• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.13-19
• /
• 2008

To develop a recycling process of magnesium alloy scrap, a fundamental study on the distillation of magnesium alloy melt was carried out. Melt temperature, vacuum degree and reaction time were considered as experimental variables. The amount of vaporized magnesium melt per unit surface area of melt increases with the increase of melt temperature, reaction time and vacuum degree. The vapor condensed at the tip of water cooling Cu-condenser as a form of pine cone. Magnesium and zinc were vaporized easily from the melt. However, It's difficult to separate magnesium and zinc by vacuum distillation because vapor pressure of zinc is similar to one of magnesium. The contents of aluminum, manganese and iron, etc. in residual melt increase due to the decrease of magnesium and zinc content after the distillation of magnesium alloy.

• Journal of Korea Foundry Society
• /
• v.34 no.3
• /
• pp.94-99
• /
• 2014

A commercially used Zr-based amorphous alloy was recycled and the effects of introducing carbon during recycling on the glass forming ability and mechanical properties of the alloy were investigated. The initial carbon content used in this study was 229ppm. The carbon content was gradually increased as the number of recycling iterations was increased and after the $4^{th}$ recycling it rapidly increased. As return scrap was recycled, polygonal particles precipitated, and they were identified as ZrC. The amount of the precipitates also increased with recycling. Tg, Tx and ${\Delta}T$ of the base alloy were 615 K, 696 K and 81 Kr respectively and they changed to 634 K, 706 K and 72 K after the $10^{th}$ recycling. The decrease of the ${\Delta}T$ value indicates deterioration of the glass forming ability. Hardness was not changed during three iterations of recycling but after the $4^{th}$ recycling it significantly increased. This is ascribed to an increase of amount of the hard particles, namely ZrC.

• Journal of the Korean association of regional geographers
• /
• v.10 no.4
• /
• pp.775-786
• /
• 2004

Establishments of wholesale of recycling materials are located in the region where an amount of recyclable wastes generated as artery industry developed and the region of rather many population. And they are located not in underpopulated area as noxious facilities, but located in the non-residential area of many population regions in the whole country. Also, establishments of recycling of metal wastes and scrap, and non-metal wastes and scrap are mainly located in the peripheral region of metropolitan cities, regional centered cities, and adjacent regions of industrial area, because of high coefficient of localization, and agglomerated effects of production. The factor influencing the location of recycling industries is deeply connected with the location of wholesale of recycling materials, and thus, the transportation costs to carry recycling materials from supplied regions to plants are important but population is not so important.

• Journal of Korea Foundry Society
• /
• v.18 no.3
• /
• pp.240-245
• /
• 1998

In the view point of the environmental conservation and the energy reduction, the recycling of metal scrap is coming as one of the global subjects in the world. In this study, the movement of intermetallics with electromagnetic force in a melt of a scrap of Al-Si-Cu alloy (JIS ADC12), which was widely used in diecasting process, was investigated in order to eliminate the Fe element, which was usually accumulated in a scrap. In this study, we applied electromagnetic method to eliminate Fe element in ADC12 aluminum alloy scrap which contains 1.64wt.% Fe and the effects of electromagnetic force on the particle movement was visualized and confirmed by water modeling and experiment. As a result, the Fe intermetallic compounds are moved to the direction opposite to that of the electromagnetic force as the force applies, thus eliminated from the bulk metal. Therefore, the content of Fe in matrix decreased from 1.64wt.% to 0.45wt.%.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.210-212
• /
• 2005

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.9.1-9.1
• /
• 2008

• Resources Recycling
• /
• v.27 no.5
• /
• pp.30-37
• /
• 2018

For recylcing of high purity tantalum (Ta) scrap, We investigated manufacture of tantalum powder using hydride-dehydride (HDH) process. Tantalum had excellent properties such as ductile, hardness and high melting point. Usually these properties made difficult to make a powder. In this study, Tantalum powder was manufactured using Tantalum hydride via hydridation. Tantalum hydride was formed at $500^{\circ}C$, 5 hr/$700^{\circ}C$, 3 hr and it is easy to make a tantalum hydride powder because hydrogen in the tantalum act as a defect dislocation and lattice expansion. The powder was pulverized to a size of less than $10{\mu}m$ under a condition of 1300 rpm, 30 min using a ring mill, and tantalum powder with less than 50 ppm hydrogen was prepared through dehydridation in an Ar and low vacuum atmosphere.

• Journal of Fisheries and Marine Sciences Education
• /
• v.20 no.3
• /
• pp.381-389
• /
• 2008

In the present paper, the regulatory compliance on the report responsibility relating to marine pollution prevention working plan for ship recycling in accordance with the Marine Environment Management Law in Korea was examined. In addition, plans to raise the regulatory compliance based on the results of the regulatory compliance questionnaire survey and interview between the concerned parties were suggested. The result of the regulatory compliance revealed that the degree of regulatory compliance of all groups is 52.7%, the government official group is 56.5%, marine industry related group is 48.6% and ship recycling group is 48.6%. Counterplans to raise the regulatory compliance, such as public relations for the ship recycling and marine industry related group and the development of simple standardized report form were suggested based on the results of the regulatory compliance survey.

• Resources Recycling
• /
• v.6 no.4
• /
• pp.24-30
• /
• 1997

The recent trend of recycle of mold scrap is to make high quality secondary ingot which can be used as raw malerial undcr intensive control of scrap. In this study, recycle of aluminum chlp generated atter machinmg process of castings was performed by vortex melting melhod Vortex melting technique was adopted for chip mclting process. The condition far optimal vortcx depth was decided using water mndellng experiment varying the shape, location, rotating speed of stlircr and watcr levcl. Before melting, chips were preheated at room temperame, 200, 300, $ 400^{\circ}C$and then submerged in the mirldle of vortex. The lecovery rale depending on the temperature was examined. As a result vortex depth was influenccd only by shape and rotating speed of stirrer, and the hlghest recovery rate oI 97% was obta~nedw hcn the submerged chip was preheated at $300^{\circ}C.$

• Resources Recycling
• /
• v.17 no.6
• /
• pp.43-49
• /
• 2008

In this study, a scrap sorting system using a color recognition method has been developed to automatically sort out specified materials from a mixture, and its application as been examined in the separation of Cu and other non-ferrous metal parts from a mixture of iron scraps. The system is composed of three parts; measuring, conveying and ejecting parts. The color of scrap surface is recognized by the measuring part consisting of a line-scan camera, light sources and a frame grabber. The recognition is program-controlled by a image processing algorithms, and thus only the scrap part of designated color is separated by the use of air nozzles. In addition, the light system is designed to meet a high speed of sorting process with a frequency-variable inverter and the air nozzled ejectors are to be operated by an I/O interface communication with a hardware controller. In the functional tests of the system, its efficiency in the recognition of Cu scraps from its mixture with Fe ones reaches to more than 90%, and that in the separation more than 80% at a conveying speed of 25 m/min. Therefore, it is expected that the system can be commercialized in the industry of shredder makers if a high efficiency ejecting system is realized.