• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.639-644
• /
• 2008

Purpose: The aim of this study was to compare the number of live and dead bacteria attached to, or within, the stratified squamous epithelium lining the tissue side of the gingival sulcus. Materials and Methods: A total of 50 patients was examined and classified into healthy or diseased sites according to inflammatory status of the gingival tissue. The surface of stratified squamous epithelium was removed by gentle scraping of the gingival sulcus with curettes. The cells were processed in the laboratory by density-gradient centrifugation to separate the epithelial cells from the loose bacteria and debris. The LIVE/$DEAD^{(R)}$ $BacLight^{TM}$ Bacterial Viability Kit was applied and the specimens were observed by an epifluorescent microscope and the number of bacteria was counted. Results: Live and dead bacteria were stained to green and red, irrespectively. Generally, the number of total bacteria in the diseased sites was significantly higher than in the healthy sites. The mean number of detected bacteria in the diseased sites was $58.6{\pm}36.0$ (red bacteria $10.4{\pm}9.2$ / green bacteria $48.2{\pm}30.5$), while it was $1.5{\pm}1.7$ in the healthy sites (red bacteria $0.1{\pm}0.3$ / green bacteria $1.4{\pm}1.5$). The percentage of red bacteria was $17.5{\pm}11.2%$ in the diseased sites and $2.0{\pm}5.8%$ in the healthy sites. Conclusion: The total number of bacteria in the diseased sites was significantly higher than that of the healthy sites. The ratio and the number of red bacteria were also significantly higher in the diseased sites.

• Korean Journal of Veterinary Research
• /
• v.29 no.3
• /
• pp.325-331
• /
• 1989

Five hundred and forty-eight samples of pig heart muscle were collected from the abattoirs of many regions in Korea to reveal the frequency of Sarcocystis infections and to identify the species from June 1988 to April 1989. Heart muscle of the pigs was inspected for sarcocysts by the direct detection technique and for bradyzoites by the trypsin digestion technique. For examination of development of the parasites in the final host, 5 cross bred mature dogs, 5 puppies and 5 kittens were fed 100g, 50g and 50g of the infected meat respectively, four times in 2 days. Of 402 fattened and 146 older culled breeding pigs, 3 fattened pigs and 39 culled pigs were positive for Sarcocystis. Sarcocystis cysts from heart muscle measured an average of $425{\times}169{\mu}m$ and bradyzoites an average of $15.6{\times}3.5{\mu}m$. Of 15 animals, only 2 puppies were infected with Sarcocystis. The prepatent period was 11 to 12 days and patent period was not examined since the puppies were infected with some another infections and one died on day 11 and another died on day 12 after ingestion of the meat. The sporulated oocysts were detected 11 days after ingestion of the meat and sporocysts 12 days from the puppy feces. The sporulated oocysts measured an average of $16.5{\times}11.5{\mu}m$ and sporocysts an average of $12.6{\times}7.9{\mu}m$. On scraping examination of the intestinal mucosa, fully sporulated oocysts were detected in the tip of the intestinal villi. Considering above all descriptions, Sarcocystis in pig heart muscle in Korea was identified with Sarcocystis suicanis.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.334-408
• /
• 2006

In Hong Kong, large-diameter (${\ge}600mm$) bored piles and large-section excavated rectangular barrettes are commonly used to support tall buildings to resist both vertical and horizontal loads. These piles and barrettes penetrate through and may found in saprolitic soils and decomposed rocks. Generally, the design of these large bored piles and barrettes involves considerable amount of uncertainty and design parameters must usually be verified by field tests. In this paper, over 50 full-scale load tests on large-diameter bored piles and over 15 large-section of rectangular barrettes in Hong Kong are reviewed and interpreted critically, in particular the degree of mobilisation of side shear resistance using a mobilization rating (MR) factor and a displacement index (DI) for floating bored piles and barrettes and rock-socketed piles, respectively. The author was heavily involved with many of these load tests. The diameter of the bored piles tested ranges from 0.6m to 1.8m and the depth varies from 12m to 75m. Sizes of barrettes critically reviewed include $2.2m{\times}0.6m,\;2.2m{\times}0.8m,\;2.8m{\times}0.8m\;and\;2.8m{\times}1.0m$ (on plan) and the depth varies from 36m and 63m. Based on these field tests, a new failure load criterion for large-diameter bored piles and barrettes is developed and proposed. The side shear resistance of the bored piles and barrettes is quantitatively analyzed with respect to local displacements, standard penetration tests, unconfined compressive strength (UCS) for rock sockets and using the effective stress principle. In addition, the effects of construction including post-grouting, construction time, side scraping and excavation tools on side shear resistance are investigated and reported.

• Parasites, Hosts and Diseases
• /
• v.34 no.4
• /
• pp.267-278
• /
• 1996

A clinical case of CheMletietlo infestation on a dog born and raised in Korea is reported. A three-year old female Whippet was hospitalized due to a multiple fracture and displacement of the left scapula caused by a recent car accident The mite infestation was not noticed at the time of hospitalization. The dog underwent multiple operations involving internal fixation of the fractured scapula with wire and a plate, followed by extensive chemotherapy with antibiotics and prednisolone. After two months of hospitalization. a pruritic dermatitis near the left scapula developed. Multiple white dandruff-like ilakes were seen on the hair coat. especially over the dorsal spine and neck, and the dog expressed increased pruritus by frequently licking and scratching the affected areas. Local dense accumulations of skin debris that became crusty were also observed. Microscopic examination or a skin scraping revealed a heavy infestation of cheyletiella vnsfuri. as idrntified by the prrsrnce of holes of the palpi and the heart-shaped sensory organ on menu I. Immnosuppression elicited by the extensive administration of prednisolone was suspected for the initiation of the generalized mite infestation.

• Tribology and Lubricants
• /
• v.35 no.6
• /
• pp.330-336
• /
• 2019

Conditioning is a process involving pad surface scraping by a moving metallic disk that is electrodeposited with diamond abrasives. It is an indispensable process in chemical-mechanical planarization, which regulates the pad roughness by removing the surface residues. Additionally, conditioning maintains the material removal rates and increases the pad lifetime. As the conditioning continues, the pad profile becomes unevenly to be deformed, which causes poor polishing quality. Simulation calculates the density at which the diamond abrasives on the conditioner scratch the unit area on the pad. It can predict the profile deformation through the control of conditioner dwell time. Previously, this effect of the diamond shape on conditioning has been investigated with regard to microscopic areas, such as surface roughness, rather than global pad-profile deformation. In this study, the effect of diamond shape on the pad profile is evaluated by comparing the simulated and experimental conditioning using two conditioners: a) random-shaped abrasive conditioner (RSC) and b) uniform-shaped abrasive conditioner (USC). Consequently, it is confirmed that the USC is incapable of controlling the pad profile, which is consistent with the simulation results.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.581-586
• /
• 2017

For automatic web scraping, unnecessary components such as menus and advertisements need to be removed from web pages and main contents should be extracted automatically. A content block tends to be located in the middle of a web page. In particular, Korean web documents rarely include metadata and have a complex design; a suitable method of content extraction is therefore needed. Existing content extraction algorithms use the textual and structural features of content blocks because processing visual features requires heavy computation for rendering and image processing. In this paper, we propose a new content extraction method using the tag positions in HTML as a quasi-visual feature. In addition, we develop a tag rank position, a type of tag position not affected by text length, and show that gradient boosting with the tag rank position is a very accurate content extraction method. The result of this paper shows that the content extraction method can be used to collect high-quality text data automatically from various web pages.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.25-29
• /
• 2003

Nickel-ferrite $Ni_xFe_{3-x}O_4$ thin films with several composition for Ni on glass substrate was prepared by ferrite plating method in order to make sunglass which cut off ultraviolet and shield electromagnetic field. It has single phase of polycrystalline spinel structure and has gloss as mirror and has high hardness which is no scratch while scraping by using nail. The transmittance of nickel-ferrite thin film is lowered to zero below 400 nm manifestly. And it shows that the nickel-ferrite thin film in nickel composition rate x = 0.09 was most cut oil ultraviolet when compared with goods of other company in the cut off effect of ultraviolet. Therefore, sunglasses coated with $Ni_xFe_{3-x}O_4$ thin film can be used in removing ultraviolet and electromagnetic field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1466-1473
• /
• 2012

Soft icecream is made by scraping an ice formed on the inside of the cylindrical evaporator, where R-404A is evaporating in the annulus. The heat transfer characteristics of the refrigerant evaporation and those during icecream formation were experimentally investigated. Results show that the refrigerant-side heat transfer coefficients are highly dependent on the location in the evaporator due to the complex annulus configuration. The heat transfer coefficient at the inlet is generally lower than those of other locations. The average heat transfer coefficient increases as heat flux increases or saturation temperature decreases. A correlation is developed to predict the refrigerant-side heat transfer coefficient. The icecream-side heat transfer coefficient oscillates continuously due to the periodic removal of ice formed on the surface. The average heat transfer coefficient during icecream formation is approximately 280 W/$m^2K$, and that during single-phase cooling increased from 150 W/$m^2K$ to 250 W/$m^2K$.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.9-18
• /
• 2002

Printed wiring boards(PWBs) of the obsolete computers are composed of various organic and inorganic compounds as well as metals and alloys. As convinced that the valuable metals obtained from the PWBs are effectively utilized as secondary resources when recovered by economical methods, in this study, an investigation for characterizing the physical separation techniques is conducted. For the recovery of them, the sockets and chips dismantled from PWBs by scraping and residual resin boards are subjected to the appropriate separation processes according to the physical properties of each part. In the case of crushed socket scraps size ranged from -2.36 mm to +1.18 mm, approximately 97 wt% of the product obtained by magnetic separation consists of metallic compounds. In the case of chip scraps, 97% of Fe-Ni alloy and 95% of Cu metal are recovered by the combined process of air classification and dry magnetic separation in the size range from -2.36 mm to +0.15 mm. Ball milling is adopted in order to improve the removal efficiency of the thin-printed metallic materials on the residual resin boards and approximately 77% of Cu metal is recovered by zigzag separation after ball milling.

• Journal of Veterinary Clinics
• /
• v.20 no.2
• /
• pp.242-244
• /
• 2003

A 3-year-old, male, mongrel dog was presented with pruritus, alopecia to the Veterinary medical Teaching Hospital, College of Veterinary Medicine of Kyungpook National University. On physical examination, generalized erythema, papules, scales and crusts were observed. The canine scabies infestation was diagnosed by deep skin scraping and Malassezia spp. and Staphylococcus spp. were found on skin cytology. He was treated with selamectin at 6 mg/kg applied to the skin in a single spot every two weeks for one month in order to investigate the effect of selamectin on canine scabies and was treated with amoxicillin trihydrate/clavulanate pattassium, ketoconazole and chlorhexidine shampoo for Malassezia sup. and Staphylococcus spp. simultaneously. When he was rechecked after 7, 14, 21, and 28 days after the first application of selamectin, scabies werent seen. The dermatological signs including pruritus, papules, scales, and crusts were remarkably resolved at 14 days. The alopecia was almost disappeared and few Malassezia spp. and Staphylococcus spp. were seen after 28 days. The efficacy of selamectin by this protocol is excellent in the dog infestated canine scabies.