• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.27.1-27.1
• /
• 2008

KASI (Korea Astronomy and Space Science Institute) is developing a compact wide-field survey space telescope system, MIRIS (The Multi-purpose IR Imaging System) to be launched in 2010 as the main payload of the Korea Science and Technology Satellite 3. Through recent System Design Review (SDR) and Preliminary Design Review (PDR), most of the system design concept was reviewed and confirmed. The near IR imaging system adopted short F/2 optics for wide field low resolution observation at wavelength band 0.9~2.0 um minimizing the effect of attitude control system. The mechanical system is composed of a cover, baffle, optics, and detector system using a $256\times256$ Teledyne PICNIC FPA providing a $3.67\times3.67$ degree field of view with a pixel scale of 51.6 arcsec. We designed a support system to minimize heat transfer with Muti-Layer Insulation. The electronics of the MIRIS system is composed of 7 boards including DSP, control, SCIF. Particular attention is being paid to develop mission operation scenario for space observation to minimize IR background radiation from the Earth and Sun. The scientific purpose of MIRIS is to survey the Galactic plane in the emission line of Pa$\alpha$ ($1.88{\mu}m$) and to detect the cosmic infrared background (CIB) radiation. The CIB is being suspected to be originated from the first generation stars of the Universe and we will test this hypothesis by comparing the fluctuations in I (0.9~1.2 um) and H (1.2~2.0 um) bands to search the red shifted Lyman cutoff signature.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.131-147
• /
• 2017

The purpose of this study is to analyze the characteristics of Punchong and Whiteware pottery excavated from the kiln site in Dongkok-Town, Gimge. Scientific analysis is carried out to evaluate the physical and chemical properties of the body and glaze. The physical properties indicate the gradual development of the production technology with respect to the kiln operating conditions and period. In chemical properties, the ceramic body is found to be made of raw materials from the same source, but the mixing method depends on the type of Punchong and Whiteware pottery, the production kiln, and period. Whiteware pottery is manufactured with less over 1.3% of the colorant content and more about 1.2% of the $K_2O$ flux content than Punchong pottery. This compositions allow easier vitrification at the same temperature. These characteristics which is low colorant content and high flux content become more prominent as lately. The ceramic glaze is likely to have changed the type of raw materials used after 16~17C, as the contents of MgO, $TiO_2$, MnO, $P_2O_5$ are less three to ten times than 15C.

• Journal of Korea Multimedia Society
• /
• v.13 no.8
• /
• pp.1256-1262
• /
• 2010

The game has been rapidly evolving through various media such as computer, console game machine, cellular phone and PMP based on the advanced development of scientific technology. In terms of demand, the interest in and desire to consume the game as a way of spending people's spare time have been on the increase constantly while the level of income has been improved. Eventually, the game has gradually expanded its scope of supply and demand, has established its own status as one of the media that is scientifically-intensive and has been developed into a game industry, a large-scale industry. Unlike image media, the methods of exposure in PPL are varied in accordance with the genre of games. This study divides the causes that have influence over the effect of PPL in the game into the genre of game and the skill of gamer. The results of the experiment on how much the aforementioned two elements have influence over the effect of PPL are as in the following: It has been demonstrated that the effect of PPL could appear different according to the genre of game and the skill of gamer on the game. Besides, the genre of game that is dynamic in its screen change in the game has relatively lower effect of PPL than that is not dynamic. Meanwhile, the persons who are highly skilled in the game have higher degree of recognition and preference to the inserted PPL than those who are lowly skilled. In this regard, it has given us a theoretical ground that the fees system for PPL ads should be established variously in accordance with the genre of game and the level of online game users.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2010

As a modem urban train is getting complex in terms of high-technology in its systems and components, the failure management should be performed with scientific and systematic technique. FMEA is a technique to analyze the failure trends of component parts and influences to the higher level system in order to discover the design incompleteness and potential defects, which is for improving reliability. Especially, FMECA (Failure Mode Effects, and Criticality Analysis) is used in case that the criticality that has an immense influence to the system is important. In case of urban train, in its design and manufacturing steps, FMEA is frequently used as an analysis technique to meet the safety objectives and eliminate potential hazards/failures since the concepts of reliability of train is introduced these days. Though, FMEA technique in the maintenances steps lacks in its investigation and applications yet. FMEA is also not applied to the trains operated by Seoul metro in the design and manufacture steps excepts the newest trains. In this paper, through analyzing the failures/maintenance data of the belt-type door systems used in trains operated in Seoul metro Line 1, which is accumulated in RIMS (Rolling-stock Information Maintenance System), FMEA procedures to the belt-type door engines are proposed. Especially, an effort is made, to approach the detailed FMECA procedures to the door magnet valve and switch and door engine devices which vastly influences the customer safety and satisfaction.

• Publications of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.11-16
• /
• 2015

First light galaxies have predictable linear clustering, and are expected to produce fluctuations with a characteristic spatial power spectrum, which peaks at an angular scale of ~ 10 arcminutes and in the $1-2{\mu}m$ spectral regions. The Cosmic Infrared Background ExpeRiment 2 (CIBER2) is a dedicated sounding rocket mission for measuring the fluctuations in the extragalactic infrared background light, following up the previous successful measurements of CIBER1. With a 28.5 cm telescope accompanied with three arms of camera barrels and a dual broadband filter on each H2RG (${\lambda}_c=2.5{\mu}m$) array, CIBER2 can measure 6 bands of wide field ($1.1{\times}2.2$ degrees) up to 3 AB magnitudes deeper than CIBER1. This project is leaded by California Institute of Technology/Jet Propulsion Laboratory, collaborating internationally with Institute of Space and Astronautical Science in Japan, Korea Astronomy and Space Science Institute, Korea Basic Science Institute, and Seoul National University. The Korean team is in charge of 1) one H2RG scientific array, 2) ground station hardware and software, 3) telescope lenses, and 4) flight and test bed electronics fabrication. In this paper, we describe the detailed activities of the Korean participation as well as the current status of the CIBER2 project.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.4
• /
• pp.384-392
• /
• 2013

Objective: This study inspected incident cases, legal control levels, and GHS(Globally Harmonized System of Classification and Labeling of Chemicals) classification results of strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid, which have been responsible for many recent chemical accidents. As a result, it is deemed necessary for legal control levels of these strong acids to be revised and GHS classification be managed nation-wide. Methods: This study inspected incident cases and legal control levels for strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid. The study analyzed and compared chemical information status and GHS classification results. Results: There were 76 domestic incidents involving strongly acidic hazardous materials over the five years between 2007 and 2011. They include 37 leakage incidents(46.7%) within a workplace, 30 leakage incidents(39.5%) during transportation, and nine leakage incidents(13.8%) following an explosion. The strongly acidic materials in question are defined and controlled as toxic chemicals according to the classes of Substances Requiring Preparation for Accidents, Managed Hazardous Substance, Hazardous Chemical(corrosive) as set forth under the Enforcement Decree of the Toxic Chemicals Control Act and Rules on Occupational Safety and Health Standards of Occupational Safety and Health Act. Among them, nitric acid is solely controlled as a class 6 hazardous material, oxidizing liquid, under the Hazardous Chemicals Control Act. The classification results of the EU ECHA(European Chemicals Agency) CLP(Commission Regulation(EC) No. 790/2009 of 10 August 2009, for the purposes of its adaptation to technical and scientific progress, Regulation(EC) No 1272/2008 of the European Parliament and of the Council on classification, labeling and packaging of substances and mixtures) and NIER (National Institute of Environmental Research) are almost identical for the three chemicals, with the exception of sulfuric acid. Much of the classification information of NITE (National Institute of Technology and Evaluation) and KOSHA(Korea Occupational Safety and Health Agency, KOSHA) is the same. NIER provides 12(41.4%) out of 29 classifications, as does KOSHA.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.43-61
• /
• 2004

This study is purposed to examine the interests of students and usefulness of TechnologyㆍHome Economics, which is a requirement for both male and female high school students. The targeted subject of this study were 533 high school sophomores and seniors in Kyungsangnamdo region and in consideration of regional differences, three high schools were selected in urban Jinju and three other schools were selected in countryside of Hapchun. The collected data was processed by SAS program, a social, scientific and statistical processing program. and analyzed the date using the statistical methods of frequency, percentage and average along with t-test and one-way ANOVA. The results and conclusions of this study are summarized as follow: 1. The interests of students' Technology. Home Economics. the respondents gave 3.10 points of the perfect 5.0. The influential variables to the interests of high school students to TechnologyㆍHome Economics were sex, type of school, location of inhabitation. grades, favor to textbook, and self-esteem. 2. The practical usefulness of students' TechnologyㆍHome Economics, the respondents gave 3.17 points of the perfect 5.0. The influential variables to the usefulness of TechnologyㆍHome Economics were sex, type of school, location of inhabitation, age of father, occupation of mother, domestic financial status, grades, favor to textbook and self-esteem.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.119-128
• /
• 2015

Domestic dominant method in subcontract cost estimate for comprehensive program management is estimation by referencing similar cases or relying on the experience and expertise of the engaged. However, this method is not reliable due to lack of accuracy, making it harder for clients to plan and budget the program. Since budget itself is roughly estimated, it becomes a source of cost rise in the course of management due to design modifications. Therefore, the client and service providers shall calculate more accurate service cost by applying objective and scientific method in order to minimize cost rise and cost related dispute. Traditional cases, in estimating program management cost, took Top-Down approach based on precedents and experience. On the contrary, this study will categorize management structure into phases and activities, issue WBS for each phase to estimated schedule and cost for each code, and take Bottom-UP approach. By taking this approach named ICEP (Integrated Cost Estimate based on Project), Set project typical model will be developed for service cost estimating, calculate cost by applying project-specific factors. Also, by analyzing progress data and allocated management cost to complement them, more efficient construction management will take shape based on program management cost standards which reflect project-specific features.

• Journal of the Korean Society of Costume
• /
• v.53 no.1
• /
• pp.35-48
• /
• 2003

The primary goal of this study is to define the future image of modern fashion. By review of many references, this study has examined predictable future in common, various researches on future, and futurism that appeared from art history. This study has also identified the trend of future image and the properties of the image in terms of fashion as well. The purpose of this study is defined as future image of modern fashion. First of all. through a large literature, this study is to examine general future and the study of future, to investigate futurism appears from art history. and to identify the trend of future image and the properties of the image in terms of fashion. The main results of this study include : 1) General future means forthcoming sometime or a state of life at that time, and future is not drawing near naturally in accordance with the passage of time. The future is developed according as which the owners of time have independent meaning and what they select. 2) The futurism had started with the background based on Darwins and Einsteins scientific theories and Bergsons and Nietzsches philosophical thoughts, which was then established by Marinettis Futurism Statement and Dynamism Theory of Umberto Boccionio, Giaomo Balla, Luigi Russolo and Gino Severini. As the purpose of futurism is to represent the dynamism of machinery and the beauty of speed, it has been developed toward op art and kinetic art including video art, laser art, and holography. 3) Fashion style and trend of futurism from the beginning of 20th century up to now can be defined as follows : Firstly futurism fashion represented by loud colors and geometric pattern appeared from 1910s to 1930s in the first place. Secondly, or art fashion and kinetic fashion appeared in 1960s due to the influence of op art and kinetic art which were developmental arts of futurism paintings. Space Look and Cosmo Corps Look that were designed by Andre Courreges, Pierre Cardin, Rudi Gernreich and Paco Rabanne, were also the trend of future image fashion. Thirdly, various materials and techniques developed this future image fashion in 1980s, and Glitter Look and Collage Look were its representative style. Fourthly, in 1990s, human beings dreamed the freedom of mind by human-oriented thought. and created the ecology of new concept mixed with technology due to anxiety on environmental destruction. which influenced on the advent of Zen style.