• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.355-359
• /
• 2020

In this study, image analysis and surface roughness measurements using an optical microscope are presented as a method to quantitatively evaluate the results of screen printing. Using this method, the squeegee speed, which is the printing process condition, and the printability of the electrode according to the screen mesh were evaluated. Increasing the squeegee speed in the printing process acts as a process element that increases the line width precision of the printed electrode and lowers the surface roughness of the printed surface. Furthermore, the edge roughness, which indicates the clarity of printing, was not significantly affected by the speed of the squeegee during printing. The print thickness increases in proportion to the squeegee speed, but is largely dependent on the screen thickness.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.51-64
• /
• 2013

When it comes to current growth trend for the printing process in Asia printing market, offset printing, gravure printing and screen printing are reduced respectively -4%, -19%, -55%. In judging from the fact, the change in the printing production system from mass production on small amount to small production on mass amount is the biggest issue. For this reason, digital printing shows the significant growth. According to the increase of the growth 78% for electro photography way and 67% for ink-jet, it's not enough to catch up with digital printing which is increasing as time goes by to equip with hardware like as digital press. There's been necessary to install the BOD(Book on Demand) system which is the advanced and regular publication edit solution based on web-to-print model in the prepress, and it has made the BOD system be considered in relation to maximization of efficiency and production. Therefore, this research tries to step forward from the POD concept, which is refired to "Print along with the ordered quantities, the ordered appropriate time and the demanded place", so that it could expand the range of the printing/publishing environment using the BOD system, the order-made publication based on automatically operating template. And it tried to make the relation to digital web press on ink-jet method which is adequate to "mass production on small amount" with such advanced concept. This research also aims to use actively BOD solution model to promote the productivity of labor, and then to produce the printings across all related industries, which means to manufacture maximally the products on the shortest time at minimum place through PC equipments.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.293-298
• /
• 2011

The most widely used method to form an electrode in industrial solar cells are screen printing. Screen printing is characterized by a relatively simple and well-known production sequence with high throughput rates. However the method is difficult to implement a fine line width of high-efficiency solar cells can not be made. The open circuit voltage(Voc) and the short circuit current density(Jsc) and fill factor(FF) need to be further improved to increase the efficiency of silicon solar cells. In this study, gravure offset printing method using the multicrystalline-silicon solar cells were fabricated. Gravure off-set printing method which can print the fine line width of finger electrode can have the ability reduce the shaded area and increase the Jsc. Moreover it can make a high aspect ratio thereby series resistance is reduced and FF is increased. Approximately $50{\mu}m$ line width with $35{\mu}m$ height was achieved. The efficiency of gravure off set was 0.7% higher compare to that of scree printing method.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.9
• /
• pp.20-25
• /
• 2010

The effect of micro surface structure on printing for printed electronics has been studied experimentally. The photolithography MEMS fabricationwass used to make a SU-8 molder which has micro structures on the surface, and the PDMS micro structure was fabricated by the PDMS molding method. In the aspect of printed electronics, we used silver paste conductive ink. We measured the surface energy variation on pillar microstructure. The microstructure was used to real printing experiment by a screen printing. We printed 1cm micro lines which have $30{\sim}250{\mu}m$ width, and checked the conductivity to sort out opened line pattern. Printability was defined by success probability of printed patterns and we found that the present microstructures improve the printability significantly.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.173-178
• /
• 2007

Carbon nanotube cathodes(CNT cathodes) with a trench structure similar to gated structure of triode-type cathode were fabricated by a screen printing method using multi-walled carbon nanotubes. The effects of surface treatments on CNT cathodes were investigated for high efficiency field emission displays(FEDs). A liquid method easily removed the organic residue and protruded the CNTs. Field emission properties were measured by using a diode-type mode. The liquid method produced a turn-on field of $1.4V/{\mu}m$. The emission current density was measured about $3.1mA/cm^{2}$ at the electric field of $3V/{\mu}m$. The liquid method showed a high potential applicable to the surface treatment for triode-type FEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.486-489
• /
• 2007

Carbon nanotube (CNT) cathodes having a trench structure similar to the structure of the gated triodetype cathode were successfully fabricated by a screenprinting method with multi-walled carbon nanotubes. We observed that a liquid method not only readily removes the organic residues on the CNT films, but also satisfactorily protrudes the CNTs out of the electrode surface. The CNT cathodes prepared by the liquid method showed a turned-on field of $1.4\;V/{\mu}m$. The emission current density of them was about $3.1\;mA/cm^2$ at the electric field of $3\; V/{\mu}m$. The liquid method appears to be a promising surface treatment of CNT cathode for gated triode-type FEDs applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.4
• /
• pp.294-299
• /
• 2000

For practical application as a humidity sensor SnO$_2$thick films devices were fabricated on the refresh type electrode by screen printing method and their material and humidity sensing properties were investigated. As a function of Sb$_{2}$/O$_{3}$ addition rate grain size was increased while porosity and initial resistance were rapidly decreased. And the area of resistance variation according to relative humidity was decreased with increasing heat treatment temperature. SnO$_2$thick film device heat treated at 95$0^{\circ}C$ and contained 0.05mole% Sb$_{2}$/O$_{3}$ had a best humidity sensing properties. From this result it is conformed that humidity sensing properties of SnO$_2$thick film devices could be approved by very small amount of Sb$_{2}$/O$_{3}$ addition.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.22 no.3
• /
• pp.173-188
• /
• 2011

This research intended to identify empirical recommendations for designing the DAISY service interface and used a case-based method. The case of this research was LG Digital Talking Book Library(http://voice.lg.or.kr) of LG Sangnam Library. A group of experts evaluated the current DAISY interface serviced by the web. After evaluation, major recommendations were suggested and these recommendations were used to develop the new DAISY Interface. Major recommendations were consideration of the reading flow of the screen-reader program, prevention of perception as an error about the time delay, development of web-based software, support for convenient functions and prevention of shortcut key overlap and so on.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.45-56
• /
• 2012

Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.3
• /
• pp.147-156
• /
• 2012

Most people in our society use credit card instead of cash or check, so credit card is very important economic method. Credit card supposed to be safe, but hackers hack credit card for illegal deal. Also hackers make fake credit card and issue fake credit card to other people. In this thesis it will study and analyze damage case for safe credit card deal. It will use safe credit card system to insert variety of information and data of using pattern in artificial intelligence network, so print out the possibility of risk and monitor the risk of credit card user's deal pattern, so if one of user's pattern is different than normal pattern, it will pop up message in consultant's screen. This thesis will study and suggest way of prevent from illegal deal and user friendly credit card checking system.