• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.345-348
• /
• 2006

The piezoelectric thick films were fabricated on silicon substrates by screen printing method. By developing a low-temperature sinterable piezoelectric composition and a new poling technique, we fabricated the high-performance piezoelectric thick films on silicon which can be applied for piezoelectric MEMS applications such as micropumps of the ink jet printer heads.

• 한국정보통신학회논문지
• /
• 제23권12호
• /
• pp.1742-1745
• /
• 2019

Hidden flame detection after allegedly extinguishing a fire cannot be emphasized enough. There are a few commercial hidden fire detection equipments which are imported, but the cost is relatively high. In this contribution, we propose a development of a low-cost, high-performance hidden flame detector using open-source hardware/software. We use Raspberry-pi based hardware board equipped with a TFT touch-screen LCD, a 3G modem, and an attachable battery device altogether integrated in a plastic case fabricated with a 3D printer. The proposed hidden flame detector shows the same performance of a commercial product FLIR E5 while consuming less than a half of the cost.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.313-321
• /
• 2022

5G기술의 발전과 함께 실감형 콘텐츠에 대한 관심이 커지고 있다. 영화 속에서나 가능했던 홀로그램과 같은 실감형 콘텐츠가 현실에서도 구현될 것이라는 전망이 나오고 있다. 1948년 데니스 가버가 기본 이론을 발표한 이후로 오랜 기간 연구되어 온 홀로그램 분야도 디지털 기술을 접목하여 새로운 방향으로 발전을 계속하고 있다. 빛의 간섭패턴을 기록하여 제작하는 전통적인 광학식 홀로그램으로부터 컴퓨터 형성 홀로그램 (computer generated hologram, CGH)과 디지털 홀로그램 프린터 분야로 발전하고 있다. 디지털 홀로그램 프린터를 이용해 홀로그램을 제작하기 위해서는 우선 여러 장의 다시점 이미지를 이용하여 호겔 (holographic element, Hogel) 이미지를 생성해야 한다. 연속된 다시점의 이미지를 획득하는 방법으로는 실사를 직접 촬영하는 방법과 3D 그래픽 제작 도구를 이용하여 오브젝트를 모델링하고 가상 카메라의 움직임을 렌더링하는 방법이 각각 사용되고 있다. 본 논문에서는 새로운 이미지 획득 방법으로 시각효과 (visual effect, VFX) 기법 중 한 가지인 크로마키 합성 기술을 이용해 다시점 이미지를 제작하는 방법을 제안한다. 실사를 그린 스크린 위에 배치하여 촬영하고, 3D 컴퓨터 그래픽 (comuter graphic, CG) 배경과 합성을 하는 전체 워크플로우를 제시하고, 각 단계의 역할을 설명한다. 제시된 워크플로우의 전체나 일부를 응용하면 추후 새로운 이미지 획득 방법을 연구하는 데에 도움이 될 것으로 기대한다.

• 센서학회지
• /
• 제19권2호
• /
• pp.149-154
• /
• 2010

Top of the alumina body which is made according to plan has been printed using a screen printer equipment in order to print an electrode pattern. The electrode is connected with the quartz crystal oscillator of the piezoelectricity method which has a piezoelectric characteristic. The pressure contact department has been experimented using three type of the teflon. The teflon is good for pressure delivery vector but it is bad restitution. So we devised the structure which inserts the metal in the teflon. Bottom of the module is connected with the signal processing department which is planned in advance and then has investigated to characteristic. Therefore we have got the best output-voltage and frequency characteristic follows in the pressure.

• 전자공학회논문지
• /
• 제54권7호
• /
• pp.55-60
• /
• 2017

본 논문은 컴퓨터의 보안향상을 위한 차동펄스를 이용하여 상호정전용양 터치스크린 패널의 지문인식 송신법을 제안한다. 차동펄스생성기와 Ring-Counter로 구성되어 있으며, 공급전압은 5V이다. 제안된 시스템의 출력파형은 In-Phase 와 Out of Phase의 구성되었으며, 2ms의 동안에 1MHz가 포함된 펄스를 출력한다. 4개의 채널을 구동할 수 있는 구조로 설계되었으며 전체 전력소모량은 약 78.08nW 이다. 본 시스템은 TSMC 0.25um CMOS 공정으로 설계 되었고, Chip Area는 $870um{\times}880um$이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.5-7
• /
• 2010

Corrosion sensors were devised to develop a system whereby the depth of chloride permeation from concrete surfaces can be monitored in cover concrete of reinforced concrete structures. For making sensor which is similar to rebar author uses Screen printer machines, Ag paste and Fe powder. Appropriate portion of Ag and Fe is over 1:2. The resistance of sensors increased as the degree of corrosion increased. And according to cover depth author suggests sensor system which has a demanded cover depth. It was therefore confirmed that the corrosion sensor can monitor chloride permeation by change of resistance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.481-483
• /
• 1989

This paper is concentrated on the recognition of Korean Digits. The speech signals of each of digits are fed into computer through the 18 bandpass filters, AD converter. Spectrum input data are analyzed and used. BASIC program language is used for recognition performance and the result of recognition is outputed to computer screen and printer. In this paper, the strength and weakness of filter-bank analysis method is described and the technique of real-time recognition is argued. In this experiment, Ratio of recognition for speaker dependent recognition was about 97% and recognition time was also satisfied. Therefore, A way of speaker independent recognition will be presented and using for special communication in the future.

• 전자공학회논문지A
• /
• 제29A권2호
• /
• pp.100-106
• /
• 1992

In this pape, we designed and implemented a hardware accelerator for the generation of bit map font from Hangul outline font description for LBP (Laser Beam Printer) and screen applications Whole system was implemented as a double size PC/AT application board which consists of processing bolck and display block. The processing block has a master processor (MC68000)and two slave processors which are MC56001 and KAFOG chip responsible for the short vector generation. In the display block, TMS34061 was used for monitor display and GP425 was used for LBP print out. The resolution of the monitor is 640$\times$480 and that of LBP is 2385$\times$3390. The current system called KHGB90-B generates about 100 characters per second where each character consists of 32$\times$32 bits

• 한국가정과교육학회지
• /
• 제4권1호
• /
• pp.1-15
• /
• 1992

The aim of the research is to develop a PC based courseware which is programed to drafts clothing patterns. The pattern making are numerically formulized. The of the program were as follows；1. Menu and instructions are displayed in Korean Language. 2. Easy step-by-step instructions explaining how to draw basic pattern and design pattern. 3. Low cost personal computer and general purpose printer are used. The source program was written in C-language and compiled using Turbop C. The Bezier spline is used to draw curves of pattern and to display Korean characters and pattern on same screen simultaneoulsy, Korean characters are drawn graphically. The low cost IBM Personal Computer or compatibles with Hercules Graphic Card is required to run this grogram.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.302-302
• /
• 2000

This paper presents the measurement and correction of PCB alignment errors for PCB-manufacturing machines. The conventional PCB-manufacturing machine doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because of alignment errors of PCB loaded to the PCB-manufacturing machine. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors whit high-accuracy. An automatic optical inspection part measures the PCB alignment error using two cameras, and the high-accuracy 3-axis stage makes correct of these error. The operating system is run in the environment of Window 98 (or NT). Finally we implemented this system to PCB screen printer and PCB exposure system.