• 보존과학연구
• /
• s.7
• /
• pp.246-264
• /
• 1986

Micoromorphological alterations of sea-waterlogged woods by marinemicro-oragnisms were investigated by the light and scanning electron microscopy as a part of serial investigations on the shipwrecked materials which were excavated at the sea shore of Wando-Kun, southern coast of Korea in 1984.Deterioration of sea-waterlogged wood by marine microorganisms were varied with the wood species. The degree of deterioration even in the same wood specieswas different according to the part where it was in mud of sea-water. However, the resistance of Torreya nucifera over the marine organisms was marked. Deterioration in cell wall may be classified into three types; thinning of cell wall, separation of secondary wall from compound middle lamella and tunneling of cell wall. Thinning and separation were frequently observed, while the tunneling was rare. Among the wood cell elements of hardwoods, vessel wall was the least deteriorated. The difference degree of degradation of cell wall constituents and the accumulation of inorganic substances in cell lumen indicate that some factors to be considered for the conservation treatment were discussed. The kinds of marine microorganisms invading and/or inhabiting in wrecked wooden ship were also discussed.

• Animal Systematics, Evolution and Diversity
• /
• v.30 no.2
• /
• pp.132-136
• /
• 2014

Five sea cucumbers were collected from Gisamun and Gonghyeonjin of Gangwon-do, in the East Sea, Korea from 27 December 2009 to 14 November 2012. These specimens were classified as Synallactes nozawai Mitsukuri, 1912 belonging to the family Synallactidae of order Aspidochirotida based on morphological characteristics. The family, genus and species are recorded for the first time from Korea. The distinct morphological characteristics of this species are as follows: body flexible, with thin gelatinous body wall; presence of numerous tubercles along dorsal ambulacra table of body wall consisted of three- or four-armed disk and a spire-form pillar. This species usually inhabits the deep sea and is distributed in the Northwest Pacific from northern Japan to Bering Sea.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.335-343
• /
• 2019

Overtopping discharge for sea dike having low mound and high wave wall (LMHW sea dike) is investigated with hydraulic experiments in this study. Vertical, Flare and Bullnose type wave walls are selected and Tetrapods (double layer) and Accropode (one layer) are adopted for armour layers of the front slope. The results of the hydraulic experiments are compared to the overtopping formulas for armoured rubble slopes and vertical sea dikes suggested by EurOtop Manual. Predicted overtopping discharges are underestimated as the roughness efficiency factors (γ_f) of armour blocks suggested by EurOtop are adopted when the overtopping formula for armoured rubble slopes sea dike is used. Meanwhile the predicted overtopping discharges agree well with the hydraulic experiments when the modified roughness efficiency factors redefined by multiplying efficiency factor of the heights of armoured crest berm and wave wall (γ_AR) are adopted. Return wall effects on a vertical wall (Kortenhaus et al., 2003; Pearson et al., 2004a) and the effects on a smooth dike slope (Van Doorslaer et al., 2015) in EurOtop Manual are investigated for Flare and Bullnose type wave walls. As a results of the comparison between experimental results and 2 formulas, return wall effect on a smooth dike was more valid for LMHW sea dike.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.894-903
• /
• 2014

Insertion loss prediction of large acoustical enclosures using Statistical Energy Analysis (SEA) method is presented. The SEA model consists of three elements: sound field inside the enclosure, vibration energy of the enclosure panel, and sound field outside the enclosure. It is assumed that the space surrounding the enclosure is sufficiently large so that there is no energy flow from the outside to the wall panel or to air cavity inside the enclosure. The comparison of the predicted insertion loss to the measured data for typical large acoustical enclosures shows good agreements. It is found that if the critical frequency of the wall panel falls above the frequency region of interest, insertion loss is dominated by the sound transmission loss of the wall panel and averaged sound absorption coefficient inside the enclosure. However, if the critical frequency of the wall panel falls into the frequency region of interest, acoustic power from the sound radiation by the wall panel must be added to the acoustic power from transmission through the panel.

• Economic and Environmental Geology
• /
• v.46 no.2
• /
• pp.105-121
• /
• 2013

This study introduces integrated approach on detection of a leakage in a sea wall based on remote sensing, electric resistivity survey, electromagnetic survey, and borehole survey for the Seosan A-Region sea wall. The satellite temperature distribution from Landsat ETM+ data identifies water leakage distribution and period by analyzing temperature mixing patterns between sea water and fresh water. Electric resistivity survey provides both horizontal and vertical anomaly distributions over the sea wall showing below average electric resistivity. Electromagnetic survey(electrical conductivity survey) reveals the potential possible leakage areas with minimal background impact by comparing electrical conductivity values between high and low tides. Borehole image processing system confirmed the locations of anomalies identified from the other survey methods and distributions of vertical fracture zones. The integrated approach identified 41.7% of the sea wall being the most probable area vulnerable to water leakage and effectively approximated both horizontal and vertical distribution of water leakage. The integrated analysis of remote sensing, electric resistivity survey, electromagnetic survey and borehole survey is considered to be an optimal method in identifying water leakage distribution, period, and extent of fractures knowledged from the boreholes.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.2
• /
• pp.179-182
• /
• 2007

In this study hydraulic model experiment was conducted to identify the performance of newly developed water affinity sea-wall block to keep the coastal line from eroding and supply water affinity space by reflection coefficient and safety. In the result, the block is applicable to the field.

• Water for future
• /
• v.17 no.3
• /
• pp.197-209
• /
• 1984

This study has been carried out to investigate into the local scour of wall-toe and the beach deformation caused by the construction of a seal wall. It has been performed to determine the values of the marine invertigation of HAE UN DAE and two dimensional Movable bed gydraulic model test. From the results of this work approtection method of HAE UN DAE beach erosion is established to reduce the amount of topography deformation by investigating the values of the constructive position of a sea wall, seabed slope, the maximum scour depth, the first and the second influence range, the maximum quantity of beach deformation, and the distance measured from the sea will to the maximum quantity of beach deformation.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.439-446
• /
• 2016

In 2015, a fin tube (Cu-Ni 70/30 alloy) of package type heat exchanger for navy vessel was perforated through the wall which led to refrigerant leakage. This failure occurred after only one year since its installation. In this study, cause of the failure was determined based on available documents, metallographic studies and computational fluid dynamics simulation conducted on this fin tube. The results showed that dimensional gap between inserted plastic tube and inside wall of fin tube is the cause of the swirling turbulent stream of sea water. As a result of combination of swirling turbulence and continuing collision of hard solid particles in sea water, erosion corrosion has begun at the end of inserted plastic tube area. Crevice corrosion followed later in the crevice between the outer wall of plastic tube and inner wall of fin tube. It was found that other remaining tubes also showed the same corrosion phenomena. Thorough inspection and prompt replacement will have to be accomplished for the fin tubes of the same model heat exchanger.

• Hwankyungkyoyuk
• /
• v.18 no.1 s.26
• /
• pp.120-133
• /
• 2005

This study investigated the changes of consciousness and ambivalent attitudes about the important environmental issues among the teachers who enrolled the environmental education training. Experimental and control groups were composed with 47 and 30 person, respectively. Environmental issues were constructions of sea-wall, nuclear power plant and dam. Cronbach alpha of the self-developed questionnaire was $0.6909{\sim}0.8992$. Score were made with 5 Likert scales for consciousness, and with semantic differential half scale for ambivalent attitudes. Almost teachers(94.0% and 97.1%) have above 10 years teaching career. Strangers in environmental program were 53.2%. After environmental training, teachers' consciousness was significantly changed to negative about the construction of sea-wall for the farm field and industry complex area(p=0.019), and about the construction of dam for disaster like flood(p=0.026), and for adverse effects of citizen by fog(p=0.042). They were also significantly changed to negative about the construction of nuclear power plant for economical energy(p=0.004)', no-emission of greenhouse gases(p=0.033)', 'alternative energy(p=0.000)', 'destruction of ecology(p=0.052)' and 'social fear(p=0.009)'. The consciousness of teachers who have the experience of environmental training, were significantly changed to negative about the construction of nuclear power plant. Scores of teachers' ambivalent attitudes were made lower in experimental than control group about the construction of sea-wall and nuclear power plant. After education training, they were made lower so much as -10.0% in control, but higher much as +4.4% in experimental, and severely higher much as 86.5% in teachers who had experienced the environmental training about construction of sea-wall. Their scores were made lower so much as -3.3% in control, but much as -6.4% in control.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.104-109
• /
• 2002

The purpose of this study is to calculate transmission loss of KHST passenger vehicle's wall section accurately Typical transmission loss measurement of wall in the laboratory condition was carried out in advance, which is easier than KHST. Transmission loss results were compared with those by statistical acoustic method. Transmission loss values of KHST calculated by experimental method are compared with those from closed form solution.