• 공업화학
• /
• 제28권1호
• /
• pp.73-79
• /
• 2017

이축압출기(twin screw extruder)를 이용하여 $190^{\circ}C$에서 말레인산 무수물(maleic anhydride, MAH)과 스티렌 모노머(styrene monomer, SM)의 함량을 변화시켜가며 MAH와 SM이 그래프트된 폴리프로필렌(PP-g-MAH-SM) 공중합체를 제조하였다. 제조한 PP-g-MAH-SM 공중합체의 그래프트율은 비수용성 역적정을 통하여 측정하였으며, 동일한 MAH 함량에서 SM이 사용된 경우 높은 그래프트율을 나타내었다. 그래프트율에 따른 PP-g-MAH-SM/케나프섬유(kenaf fiber, KF) 복합체를 $200^{\circ}C$에서 제조하였고, KF의 함량은 20 wt%로 고정시켰다. 복합체에 대한 열중량분석기(TGA)의 분해온도에 따르면, MAH 만 적용된 PP-g-MAH 보다 MAH와 SM이 함께 적용된 PP-g-MAH-SM 복합체의 열안정성이 다소 우세하였다. 복합체의 기계적 강도 또한 MAH와 SM이 함께 적용된 경우에 개선정도가 우수하였다. 계면접착정도는 파단면의 SEM과 접촉각으로 확인하였다.

• Composites Research
• /
• 제34권3호
• /
• pp.186-191
• /
• 2021

요추에 퇴행이 발생하였을 때 이를 치료하기 위해 요추 유합술이 시행된다. 유합술은 척추체 사이의 추간판을 제거하고 뼈 그래프트 등을 삽입하여 굳혀 하나 이상의 분절을 완전히 고정시켜 척추의 안정성을 복원한다. 둘 이상의 척추체가 단단히 유합될 수 있게끔 척추체를 고정하는 수단으로 척추경 나사못과 연결봉이 환자의 체내에 삽입된다. 본 연구에서는 중증 요추 퇴행성 질환의 치료에 쓰이는 척추 유합술에서 사용하는 척추경 나사못 구조물이 적용된 총 7개의 환자 맞춤형 요추 유한 요소 모델을 생성하였다. 생성한 모델에 각각 티타늄과 CFR-PEEK로 구성된 연결봉을 구성하였다. 척추의 4가지 대표적 거동에 대해 유한요소해석과 통계적 분석을 진행하여 연결봉의 재질이 척추 상태에 미치는 의공학적 영향을 조사하였다. 인접 분절의 추간판 내 압력과 각 분절의 관절 구동 범위가 의공학적 영향을 확인하기 위한 지표로 사용되었다. 연결봉에 CFR-PEEK를 사용한 경우 Ti 연결봉에 비해 인접 분절의 추간판 내 압력은 감소하였고 각 분절의 관절 구동 범위는 증가하였다. 그러나 모든 하중조건에서 통계학적으로 유의미한 경향성 차이는 관찰되지 않았다.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.594-605
• /
• 2006

Statement of problem: Modification of titanium implant surface has potential to ensure clinically favorable performance that several surface modification technologies have been introduced. Among the methods. anodizing method and sol-gel hydroxyapatite coating method have gained much interest due to its roughness and chemical composition of the coating layer, but more of its biocompatibility result is required. Purpose : The purpose of this study was to compare bone-implant interface shear strength of four different surface treated implants as time elapsed. Resonance frequency analysis(RFA) and removal torque measurement methods were employed to measure implant stability at one week and six week after implantation. Material and method: A total of 80 screw-shaped implant [20 machined, 20 resorbable media blasted(RBM), 20 anodized, and 20 anodized+hydroxyapatite sol-gel coated] were prepared, and one of each group was implanted in the tibia of a New Zealand white rabbit that total 20 of them were used. In order to test the implant stability and implant-tissue interface contact changing in the bone bed, each 10 rabbit were sacrificed 1 week and 6 week later while resonance frequency and removal torque were measured. One-way analysis of variance and the Tukey test were used for statistical analysis. Results : The results were as follows. 1. There was no statistically significant difference of implant stability quotients(ISQ) value in RFA between individual groups after 1 week of implantation and 6 weeks(p>0.05). But, there was statistically significant increase of ISQ value in 6 weeks group compared to 1 week group(p<0.05). 2. There was no statistically significant difference in removal torque analysis between individual groups after 1 week of implantation and 6 weeks(p>0.05). but there was statistically significant increase in all 4 groups after 6 weeks compared to 1 week later(p<0.05). 3. There was no statistically significant difference in removal torque analysis between anodized group and HA coating after anodic oxidation 6 weeks later(p>0.05), but significant difference was appeared in both groups compared to RBM group and smooth-machined group(p<0.05). Conclusions : It can be suggested that changes in surface characteristics affect bone reactions. Anodized and anodized+hydroxyapatite sol-gel coating showed significantly improved bone tissue response to implants, but further study on the effect of hydroxyapatite dissolution is needed.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.362-374
• /
• 2007

Statement of problem. The intial stability for osseointegration of implant has been an interesting factor. Especially, in the case of poor bone quality or immediately loaded implant, various strategies have been developed focusing on the surface of materials to improve implant fixation to bone. The microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. Purpose. The aims of this study are to perform a histologic and histomorphometric comparison of the healing characteristics of three different surfaces and the comparison of resonance frequency analysis (RFA) values measured by $Osstell^{TM}$ and perio-test values (PTV) measured by Periotest. Material and methods. A total of 24 screw titanium implants (Dentium Co., Seoul, Korea) with 6mm in length and 3.4mm in diameter, were placed in the mandible of 4 beagle dogs. Implants were divided into three groups following the surface treatment methods: Group I is machined(control group). Group II is anodically oxidized. Group III is coated 500nm in thickness with hydroxyapatite(HA) by ion beam assisted deposition(IBAD) on the anodized oxidization. Bone blocks from 2 dogs were caught after 3 weeks of covered healing and another blocks from 2 dogs after 6 weeks. RFA values and PTV were measured right after insertion and at 3 and 6weeks. Histomorphometric analysis was made with Kappa Image Base System to calculate bone-to-implant contact (BIC) and bone area inside the threads. Pearson's correlation analyses were performed to evaluate the correlation between RFA and PTV, BIC and bone area ratio of three different surfaces at 3 and 6 weeks. Results. 1) In all surface treatment methods, the RFA values decreased and the PTV values increased until 6 weeks in comparison to initial values. 2) At 3 weeks, no significant difference was found from bone-to-implant contact ratio and bone area ratio of three different surface treatment methods(P>0.05). However, at 6 weeks, different surface treatment methods showed significantly different bone-toimplant contact ratio and bone area ratio(P<0.05). 3) In the implants with the IBAD on the anodic oxidization, significant difference was found between the 3 weeks and the 6 weeks bone area ratio(P<0.05). 4) Correlation was found between the RFA values and the bone area ratio at 3 and 6 weeks with significant difference(P<0.05). Conclusions. These results indicate that the implants with the IBAD on the anodic oxidization may have a high influence on the initial stability of implant.

• Journal of Korean Neurosurgical Society
• /
• 제30권7호
• /
• pp.883-890
• /
• 2001

Objectives : An in vitro biomechanical study of posterior lumbar interbody fusion(PLIF) with threaded cage using two different approaches was performed on eighteen functional spinal units of bovine lumbar spines. The purpose of this study was to compare the segmental stiffnesses among PLIF with one long posterolateral cage, PLIF with one long posterolateral cage and simultaneous facet joint fixation, and PLIF with two posterior cages. Methods : Eighteen bovine lumbar functional spinal units were divided into three groups. All specimens were tested intact and with cage insertion. Group 1(n=12) had a long threaded cage($15{\times}36mm$) inserted posterolaterally and oriented counter anterolaterally on the left side by posterior approach with left unilateral facetectomy. Group 2(n=6) had two regular length cages($15{\times}24mm$) inserted posteriorly with bilateral facetectomy. Six specimens from group 1 were then retested after unilateral facet joint screw fixation in neutral(group 3). Likewise, the other six specimens from group 1 were retested after fixation with a facet joint screw in an extended position(group 4). Nondestructive tests were performed in pure compression, flexion, extension, lateral bending, and torsion. Results : PLIF with a single cage, group 1, had a significantly higher stiffnesses than PLIF with two cages, group 2, in left and right torsion(p<0.05). Group 1 showed higher stiffness values than group 2 in pure compression, flexion, left and right bending but were not significantly different. Group 3 showed a significant increase in stiffness in comparison to group 1 for pure compression, extension, left bending and right torsion(p<0.05). For group 4, the stiffness significantly increased in comparison to group 1 for extension, flexion and right torsion(p<0.05). Although there was no significant difference between groups 3 and 4, group 4 had increased stiffness in extension, flexion, right bending and torsion. Conclusion : Posterior lumbar interbody fusion with a single long threaded cage inserted posterolaterally with unilateral facetectomy enables sufficient decompression while maintaining a majority of the posterior elements. In combination with a facet joint screw fixation, adequate postoperative stability can be achieved. We suggest that posterolateral insertion of a long threaded cage is biomechanically an ideal alternative to PLIF.

• Journal of Korean Neurosurgical Society
• /
• 제30권11호
• /
• pp.1284-1290
• /
• 2001

Objective : PCB cervical instrument is a newly introduced fusion device which comprises cervical plate, cage (spacer) and screw system. It is developed to enhance fusion rate and stability, as well as to reduce complications related to hardware failure. We investigated the efficacy of clinical and radiological results of PCB instrument and Lubboc bone. Methods : From August, 1998 to October, 1999, authors performed 54 cases of anterior cervical interbody fusion with PCB instrument and Lubboc bone. Retrospective analysis was undertaken based on clinical and radiological findings. Clinical improvement was evaluated according to Odom's criteria. Cervical plain films and tomography were taken every 2 months to evaluate the degree of interbody fusion and disc height changes. Results : Bone fusion was observed in 36 cases(90%) over 6 months after operation, and during which time there was no significant interval change. There were 3 cases of hardware dislodgement. Disc height was increased significantly and preserved in all cases. Clinical outcome over good degree was seen more than 94% of patients. Conclusion : Longer follow-up period and comparative studies to similar instrument appear to be necessary, but this instrumentation system has shown high fusion rate and fewer adverse effects in our series. We believe this system might be indicated for the treatment of cervical trauma and degenerative disease in selective cases.

• Elastomers and Composites
• /
• 제43권4호
• /
• pp.241-252
• /
• 2008

올레인산으로 유기변성된 ZnAl-LDH(SO-ZnAl LDH)를 합성하여 브롬화 에폭시 수지(BER) 및 산화안티몬을 포함하는 난연 ABS 컴파운드에 첨가하였다. 난연 ABS 컴파운드는 동일방향으로 회전하는 이축압출기를 통해 제조되었고 난연성 및 기계적 성질을 측정하기 위한 시편으로 사출성형 되었다. ABS 나노복합재료의 XRD 패턴에서는 피크가 나타나지 않았다. SOZnAl LDH를 포함하는 난연 ABS 나노복합재료는 TGA 시험 결과 향상된 내열성을 보였다. 그러나, 난연 ABS 나노복합재료들은 UL 94 수직시험(1.6 mm 두께)시 등급을 얻지 못했다. BER를 1.5 wt% 이상 더 첨가한 경우들에서만 UL 94 V0 등급을 얻을 수 있었다. SO-ZnAl LDH의 첨가량에 비례하여 난연 ABS 나노복합재료의 노치드 아이조드 충격강도, 인장탄성률 및 신율은 증가하였으나 유동지수는 감소하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.907-916
• /
• 2020

This research was conducted to investigate the linear expansion and resistance properties of a composite board (com-ply). This board was made of medium-density fiberboard (MDF) laminated using avocado (Persea americana), mahogany (Swietenia mahogani), and pine (Pinus merkusii) veneers. These three types of veneers were laminated on both surfaces of the MDF using adhesives, namely, epoxy and isocyanate. Glue (250 g·m^-2) was spread on the surface, followed by cold press for 3 h with an applied pressure of 15 kg·cm^-2. The research result revealed that com-ply exhibited an increased dimensional stability compared with MDF, indicated by reduction in water absorption, thickness swelling, and linear expansion. The com-ply made of the pine veneer and isocyanate adhesive exhibited high density, water absorption, thickness swelling, and screw withdrawal load. The com-ply that exhibited the strongest resistance to drywood termite attacks was the one made of the mahogany veneer and isocyanate adhesive. Moreover, the com-ply that exhibited the biggest weight loss (3.6 %) was made of the pine veneer and epoxy adhesive. The results of this research may facilitate in manufacturing com-ply using the selected veneer and adhesive without the application of hot press.

• 한국식품과학회지
• /
• 제20권5호
• /
• pp.666-673
• /
• 1988

쌀을 기질로 하는 유산균 음료 발효에서 Bacillus와 효모의 혼합배양을 이용한 고체상태 예비발효와 extruder를 이용한 압출조리 전처리가 유산균의 생육을 증진하는 효과에 대하여 검토하였다. Bacillus laevolacticus와 Saccharomyces cerevisiae의 혼합배양을 쌀과 탈지 대두분의 혼합물에 접종하여 고체 상태로 $45^{\circ}C$에서 배양한 후 자가발열형 단일축 압출성형기를 통하여 처리함으로서 살균과 조직의 변화를 도모하였다. 이렇게 처리된 물질을 분산액으로 만들어 Lactobacillus plantarum과 Leuconostoc mesenteroides 혼합배양을 접종하여 유산발효시켰다. 예비발효와 압출조리에 의하여 유산균의 증식속도와 산생성이 증가하였으며 가용성 고형분의 함량이 크게 증가하였고 분산안정성이 향상되었고 관능적 기호도도 증가하였다.

• Journal of Korean Neurosurgical Society
• /
• 제63권2호
• /
• pp.202-209
• /
• 2020

Objective : The purpose of this study was to evaluate the efficacy of the anterior approach following intraoperative reduction under general anesthesia in patients with cervical facet fracture and dislocation. Methods : Twenty-three patients with single level cervical facet fracture and dislocation who were subjected to the anterior approach alone following immediate intraoperative reduction under general anesthesia from March 2013 to December 2017 were enrolled in this study. Neurological status, clinical outcome, and radiological studies were evaluated preoperatively, postoperatively, and during the follow-up period. Results : The cohort comprised 15 men and eight women with a mean age of 57 years (from 24 to 81). All patients were operated on within the first 8 hours following the injury. After gentle manual reduction or closed reduction with Gardner-Wells traction, under general anesthesia monitored by somatosensory-evoked potentials, all operations were successfully completed using the anterior approach alone except in two patients, who had a risk of over-distraction. In them, a satisfactory gentle manual reduction or closed reduction was not possible, and required open posterior reduction of the locked facets followed by anterior cervical discectomy and fusion. In one patient, screw retropulsion was observed in 1 month after surgery. There were no reduction-related complications or neurological aggravations after surgery. All patients showed evidence of stability at the instrumented level at the final follow-up (mean follow-up, 12 months). Conclusion : Anterior approach following intraoperative reduction monitored by somatosensory-evoked potentials under general anesthesia for cervical dislocation and locked facets is a relatively safe and effective alternative when cervical alignment is achieved by intraoperative reduction.