Generally, the laser vision sensor makes it possible design a highly reliable and precise range sensor at a low cost. When the laser vision sensor is applied to lap joint welding, however. there are many limitations. Therefore, a specially-designed hardware system has to be used. However, if the multi-lines are used instead of a single line, multi-range data .:an be generated from one image. Even under a set condition of 30fps, the generated 2D range data increases depending on the number of lines used. In this study, a laser vision sensor with a multi-line pattern is developed with conventional CCD camera to carry out high speed seam tracking in lap joint welding.
Kim, Yountae;Han, Myeong-Ki;Beak, Gyeong-Dong;Hwang, Joon-Seok;Lee, Dae-Hyung
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2013.05a
/
pp.540-543
/
2013
선박은 판과 보강재를 효율적으로 조립한 매우 복잡한 구조물이고, 이동하는 구조물로써는 최대규모의 구조물이다. 특히, 선체 구조의 설계란 "예상되는 모든 하중에 충분히 견딜 수 있는 강도(strength)와 강성(stiffness)을 가진 부재의 크기를 결정하고 적절히 배치하는 과정이다." 라고 말할 수 있다. 선체 구조의 설계는 부재의 배치가 얼마나 적절하게 잘되어 있는가에 달려 있다고 하여도 과언이 아닐 정도로 매우 중요하다. 주요 구조 부재의 부재 배치에 대한 기본적인 개념은 판 부재의 용접선(seam line), 종, 횡늑골의 간격, 종거어더 등을 예로 들 수 있으며, 부재의 배치는 최적 설계 및 공작상의 관점으로부터 선정되어야 하며, 또한 선체 전체의 구조적인 연결이 불연속이 되지 않도록 하여야 한다. 특히, 판 부재의 용접선은 여러 가지 표준치수로 생산되는 판 들 중, 판의 기준 폭이 얼마인 것을 사용하는 것이 공작상 또는 배치상 가장 편리한 가를 생각하여야 한다. 이것은 선박의 크기에 따라 다르겠지만, 조선소 크레인의 용량 및 가공상, 강도상의 문제를 고려하여 가능한 한용접선의 수를 줄이는 것이 바람직하다. 용접선을 줄이기 위해서는 판 부재의 폭을 넓게 하면 되나, 철강회사에서 표준으로 생산 판매하는 주판의 폭보다 넓은 판을 주문 구입 한다는 것은 곧 생산비용의 증가로 이어지는 것으로 이는 주판 구입 경비 측면에서는 바람직하지 않다. 따라 서, 주판 구입경비의 최소화를 유도하면서도 주판 폭의 적정 및 용접선 개수 최소화를 유지할 수 있도록 설계하는 것은 중요하지만, 용접선 배치의 문제는 다양한 입력 변수를 고려해야 하는 복잡한 문제이기 때문에 그간 최적화 관점에서 접근하지 못하고 시니어급 엔지니어가 가진 경험과 조선소의 지침서에 기재된 절차에 따라 대략적인 해를 결정하여 왔다. 본 연구는 이러한 복잡한 문제를 최적화 방법인 당금질(Simulated Annealing) 방법을 이용하여 해결한 결과를 소개하며, 그 결과와 효용성에 대해 논하도록 하겠다.
There are many methods to reduce the weight and the cost of the automobile body, among them, Tailor Welded Blank (TWB) is new welding method applied to body structure. It is necessary to evaluate mechanical properties of TWB structures or sheets for the application to automobile body parts. In this study, the stiffness of T-type and L-type joint structures, composite of TWB panel, which simplified two portions of side structure in automobile body were investigated. Additionally, the fatigue properties of TWB panels were obtained. Two types of welding technologies, laser and mash seam welding, were used to join mild panels with different thickness. This results are compared with conventional structures. The results are as follows: 1) The stiffness of joint structures, composite of TWB panel, is approximately 17% higher than that of conventional ones. 2) The location of welding line in TWB had a effect on the in plane bending stiffness, but not on the out of plane bending stiffness. 3) In terms of welding technology type, the mash seam welding show higher stiffness than the laser welding for in plane bending stiffness. But minimal differences in both types are revealed for out of plane bending stiffness. 4) The fatigue strength, composite of TWB panel, is lower than that of base steel. It is thought that defects in the welding zone had the action of notch in the fatigue test.
As a result of research, the character of the general dress-costumes from the late 17th century to the early 18th century in Genre Paintings of DuSeo Yun and YoungSeok Cho is as follows. Firstly young women wore braided hair at the back of head and married women wore hair in the style of Unjeun-mori with Gache. The length of Jeogori (Korean traditional jacket) covered waistor shortened to waist length. The width of Jeongori was suitable, because side-seam line was straight or oblique as it comes into inner line. The width of Git was enough and Mokpan-git (shape of board) and Kal-kit (shape of knife) appeared, and sometimes used other color fabric. Sleeve was narrow and ostly folded up. Chima (Korean traditional skirt) used darker color fabric than Jeogori and the width of Chima was narrow and its length was short. Sokbaji (Korean traditional underpants) shown below were narrow and its end narrower. They were barefoot or they wore Hye (Korean traditional shoes) after putting on Beoseon (Korean traditional socks). Secondly general man's hair tie a topknot (sangtu) and put on headdres, 'Bang-lip', 'Mang-geon', hairband, 'Tang-geon' on head. The length of Jeogori became shorter from the line which covered hip to the line which covered waist. The width of Jeogori was suitable and sometimes it had a slit of side-seam line. The width of Git (neckand) was wide and the length of Git was long. 'Kal-git'appeared and it used other color fabric. The shape of sleeve was straight and narrow. They folded up their sleeves. They folded up their sleeves. They folded up their slack that look like 'Jam-bang-i'and the width of slacks was not suitable, and it was narrow. Baji (Korean traditional pants) were with or without knot, worn 'Hangjeon'(ankle band). They were barefoot and wore 'Hye'or 'Jipsin'(Korean traditional straw shoes). Thirdly a person of high birth or a low-ranked official put 'Yu-geon', 'Mang-geon', 'Gat', 'Tang-geon', 'Bok-du', 'Bok-geon', 'Whi-hang'on their head on a topknot. They wore 'Po (Shim-ui, Jick-ryeong'Jung-chi-mak, Do-po, etc)'on Baji and Jeogori. 'Po'was long and wide, it knot with 'Se-jo-dae'(string belt) or 'Po-baek-dae'(band belt). It had a slit of sideline and 'Mu'which had or had not or which were hard to confirm. The shape of sleeve was straight or very wide and its length was long. The width of Baji was wide and knotted with 'Hangjeon'and wore'Beoseon'and 'Hye'. Fourthly child's hair was short or knotted to the back of the head. The length of Jeogori reached waist line and its width was wide. It had a 'Jeogori'which had s slit of sideline. The shape of sleeve was 'Tong-su'(straight), and the length of sleeve was diverse. They put 'Baeja'on 'Jeogori'. The width of Baji was not wide. They wore them straight without or with knot, 'Hangjeon'. They were barefoot or put on 'Jipsin'.
Journal of the Korea Fashion and Costume Design Association
/
v.7
no.1
/
pp.33-40
/
2005
Gathering is method used to control fullness along a seam line. The purpose of this study was to investigate the relationship between the quantitative research and qualitative method; the effect of gather and the types of gather drape. The experimental design consists of four factors: (l) three kinds of different weight and thickness of fabrics (2) three kinds of stitch densities (3) five kinds of ratio of gathers (4) three kinds of grain directions. Therefore one hundred thirty five (135) samples were made. And utilized SPSS WIN 10.0 Package in data analysis. The results of this study were as follows; First, after frequency analysis, side height, hem line width, node depth, node count, node width accorded with these result data recording. Second, after correlation analysis, side height related with front statements. Side height and entire visual was negative correlation. Hem line width, node depth, node count with section statements was negative correlation but node width at section statements was positive correlation. Third, after $k^2$ analysis, front picture parts getting excellent evaluation were 1st side height, 3rd hem line width, 4th node depth, 3rd node count, 3rd node width. And section illustration parts getting excellent evaluation were 4th side height, 1st hem line width, 2nd node depth, 3rd node count, 4th node width.
Since the wall thickness can be up to 6" or greater, welds must be made in many layers, each layer containing several passes. However, the welding time for the conventional welding processes such as SAW(Submerged Arc Welding) and FCAW(Flux Cored Arc Welding) can be required many hours. The aim of this paper is to develop a high speed welding system with multi-torch and laser vision sensor for increasing the production speed on the line and to remove the need for the operator so that the system can run automatically for the complete multi-torch multi-layer weld. It was shown that the developed laser vision sensor and analysis of arc blow for multi-torch were effective for multi-pass seam tracking and stable arc. A new automated multi-torch welding systems for thick wall applications has been proved in several production lines.
Kim, Young-Jin;Cho, Young-June;Lee, Kang-Won;Shon, Woonh-Hee
Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
/
2006.11a
/
pp.281-284
/
2006
After building a ship in a shipyard, there are so many repeated inspection of welding seam defects and painting status before delivering to the ship's owner. An inspection on the bottom part of a ship in commercial service should be done in every two years for the purpose of safety and for the prevention of ship speed deterioration. conventional welding seam inspection systems are rely on the visual inspection by human or the ultrasonic inspection for the selective part of a ship. This paper suggests a remote controlled inspection system for the examination of large ships or steel structures. The proposed system moves in contact with the ship under inspection and have a CCD camera to provide visual-guidance information to a remotely located human worker. Additionally this system utilizes a weld line tracking algorithm for an optimal position control. We verified the effectiveness of the inspection system by experimental data.
The study on plane composition in clothing was focused mainly on woven wear earlier but its application has been reaching the knit wear. This study is confined to the utilization with geometrical linear pattern in the modern apparel. The work here intends to grasp the plane structure found in both woven wear and knit wear and, in particular, to understand the aesthetics of fashion. The modern flat patterned clothing has been affected by the oriental style or postmodernism in view of social and cultural aspect while its fabric material and expression method shows the diversity in terms of industrial and technical aspect. It can be characterized as several outstanding patterns: the geometrical pattern in structure, the linear pattern with seam line and 2-dimensional plane pattern without seam line, and the flexible silhouette integrated into one single shape with human body unlike the traditional apparel The aesthetics of fashion in modern flat patterned clothing can be divided into such category as the organically spatial change, the re-creation of tradition and the non-format framework. The organically spatial change shows the geometrical formation in clothes due to change in dimension, where the organically changing uniformity and generosity appears as the dimension progresses. The timeless without any difference of up and down, left and right, and inside and outside and the discontinuity due to limitless spatial change are also imbedded. The re-creation of tradition tells the reshaped spirits of old tradition by integrating and modifying the hereditary features in the old customed clothing into modern clothing. The modern flat patterned clothing implies the contemporaneousness or the frame through which the old and modern cultures may be shared and indicates the re-creation of the past and uniformity. The non-format framework contains the uncertainty in meaning and it doesn't have any certain standards. As both the apparel and the human body with this style aim at the open space, the numerous contingencies are realized.
Journal of the Korean Society of Clothing and Textiles
/
v.30
no.9_10
s.157
/
pp.1344-1353
/
2006
The purpose of this research is to investigate the actual wearing conditions of working uniform and identify problems for the aircraft mechanic. For this study, questionnaire surveys were conducted dividing according to styles of clothing; one-piece and two-piece styles. Subjects were 343 men working in flight line. Questionnaire of 159 two-piece styles and 184 one-piece ones were used in analysis. The results of the study are as follows; The result about wearing each type of working uniform showed that the two-piece one is always as the air force uniform, whereas the one-piece one is worn only a few times. They felt inconvenience during all operations except in the sitting position, crawling position, and positions in which they were using tools. Accordingly, the result of the functionality reported dissatisfaction on all question items. Therefore, uniform of two-piece style achieved better results on all questions related to motional flexibility and functionality. Questions on changes to finishing methods showed that each airline employed different methods for both two-pieced and one-pieced uniforms. The answers about the unstitched or worn-out parts of the two-piece garments showed that pants were unstitched on the inner seam of the trouser leg and hip regions, but the upper one was not. In case of the one-pieced uniform, the parts of wearing out is the seam of hip and the unstitched parts are knee region and hem line of pants. Questions concerning their satisfaction with the material of uniforms indicated a high rate of dissatisfaction, particularly in its ventilation and absorbency. Questions concerning the preferred design of working uniform indicated a preference for two-piece uniform rather than one-piece ones.
In this study, about forty teaching materials have been analyzed in order to examine tight skirt sewing methodtreated in basic process in a college and a fashion related educational institution. The study objects limited with a belt, back centered zipper, and back double slits on a tight skirt, and used fifteen suitable teaching materials in this study. The first study result appeared that every single teaching material suggested the different way of wick adhesion which is used in zipper slit, back slit, and belt part when the skit has been manufactured in order to do a form of clothes well. Secondly, it is the case of a back slit part used for the purpose of both functionality of action and decoration, and it is the section which varies a sewing and cutting way according to seam room width of a back middle seam. However, the majority of teaching materials appeared by being selecting the way how it had cut an inseam of the back center by the both upper part of back slit. Finally, the result showed that it mentioned mainly only both sided zipper sewing method if it seems to be easy to treat the majority in a basic process even though use of a console zipper Is general on a zipper sowing way recently for several years. Also, two forms are used in the belt manufacturing, and they are based with a waist line. However, the teaching materials that were used in this study presented only a manufacture way of the straight line on the waist belt.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.