• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.43-50
• /
• 2005

A number of carbonyl compounds including formaldehyde and acetaldehyde are well known for their toxicity and irritancy. Hence, acquisition of both qualitative and quantitative tool for their analysis is essential to resolve issues associated with malodor or indoor pollution. Using HPLC/UV method, we examined various aspects involved in the measurements of formaldehyde in environmental samples. The results of our analysis indicated that its detection was made as low as 0.5 ppb (assuming 5 L of sample volume), while its precision was maintained near 2% in terms of relative standard error (RSE). When the stability of calibration was checked by variability of slope values obtained over long-term period (e.g., one month), its values were found to remain constantly with RSE values of 3%. It was also found that liquid-phase reaction between formaldehyde and DNPH proceed very slowly to attain equilibrium (one and half hour), while requiring adequate amount of DNPH to form their derivatives. The overall results of our study thus suggest that there are a number of factors to consider for the accurate analysis of formaldehyde in ambient air.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.21-35
• /
• 2020

Due to the coronavirus pandemic and diplomatic disputes, governments are actively developing a policy to revitalize·reshore manufacturing and to diversify international cooperations. In order to develop such a policy, it is very important to compare and analyze domestic·international geospatial information. Over the decade, the US·EC governments have conducted a series of national researches to build data-based tools that can monitor·analyze regional geospatial information driven by government R&D investments. In the case of the EC system, it can compare geospatial information in domestic and international(including Korea) regions. Compared to US·EC cases, Korean examples of national researches with available data analplatform need future improvements. Current study is investigating an automated analysis methodologies using "National Institute of Science and Technology Information (NTIS)" DB, which was national security data until recently. Research on data-mining regional geospatial information can contribute to support policy fields that need to discover new issues in response to unexpected social problems such as recently faced corona and trade disputes.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.171-195
• /
• 2013

One of the current issues in Workers' Compensation Insurance is about the coverage range. Korea uses the definition of worker under the Labor Standards Act in Workers' Compensation Act and solved the problems associated with the coverage range of insurance group by the exceptional clause only for the groups which was raised about the need for the social protection. The purpose of this paper is to draw implications for solving problems which are associated with the coverage range of insurance group by reviewing the German literature. We focus on volunteers and persons in special types of employment. German government supports the activity of volunteers by providing with the protection service against the accidents. This paper shows how the coverage range is extended from the dependent employees in the introduction of the Workers' Compensation Insurance to the people who need social protection focusing on the volunteers. The implications of this research are following. First, German system shows that Workers' Compensation Insurance can be extended to the groups which do not belong to the dependent employee but are worthy of protection. Second, it is necessary to provide volunteers in the social welfare system with the protection service against the accidents and the statutory accident scheme is recommendable to use. Third, volunteers in the social welfare system need to be compulsory insured. Fourth, Korea should find their own way in solving problems associated with persons in special types of employment.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.82-108
• /
• 2024

With the transition of archaeological recording method's transition from analog to digital, the 3D scanning technology has been actively adopted within the field. Research on the digital archaeological digital data gathered from 3D scanning and photogrammetry is continuously being conducted. However, due to cost and manpower issues, most buried cultural heritage organizations are hesitating to adopt such digital technology. This paper aims to present a digital recording method of relics utilizing open-source software and photogrammetry technology, which is believed to be the most efficient method among 3D scanning methods. The digital recording process of relics consists of three stages: acquiring a 3D model, creating a joining map with the edited 3D model, and creating an digital drawing. In order to enhance the accessibility, this method only utilizes open-source software throughout the entire process. The results of this study confirms that in terms of quantitative evaluation, the deviation of numerical measurement between the actual artifact and the 3D model was minimal. In addition, the results of quantitative quality analysis from the open-source software and the commercial software showed high similarity. However, the data processing time was overwhelmingly fast for commercial software, which is believed to be a result of high computational speed from the improved algorithm. In qualitative evaluation, some differences in mesh and texture quality occurred. In the 3D model generated by opensource software, following problems occurred: noise on the mesh surface, harsh surface of the mesh, and difficulty in confirming the production marks of relics and the expression of patterns. However, some of the open source software did generate the quality comparable to that of commercial software in quantitative and qualitative evaluations. Open-source software for editing 3D models was able to not only post-process, match, and merge the 3D model, but also scale adjustment, join surface production, and render image necessary for the actual measurement of relics. The final completed drawing was tracked by the CAD program, which is also an open-source software. In archaeological research, photogrammetry is very applicable to various processes, including excavation, writing reports, and research on numerical data from 3D models. With the breakthrough development of computer vision, the types of open-source software have been diversified and the performance has significantly improved. With the high accessibility to such digital technology, the acquisition of 3D model data in archaeology will be used as basic data for preservation and active research of cultural heritage.

• Clean Technology
• /
• v.29 no.4
• /
• pp.288-296
• /
• 2023

Coal is abundantly available compared to other energy sources and is used as a versatile energy resource worldwide. To address the environmental issues stemming from conventional coal utilization, efforts are underway to develop clean coal utilization technologies, with IGCC technology being a notable example. In IGCC plants, coal is subjected to a CMD process where both drying and pulverization are achieved by supplying hot air. However, if the temperature of the supplied hot air is excessively high, it can lead to devolatilization and spontaneous combustion, thereby compromising the stable operation of the CMD process. This study aimed to measure the devolatilization and spontaneous combustion temperatures of different types of bituminous coal, and to explore their correlations with the characteristics of the coals. Six coal types exhibited devolatilization between 350 and 400 ℃, while three coal types showed devolatilization at temperatures exceeding 400 ℃. Spontaneous combustion ℃curred in one coal type below 100 ℃, six coal types between 100 and 150 ℃, and two coal types above 150 ℃. The measured initiation temperatures were compared with the coal characteristics including the oxygen, moisture, Fe₂O₃, and CaO content, the H/C ratio, and the O/C ratio to establish correlations. Regression analysis was used to calculate the regression coefficients and determination coefficients for each ignition temperature. It was found that 52.44% of the FC/VM data significantly influenced the volatile matter ignition temperature, and 59.10% of the Fe₂O₃ data significantly affected the spontaneous combustionignition temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.721-728
• /
• 2016

97% of water on earth exists in the form of seawater. Therefore, the use of marine resources is one of the most important research issues at present. The use of seawater is expanding in various fields (seawater desalination, cooling water for nuclear power plants, deep seawater utilization, etc.). Seawater intake systems utilizing sand filters in order to take in clean seawater are being actively employed. For the intake pipe used in this system, assuring equal intake flows through the respective holes is very important to improve the efficiency of the intake and filtering process. In this study, we analyzed the efficiency of the dual structure perforated pipe used in the seawater intake system using 3D numerical simulations and the inflow rate according to the gap of the up holes. In the case of decreasing gaps in the up holes toward the pipe end, the variation of the total inflow rate was small in comparison with the other cases. However, the standard deviation of the inflow rate through the up holes was the lowest in this case. Also, stable flow occurred, which can improve the efficiency of the intake process. In the future, a sensitivity analysis of the various conditions should be performed based on the results of this study, in order to determine the factors influencing the efficiency, which can then be utilized to derive optimal designs suitable for specific environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.7 s.349
• /
• pp.24-31
• /
• 2006

Traditional security mechanisms do not work well in the sensor network area due to the sensor's resource constraints. Therefore security issues are challenging problems on realization of the sensor network. Among them, the key establishment is one of the most important and challenging security primitives which establish initial associations between two nodes for secure communications. Recently, R. Anderson et al. proposed one of the promising key establishment schemes for commodity sensor network called Key Infection. However, key infection has an intrinsic vulnerability that there are some areas where adversaries can eavesdrop on the transferred key information at initial key establishment time. Therefore, in this paper, we propose a security-enhanced key establishment scheme for key infection by suggesting a mechanism which effectively reduces the vulnerable areas. The proposed security mechanism uses other neighbor nodes' additional key information to establish pair-wise key at the initial key establishment time. By using the additional key information, we can establish security-enhanced key establishment, since the vulnerable area is decreased than the key infection's. We also evaluate our scheme by comparing it with key infection using logical and mathematical analysis.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.6 no.9
• /
• pp.59-70
• /
• 2016

The rapid development of the Chinese version of Twitter, the groom Weibo has become an important communication means for Chinese SNS users to obtain and share information. As a result, in China, the phenomenon of the power shift has emerged from the traditional opinion leaders to SNS opinion leasers. The relationship analysis of demographic variables of the Chinese SNS users and their Information on the relationship between keywords was made by utilizing the centrality analysis using Social Network Program NetMiner. China's SNS opinion leaders have general interest in daily activities with their families or friends rather than in social issues. And in case of SNS opinion leaders of high betweenness centrality, it was analyzed that general users was a key mediator role that organically out lead to the adjacent information. These properties are not independent of demographic variables, such as professional, therefore, the demographic characteristics of SNS opinion leaders showed a significant effect on the parameters of betweenness centrality. This study analyzed the characteristics of SNS users, especially opinion leaders in China by looking at the aspects of Chinese social phenomenon in terms of information. Through this study, we expect to provide basic information about the social characteristics of China through collective communication.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.351-360
• /
• 2024

With the increasing use of drone technology, the Unmanned Aerial Vehicle (UAV) is now being utilized in various fields. However, this increased use of drones has resulted in various issues. Due to its small size, the drone is difficult to detect with radar or optical equipment, so acoustical tracking methods have been recently applied. In this paper, a method of localization of multiple drones using the acoustic characteristics of the quadcopter drone is suggested. Because the acoustic characteristics induced by each rotor are differentiated depending on the type of drone and its movement state, the sound source of the drone can be reconstructed by spatially clustering the results of the estimated positions of the blade passing frequency and its harmonic sound source. The reconstructed sound sources are utilized to finally determine the location of multiple-drone sound sources by applying the source localization algorithm. An experiment is conducted to analyze the acoustic characteristics of the test quadcopter drones, and the simulations for three different types of drones are conducted to localize the multiple drones based on the measured acoustic signals. The test result shows that the location of multiple drones can be estimated by utilizing the acoustic characteristics of the drone. Also, one can see that the clarity of the separated drone sound source and the source localization algorithm affect the accuracy of the localization for multiple-drone sound sources.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.5
• /
• pp.211-216
• /
• 2018

The recovery of rare earth elements (REE) including La, Nd and Ce from spent batteries is important issues to reuse scarce resources. Herein, we present a simple recovery process to obtain lanthanum oxide ($La_2O_3$) from spent Ni-MH batteries, and demonstrate the conversion mechanism from $NaLa(SO_4)_2{\cdot}H_2O$ to $La_2O_3$. This strategy requires the initial preparation of $NaLa(SO_4)_2{\cdot}H_2O$ and subsequent metathesis reaction with $Na_2CO_3$ at $70^{\circ}C$. This metathesis reaction resulted in the crystalline lanthanum carbonate hydrate ($La_2(CO_3)_3{\cdot}xH_2O$) powder with plate-like morphology. On the basis of TGA result, the $La_2(CO_3)_3{\cdot}xH_2O$ powder was calcined in air at three different temperatures, that is, $300^{\circ}C$, $500^{\circ}C$, and $1000^{\circ}C$. As the calcination temperature increased, the morphology of powder was changed; prism-like ($NaLa(SO_4)_2{\cdot}H_2O$) ${\rightarrow}$ platelike ($La_2(CO_3)_3{\cdot}xH_2O$) ${\rightarrow}$ aggregated irregular shape ($La_2O_3$). Futhermore, XRD results indicated that the crystalline $La_2O_3$ could be synthesized after the metathesis reaction with $Na_2CO_3$, followed by heat-treatment at $1000^{\circ}C$, along with a change of crystallographic structures; $NaLa(SO_4)_2{\cdot}H_2O$ ${\rightarrow}$ $La_2(CO_3)_3{\cdot}xH_2O$ ${\rightarrow}$ $La_2O_3$.