• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.739-746
• /
• 2016

A total of 152 pig farms were randomly selected from the five provinces in South Korea. During the experiment, the average temperature and relative humidity was $24.7^{\circ}C$ and 74% in summer and $2.4^{\circ}C$ and 53% in winter, respectively. The correlation between floor space allowance (FSA) and productivity index was analyzed, including non-productive sow days (NPD), number of weaners (NOW), survival rate (SR), appearance rate of A-grade pork (ARA), and days at a slaughter weight of 110 kg (d-SW) at different growth stages. The objectives of the present study were i) to determine the effect of FSA on the pig productivity index and ii) to suggest the minimum FSA for pigs based on scientific baseline data. For the pregnant sow, NPD could be decreased if pregnant sows were raised with a medium level (M) of FSA (3.10 to $3.67m^2/head$) while also keeping the pig house clean which improves hygiene, and operating the ventilation system properly. For the farrowing sows, the NOW tended to decrease as the FSA increased. Similarly, a high level of FSA (H) is significantly negative with weaner SR of farrowing sows (p-value = 0.017), indicating this FSA tends to depress SR. Therefore, a FSA of 2.30 to $6.40m^2/head$ (very low) could be appropriate for weaners because a limited space can provide a sense of security and protection from external interruptions. The opposite trend was observed that an increase in floor space (> $1.12m^2/head$ leads to increase the SR of growing pigs. For the fattening pigs, H level of FSA was negatively correlated with SR, but M level of FSA was positively correlated with SR, indicating that SR tended to increase with the FSA of 1.10 to $1.27m^2/head$. In contrast, ARA of male fattening pigs showed opposite results. H level of FSA (1.27 to $1.47m^2/head$) was suggested to increase productivity because ARA was most affected by H level of space allowance with positive correlation ($R^2=0.523$). The relationship between the FSA and d-SW of fattening pigs was hard to identify because of the low $R^2$ value. However, the farms that provided a relatively large floor space (1.27 to $1.54m^2/head$) during the winter period showed d-SW was significantly and negatively affected by FSA.

• Journal of Information Technology Services
• /
• v.6 no.3
• /
• pp.225-239
• /
• 2007

Mobile service is highly becoming in the limelight on information society by offering infringement problem about individual privacy or information by political and scientific interest This study is focusing on primary LBS application Mobile service that emphasize position confirmation, especially, looking for friends. The aim at this study grasps user productivity factor of LBS application Mobile service, and analyses whether some have relations with value and action determination of LBS application Mobile service. According to result, Mobile service applying position service is supported with usefulness and system quality, adaptedness. On the other hand, Usability and social effect, privacy weren't embossed by leading person. Mobile service applying position service is changed with a person who have experience looking for friend. This study has systematically analysed about LBS application service by leading person

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.229-242
• /
• 2011

The assorting process in distribution center is one of the most difficult and time-consuming process. The improvement of assorting productivity is a core element which decides efficiency of a distribution center. The time to shipping from receiving depends on assorting such as sorting by customer. To enhance efficiency of assorting typically uses the put to light system composed of computer and digital indicator etc. Generally the layout of put to light system has been performed rather than scientific analysis by a common experience. Therefore, this study analyzes the impact of assorting performance by the number of aisle in assorting process of put to light system.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.135-138
• /
• 2001

The design and manufacture of injection molded Sear with desired Properties is a costly process dominated by empiricism including the interactive modification of prototype toolings. In this paper, an interactive computer-based design system for injection molded gear is developed in order to realize the concept of rational design for the productivity and quality of mold making of a small plastic gear. The knowledge-based synthesis system being developed in this paper combines a rule-based expert system with analytical process simulation programs in a synergistical manner. Quick and logical evaluations on the design of injection molded gear can be made on the scientific analysis and the accumulated experts' knowledge.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.35.2-35.2
• /
• 2019

The next decade will see great advances in ground-based spectroscopic observing capabilities: facilities that are under development today will have larger collecting areas and greater spectroscopic multiplexing capabilities than ever before, and are sure to revolutionize the scientific productivity of our field. In this talk I will review the status of two of these next-generation facilities, the Giant Magellan Telescope's wide-field multiobject optical spectrograph, GMACS, and the Maunakea Spectroscopic Explorer project, a massively multiplexed spectroscopic facility currently under development in Hawaii that features an 11.25m diameter primary mirror which feeds 4,332 fibers and a suite of low- and high-resolution spectrographs. These two projects are scientifically quite complementary and both present exciting instrument development opportunities over the next few years.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3653-3661
• /
• 2013

Along with rapid economic growth and enhanced agricultural productivity, particulate matter emissions in the northern cities of Thailand have been increasing for the past two decades. This trend is expected to continue in the coming decade. Emissions of particulate matter have brought about a series of public health concerns, particularly chronic respiratory diseases. It is well known that lung cancer incidence among northern Thai women is one of the highest in Asia (an annual age-adjusted incidence rate of 37.4 per 100,000). This fact has aroused serious concern among the public and the government and has drawn much attention and interest from the scientific community. To investigate the potential causes of this relatively high lung cancer incidence, this study employed Fourier transform infrared spectroscopy (FTIR) transmission spectroscopy to identify the chemical composition of the $PM_{2.5}$ collected using Quartz Fibre Filters (QFFs) coupled with MiniVol$^{TM}$ portable air samplers (Airmetrics). $PM_{2.5}$ samples collected in nine administrative provinces in northern Thailand before and after the "Haze Episode" in 2013 were categorised based on three-dimensional plots of a principal component analysis (PCA) with Varimax rotation. In addition, the incremental lifetime exposure to $PM_{2.5}$ of both genders was calculated, and the first derivative of the FTIR spectrum of individual samples is here discussed.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.415-428
• /
• 2010

Converging technologies have become a major issue in science policy. This paper describes the current state of scientific collaboration for convergent technologies among researchers in South Korea, by conducting Social Network Analysis (SNA) with the data set of 1,095 researchers who have involved in the development of the convergent technologies. It is found that the researchers in convergent technology are more productive than the researchers in other technology domains. However, the researchers in convergent technologies have small number of collaborators, compared with their productivity. Only a few researchers have a role of the hub in the collaboration networks, meaning that the structure network is closer to than the core than the peripheral. The scientific collaboration network of the convergent technology researchers shows that the members of the network are close to each other, but there is small number of cliques.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.121-142
• /
• 1983

Recently mycorrhizal research has been one of the most fast-growing research areas in modern plant science and microbiology. The application potential of mycorrhizal techniques to agriculture and forestry is enormous in view of the ubiquitous nature of mycorrhizae and known benefits of mycorrhizae to host plants. Unfortunately, very few scientists in Korea are currently involved in mycorrhizal research. When a team of American plant pathologists visited Korea in September 1982 to participate in the Korea-U.S.A. Joint Seminar on Forest Diseases and Insect Pests, they were surprised by the principal author's statement that there was no single research project on mycorrhizae sponsored by Korean government or any scientific institutions. The author initiated a few years ago a research project on the ecology of tree mycorrhizae with a foreign financial support. Major areas of interest were survey of ectomycorrhizae in relation to soil fertility, taxonomic distribution of mycorrhizae among woody plants, identification of ectomycorrhizal fungi, and growth response of woody plants to artificial inoculation. In spite of the enormous application potential of mycorrhizae to agronomic plants, the subject of mycorrhizae has not been recognized by Korean agronomists, foresters or pathologists. The purpose of this review rather written in Korean is to introduce the techniques of mycorrhizal research to Korean scientists and to urge them to participate in challenging new scientific field which might bring us a remarkable increase in crop productivity and tree growth through manipulation of this unique symbiosis. In this review, following topics were discussed in the same order: introduction; brief history of mycorrhizal research; morphology and classification of mycorrhizae; distribution of mycorrhizae in plant kingdom and in soil profile; physiology of mycorrhizae (functions, mineral nutrition, mycorrhizal formation); interaction of mycorrhizae with soil-born plant pathogens. mycorrhizae in nitrogen-fixing plants; application of mycorrhizal techniques to nursery practices (isolation, culture, inoculation, and response); prospect in the future.

• Perspectives in Nursing Science
• /
• v.4 no.1
• /
• pp.9-18
• /
• 2007

Background: Intersectoral and multidisciplinary collaboration is becoming more prominent in all facets of government, health, social services, and scientific endeavors. An interplay of a multitude of driving forces moves multiple disciplines forward to achieve quality outcomes in health and social sciences services and research. Aim: This paper aims at discussing the prospects for future multidisciplinary collaboration. If inter organizational integration and multidisciplinary collaboration are the ways of the future in academia and the scientific world, it then becomes crucial to examine what lies ahead for the nursing profession, Discussion: This paper argues that in order for multidisciplinary endeavors to succeed, the leaders in multidisciplinary teams shoulder the largest share of the responsibilities involved. In developing a lasting team constituting professionals from different disciplines, the leader needs to include the right individuals in the team, identify a common goal, build trusting relationships through open communication and interprofessional education, and empower members through creating room for autonomy and at the same time allowing space for personal development. The leader will need to utilize information technologies to manage communication issues in a large multi-site multidisciplinary project. Lastly, he or she must be able to demonstrate team productivity through process and outcome evaluation. It needs to be emphasized that it falls to each individual nurse to speak up and act upon what nursing believes and represents in our quest for success in multidisciplinary endeavors. Conclusion: The significance of the role of the leader is paramount for a team to succeed. Yet there is no prospect if only a handful of exceptional nurse leaders are moving ahead in multidisciplinary endeavors. Without the actualization of professional roles by each individual nurse, the profession will have no prospect in collaborations across disciplines.

• Journal of Gifted/Talented Education
• /
• v.17 no.1
• /
• pp.193-213
• /
• 2007

We present a creative program model for encouraging the creative ability of gifted students by using overlapped patterns found in every day life. This model is based on the basic concept that the purpose of physics education is enlightenment from around the world. Combining both the Western perspective of creativity as productivity and the Eastern perspective of creativity as enlightenment, a Program for Enlightened and Productive Creativity(PEPC) for teaching inquiry was devised. This Program for Enlightened and Productive Creativity describes stages through which a student is guided to solve a problem using increasingly complex observation, inquiry, and experimentation. The use of this model in teaching is illustrated through a physics lesson of moire patterns using overlapping patterns found in our every day life. A case is made that PEPC can be applied to teaching general students as well as gifted students and in different content areas. PEPC model is applied to general students in middle school, scientifically gifted students and physics teachers.