead to problems like 'Directional Hidden Terminal Problem', 'Deafness', 'Un-accuracy Lobe Scopes' and 'High Deployment Cost' being reported in various papers. To establish well-organized design assessments for a good Directional VANET MAC protocol to overcome these problems, we rearranged and grouped current Directional VANET' qualitative criteria from several current survey papers using these categories- 'Directional Discovery', 'Directional Forwarding' and 'Directional Handover'. In addition, based on the results of the following analysis, we show the essential design concerns that need to be looked at in order to develop a well-designed Directional-VANET MAC protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.99-114
• /
• 2012

Proxy Mobile IPv6 (PMIPv6) has received considerable attention between telecommunications and the Internet communities and does not require active participation of the Mobile Node (MN) by way of network-based mobility management. The PMIPv6 domain is studying establishment in progress to support extensively a number of MN by using a low handover latency. In this research, we are propose a novel 3S scheme for building Scalable and Secure and Seamless PMIPv6 domains. In the proposed scheme, all of Mobility Access Gateway (MAG) are acting as the Local Mobility Anchor (LMA) and composing a virtual ring with another MAG. General hashing is used in the efficient distribution-mapping between each MN and the MN's LMA of all MAGs. And, MAG and MN are authenticated using the symmetric key. Through mathematical analysis, we verifies the safety, scalability, and seamless service for 3S. Also, we're propose a handover procedure of 3S and show better than the existing schemes in terms of handover latency.