• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.461.2-461.2
• /
• 2014

양자점은 밴드갭을 조절할 수 있거나 multiple exciton generation등 과 같은여러가지 장점을 갖고 있어 양자점 감응형 태양전지에 대한 많은 연구가 진행되어왔다. 하지만 아직까지 이론적인 에너지 전환 효율에 비하여 낮은 효율을 보여주고 있다. 이러한 낮은 효율은 양자점과 전해질 계면에서의 defect나 surface state로 인한 전자-정공의 재결합으로 설명할 수 있다. 본 연구에서는 CdSe 양자점 합성법 중의 하나인 Chemical Bath Deposition의 전구체 농도조절을 통하여 고품질의 CdSe양자점을 합성하였다. 특정 농도에서 CdSe 양자점 표면에 생성되는 SeO2층을 억제하여 CdSe양자점/전해질 계면에서의 전하 재결합 저항을 높였고 가장 높은 에너지 전환 효율을 보여주었다.

• Korean Journal of Materials Research
• /
• v.19 no.11
• /
• pp.596-600
• /
• 2009

Electrochemical deposition characteristics of CdSe nanorods were investigated for hybrid solar cell applications. CdSe nanorods were fabricated by electrochemical method in $CdSO_4$ and $H_2SeO_3$ dissolved aqueous solution using an anodic aluminum oxide (AAO) template. Uniformity of CdSe nanorods was dependent on the diameter and the height of holes in AAO. The current density, current mode, bath composition and temperature were controlled to obtain a 1:1 atomic composition of CdSe. CdSe nanorods deposited by direct-current method showed better uniformity compared to those deposited by purse-current and/or purse-reverse current methods due to the bottom-up filling characteristics. $H_2SeO_3$ concentration showed more significant effects on pH of solution and stoichiometry of deposits compared to that of $CdSO_4$. A 1:1 stoichiometry of uniform CdSe nanorods was obtained from 0.25M $CdSO_4-5$ mM $H_2SeO_3$ electrolytes with a direct current of 10 $mA/cm^2$ at room temperature. X-ray diffraction and electron diffraction pattern investigations demonstrate that CdSe nanorods are a uniform cubic CdSe crystal.

• Solar Energy
• /
• v.10 no.3
• /
• pp.53-59
• /
• 1990

[ $CdSe_xTe_{1-x}$ ] ($0{\le}x{\le}1$) thin films were deposited cathodically on Ti substrates in aqueous sulfric acid solution containing 1M $CdSO_4$ and 1mM$(TeO_2+SeO_2)$. The limiting current was observed in deposition potential ranging from -0.20 to -0.65 vs.Ag/AgCl ; although its value has changed a little depending on the mole ratio x, the limiting current was almost constant in deposition potential of -0.45V in spite of the change of mole ratio x. The crystal structure of the $CdSe_xTe_{1-x}$ thin films was cubic zinc-blonde in the range of mole ratio $x=0{\sim}0.8$, and hexagonal wurtzite in the mole ratio x=1 When the mole ratio changed from x=0 to x=0.8, diffraction peaks was shifted to the larger diffraction angle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.383-386
• /
• 2002

Polycrystalline Cu(In,Ga)Se$_2$(CIGS) thin-films were grown by co-evaporation on a soda lime glass substrate. In this paper the effects of the Se evaporation temperature on the properties of CuIn0.75Ga0.25Se2 (CIGS) thin films. Structure, surface morphology and optical properties of CIGS thin films deposited at various Se evaporation temperatures have been investigated using a number of analysis techniques. X-ray diffraction (XRD) analysis shows that CIGS films exhibit a strong <112> preferred orientation. As expected, at higher Se evaporation temperatures the films displayed a lower degree of crystallinity. The <112> peak was also enhanced and other CIGS peaks appeared simultaneously. These results were supported by experimental work using scanning electron microscopy When the Se evaporation temperature was increased, the average grain size also decreased together with a reduction Cu content. The Se evaporation temperature also had a significant inf1uence on the transmission spectra. Increasing the Se evaporation temperature, the cell efficiency was improved dramatically to 11.75% with Voc = 556 mV, Jsc = 32.17 mA/cm2 and FF = 0.66. The Se evaporation temperature is an important parameter in thin film deposition regardless of the deposition technique being used to deposit thin films

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.1-4
• /
• 2004

Polycrystalline CdSe thin films were grown on ceramic substrate using a chemical bath deposition(CBD)method. They were annealed at various temperature and X-ray diffraction patterns were measured by X-ray diffractometer in order to study CdSe polycrystal structure. Using extrapolation method of X-ray diffraction patterns for the CdSe samples annealed in $N_2$ gas at $450^{\circ}C$ it was found hexagonal structure whose lattice parameters $a_0$ and $c_0$ were $4.302{\AA}$ and 7.014 ${\AA}$, respectively. Its grain size was about 0.3 ${\mu}m$. Hall effect on this sample was measured by Van der Pauw method and studied on carrier density and movility depending on temperature. From Hall data, the mobility was likely to be decreased by piezo electric scattering at temperature range of 33K and 200K, and by polar optical scattering at temperature range of 200K and 293K. We measured also spectral response, sensitivity$(\gamma)$, maximum allowable power dissipation and response time on these samples.

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.12-18
• /
• 2010

$CuInSe_2$ (CIS) thin films were electrodeposited on Mo-coated glass substrates in acidic solutions containing $Cu^{2+}$, $In^{3+}$, and $Se^{4+}$ ions, depending on deposition parameters such as deposition potential (-0.4 to -0.8 V[SCE]) and pH (1.7 to 1.9). The influences of PH and deposition potential on the atomic composition of Cu, In, and Se in the deposited films were observed. The best chemical composition, approaching 1:1:2 atomic ratio for the elements, was achieved at -0.5 V (SCE) and pH 1.8. The as-deposited films showed low crystallinity and were annealed at 300 to $500^{\circ}C$ for 30 min to improve crystallization. The surface morphologies, microstructures, and crystallographic structures of the annealed films as well as the as-deposited films were analyzed with AFM, SEM, and XRD. The defects of spherical particles appeared on the surfaces of CIS thin films in the as-deposited state and decreased in size and number with increasing annealing temperatures. Additionally, the crystallization to chalcopyrite structure and surface roughness (Ra) of the as-deposited thin films were improved with the annealing process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.229-236
• /
• 2007

This study was conducted to determine effects of different selenium (Se) sources on performance, carcass characteristics, blood measures (whole blood Se concentration and plasma glutathione peroxidase (GSH-Px) activity), and Se concentrations in tissues of finishing Hanwoo steers (Korean native steers). Twenty finishing Hanwoo steers (average body weight=536${\pm}$23.4 kg, average age=approximately 20 months) were allotted to treatments in four groups of five steers per pen for 16 weeks preceding slaughter. Treatments were control (CON), spent mushroom composts from Se-enriched mushrooms (Se-SMC), selenized yeast (Se-Y), and sodium selenite (SS). Dietary Se levels of all treatments except CON were 0.9 mg Se/kg on the dry matter basis. Body weight was measured at the first and final day of trial, and blood samples were collected to analyze whole blood Se concentration and plasma GSH-Px activity at 2, 4, 8, and 16 weeks. At the end of trial, steers were slaughtered to collect muscle and liver samples for their Se analyses, and carcass data were recorded. In terms of dry matter intake, body weight gain and carcass characteristics, no significant differences among treatments were observed. Whole blood Se concentrations were significantly higher (p<0.05) for Se-SMC and Se-Y treatments than for CON at each collection period, with no significant difference between SS and CON. For weeks 2 and 8, there was no significant difference for whole blood Se concentration between Se-SMC and Se-Y, but for weeks 4 and 16, Se-Y treatments were significantly higher (p<0.05) than Se-SMC. No differences were observed for plasma GSH-Px activity between Se-SMC and Se-Y. The Se concentrations in hind leg and liver were significantly different among treatments (p<0.05) and those in both tissues ranked the greatest in Se-Y, followed by Se-SMC, SS, and CON treatments. However, tissue Se concentration for SS was not different from that for CON. These results showed that feeding organic Se sources such as Se-SMC and Se-Y enhanced Se concentration in tissues, while SS, the most common supplement of inorganic Se, was inefficient in Se deposition. Even though Se-Y had a higher Se concentration in tissues than Se-SMC, replacing Se-Y with Se-SMC in diets of beef steers would be an inexpensive way to increase Se concentration in beef.

• Journal of Powder Materials
• /
• v.28 no.3
• /
• pp.239-245
• /
• 2021

The SnSe single crystal shows an outstanding figure of merit (ZT) of 2.6 at 973 K; thus, it is considered to be a promising thermoelectric material. However, the mass production of SnSe single crystals is difficult, and their mechanical properties are poor. Alternatively, we can use polycrystalline SnSe powder, which has better mechanical properties. In this study, surface modification by atomic layer deposition (ALD) is chosen to increase the ZT value of SnSe polycrystalline powder. SnSe powder is ground by a ball mill. An ALD coating process using a rotary-type reactor is adopted. ZnO thin films are grown by 100 ALD cycles using diethylzinc and H₂O as precursors at 100℃. ALD is performed at rotation speeds of 30, 40, 50, and 60 rpm to examine the effects of rotation speed on the thin film characteristics. The physical and chemical properties of ALD-coated SnSe powders are characterized by scanning and tunneling electron microscopy combined with energy-dispersive spectroscopy. The results reveal that a smooth oxygen-rich ZnO layer is grown on SnSe at a rotation speed of 30 rpm. This result can be applied for the uniform coating of a ZnO layer on various powder materials.

• Solar Energy
• /
• v.10 no.2
• /
• pp.59-68
• /
• 1990

In this paper, photoconductive pure CdSe films and CdSe films doped with various impurities are fabricated by vaccum deposition and subsequent heat treatment in vaccum. The substrate is kept at $200^{\circ}C$ during deposition and temperature generally makes the films more photoconductive. The photocurrent of the films increase linearly with light illumination. Spectral response of photoconductivity is measured at the wave length range of 380nm to 850nm. The maximum response is found at 700nm in pure CdSe films, but it shifts to the longer wavelength in impurity-doped CdSe films. Photo-response of the pure CdSe films are more sensitive at lower temperature, while the impurity-doped films show the opposite trend.

• Current Photovoltaic Research
• /
• v.9 no.4
• /
• pp.137-144
• /
• 2021

In this study, the microstructure of the CVD-fabricated Cu(In,Ga)Se₂ (CIGSe) absorber layer by simulating the stacking sequence used in a co-evaporation method, and changes solar cell performance were investigated. The absorber layer prepared by stacking CuSe and (In,Ga)Se between InSe is separated into Ga-free CuInSe₂ and Ga-rich CIGSe, and transformed to CIGSe by selenization heat treatment with slight improvement in the the solar cell efficiency. However, in CVD, since the supply of liquid Cu-Se is not as active as in the co-evaporation method, the nanoocrystalline layer containing a large amount of Ga remained independently in the absorption layer, which acted as a cause of the loss of J_SC and FF. Therefore, by using a precursor structure in which CuGa is sputter-deposited on a single layer of InSe deposited by CVD, performance parameters of V_OC, J_SC, and FF could be greatly improved.