• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.203-210
• /
• 2019

Most cars today use electronic control to control the state of the engine to achieve optimum performance. This study developed a device for maintaining fault diagnosis and optimal vehicle status by displaying the engine information of a car on the screen in real time using can communication. This system displays information generated from the engine to the driver in real time such as engine intake and exhaust temperature, current battery voltage, tire pressure, RPM, DPF collection amount, torque, and horsepower through the OBD2 socket. You can check immediately. It can help you to drive safely by measuring tire pressure and displaying it on the screen, and it provides a mode to set the shift timing to suit your taste. In particular, in the case of diesel engine cars, the problems caused by smoke can adversely affect the performance and environmental pollution. Therefore, the system was developed to display the DPF collection amount on the system screen to prevent environmental pollution and to manage the vehicle efficiently.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.392-395
• /
• 2003

For the purpose of digital x-ray imaging, many materials such as $PbI_2$, $HgI_2$, TlBr, CdTe and CdZnTe have been under development for servaral years as direct converter layer. $Hgl_2$ film detector have recently been shown as one of the most promising semiconductor materials to be used as direct converters in x-ray digital radiography. This paper, the $HgI_2$ films are deposited on conductive-coated glass by screen printing, in which $HgI_2$ powder is embedded in a binder and solvent, and the slurry is used to coat the conductive-coated glass. We investigated electrical characteristic of the fabricated $HgI_2$ films. The x-ray response to radiological x-ray generator of 70Kvp using the current integration mode will be reported for screen printing films. These results indicate that $HgI_2$ detectors have high potential as new digital x-ray imaging devices for radiography.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.3
• /
• pp.17-24
• /
• 2019

This study aimed to develop a mobile separating and sorting device for discharge sites to separate and sort mixed construction waste generated in small and medium scale in small provincial cities into inorganic materials and combustible materials. The study results can be summarized as follows: 1) As a result of analyzing the existing domestic technology for the separating and sorting mixed construction waste, a device sorting the waste by fusing the vibration screen, disc screen, air blowing methods and the separating and sorting the combustible waste is applied in Korea. 2) In foreign countries, the air blowing, screen, gravity sorters are used for separating and sorting combustible waste in the same way as in Korea. Especially German T Company suggests a construction waste separating and sorting system using an optical sorter. 3) As for the test device for separating and sorting mixed construction waste to be buried in landfill, the processing capacity was set as 16 tons per day. 4) For separating and sorting inorganic materials by granularity, this study set a trommel with two types of diameter as a basic. To operate the mobile all-in-one system, the device is designed to locate a conveyor, a combustible waste conveying device, inside of the trommel. 5) The device is designed in a mobile mode under the concept of primary separating and sorting device, and it can be transported using a 2.5-ton truck minimum. The diameter and length of the trommel are designed to be within 1500mm and 3000mm, respectively. In a further study, an optimized separating and sorting technology is planned to be presented through an experimental study for processing efficiency analysis at the mixed construction waste site by manufacturing the pilot experiment facility reflecting the design elements in the result of this study.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.71-76
• /
• 2017

The electrical behavior and flexibility of the screen printed Ag circuits were investigated with infrared radiation sintering times and sintering temperatures. Electrical resistivity and radio frequency characteristics were evaluated by using the 4 point probe measurement and the network analyzer by using cascade's probe system, respectively. Electrical resistivity and radio frequency characteristics means that the direct current resistance and signal transmission properties of the printed Ag circuit. Flexibility of the screen printed Ag circuit was evaluated by measuring of electrical behavior during IPC sliding test. Failure mode of the Ag printed circuits was observed by using field emission scanning electron microscope and optical microscope. Electrical resistivity of the Ag circuits screen printed on Pl substrate was rapidly decreased with increasing sintering temperature and durations. The lowest electrical resistivity of Ag printed circuit was up to $3.8{\mu}{\Omega}{\cdot}cm$ at $250^{\circ}C$ for 45 min. The crack length arisen within the printed Ag circuit after $10{\times}10^4$ sliding numbers was 10 times longer than that of after $2.5{\times}10^4$ sliding numbers. Measured insertion loss and calculated insertion loss were in good agreements each other. Insertion loss of the printed Ag circuit was increased with increasing the number of sliding cycle.

• Journal of the HCI Society of Korea
• /
• v.7 no.2
• /
• pp.49-56
• /
• 2012

The camera-based mobile applications such as color, pattern and object reading can improve the living quality of blind people. However currently available camera-based applications are uncomfortable for the blind, since these applications do not reflect accessibility requirements of the blind especially on touch screen. We investigated accessibility requirements about rapidly growing camera-based mobile applications on touch screen devices for the blind. In order to identify accessibility requirements, we conducted a usability testing for color reading applications with three different types of interfaces on Android OS. The results of the usability testing were as follows: (1) users preferred short depth of menu hierarchy, (2) the initial audio help was more useful than just-in-time help, (3) users needed both manual and automatic camera shooting modes although they preferred manual to automatic mode, (4) users wanted the OS supported screen reader function to be turned off during the color reading application was running, and (5) users required tactile feedback to identify touch screen boundary. We designed a new user interface for blind people by applying the identified accessibility requirements. From a usability testing of the new user interface with 10 blind people, we showed that the identified accessibility requirements were very useful accessibility guidelines for camera-based mobile applications.

• The Journal of the Korea Contents Association
• /
• v.18 no.8
• /
• pp.92-101
• /
• 2018

As the interactive AI speaker becomes popular, voice recognition is regarded as an important vehicle-driver interaction method in case of autonomous driving situation. The purpose of this study is to confirm whether multimodal interaction in which feedback is transmitted by auditory and visual mode of AI characters on screen is more effective in user experience optimization than auditory mode only. We performed the interaction tasks for the music selection and adjustment through the AI speaker while driving to the experiment participant and measured the information and system quality, presence, the perceived usefulness and ease of use, and the continuance intention. As a result of analysis, the multimodal effect of visual characters was not shown in most user experience factors, and the effect was not shown in the intention of continuous use. Rather, it was found that auditory single mode was more effective than multimodal in information quality factor. In the semi-autonomous driving stage, which requires driver 's cognitive effort, multimodal interaction is not effective in optimizing user experience as compared to single mode interaction.

• Korean Journal of Oriental Medicine
• /
• v.18 no.3
• /
• pp.31-38
• /
• 2012

Jo Taek-seung(曺澤承, 1841-1907), who devoted himself to medical science mostly living in Haenam, and his son Jo Byeong-hu(曺秉侯, 1869-?) are significant in the history of Korean oriental medicine. The medical science of Jo Taek-seung appointed as Jusa(主事) of Hyeminwon(惠民院) in 1902 was handed down to his only son Jo Byeong-hu, who succeeded to his father's medicine and polished up the medicine, and recorded the results "Sanghangyeongheombangyochwal(傷寒經驗方要撮)" in 1933. Jo Taek-seung's portrait has been handed down to Jo Taek-seung's descendents' house in Munane-ri, Haeman. Not only does Jo Taek-seung's portraits well present the features of portrait mode of Joseon Dynasty period in the 19th century in their front view, exposure of two hands, expressive mode, background articles, etc, but also praises, poems, etc. giving information on manufacture intent, etc. to give prominence to the authors recorded by Jo Taek-seung, time of manufacture and position of medical official appears in one screen. In this paper, through disaster-removing poetic sentence showed in Jo Taek-seun'sg portraits, it was found that the author of the portrait is Choi Byeong-uk who worked mostly staying in Seoul and the present portrait was the one re-painted in 1907 by revising the portrait painted in 1894 when Jo Taek-seung was 54 years old, after Jo Taek-seung died. With regard to revised portion, presuming through records on the picture and comparative analysis of mode with portraits of doctors in the 20th century, it seems that the clothing of Confucian scholars in the first version was revised into the clothing of medical officials showing the position of Jo Taek-seung who took office as Jusa of Hyeminwon at the time of re-painting the portrait. Jo Taek-seung's portrait not only becomes important materials in the oriental medicine and historical world in the aspect of manufacture process, mode, etc. of Korean portraits including an aspect of medical official's portraits, but has significant meaning from the aspect of fine art history or clothing history.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1281-1288
• /
• 2012

This paper presents the design and implementation of a multi-mode mobile broadcasting Emergency Warning System (EWS) transmission and reception system which enables the propagation of disaster information using the encoding and transmission, reception and decoding methods specified in diverse mobile broadcasting standards. The implemented system supports global mobile broadcasting standards such as Terrestrial Digital Multimedia Broadcasting (T-DMB), Digital Video Broadcasting-Handheld (DVB-H), Integrated Services Digital Broadcasting-Terrestrial (ISDB-T), and the Digital Radio Mondiale (DRM) digital radio standard. The system consists of two key part: an encoding/transmission part and a reception/decoding part. The multi-mode mobile broadcasting EWS encoding and transmission system generates EWS data according to each broadcasting specification. The generated EWS data is then transmitted through a channel interface which meets the commercial broadcasting equipment specification. The receiver system receives and decodes the EWS data on a single hardware platform and can display the results on screen. Verification and conformity testing has been carried out on the implemented system by transmitting emergency data for each mode in real-time and displaying the received information in text on the receiver display.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.539-552
• /
• 2022

In the case of train stations, due to the specificity of underground spaces with limited smoke emissions, if appropriate removal equipment is not equipped, the damage caused by fire smoke may increase in the event of a fire. As a result, the need for measures to ensure the safety of evacuation of underground stations has been highlighted, and research for safe evacuation of platform users in case of fire is continuously being conducted at home and abroad. However, although the smoke removal area is currently divided by smoke boundary walls and platform screen doors (PSD) and installed in the train platform, standards for smoke removal methods (air supply or exhaust) for each fire removal area, that is, smoke removal mode, are not presented. In this study, fire analysis and evacuation analysis were performed to estimate the number of deaths and to derive F/N guidance in order to quantitatively evaluate the fire risk according to the fire station fire, and the total risk was the lowest in the case of fire area exhaust and supply to adjacent areas.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.47-58
• /
• 2022

This research presented development contents for application of realistic content approach study that can experience T-ball sports used in regular physical education classes at indoor space with screen. The scope of application can be used for ball sports training in virtual reality sports room of elementary and junior high schools. The approach process presents an appropriate approach system for sustainable training education which is to improve T-ball sports training to target users through consultation-based collaboration with sports experts and T-ball leaders, focusing on basic training content of T-ball textbooks. In other words, the training mode was designed to induce immersion in T-ball sports classes and provide natural basic training for students at elementary schools rather than simply experience-based realistic content. The developed training content provided basic attack training according to weekly differentiated curriculum, and the approach process of training mode by difficulty level was presented to allow the user to improve the training by the degree of difficulty. In addition, the match mode approach process that reflects the game rules of T-ball sports was presented. This study can be presented as a reference production case that can be used to improve basic training and physical exercise of ball sports for industries related to development of realistic content.