• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2919-2924
• /
• 2011

The automatic drawer is used to absorb the movement shock and adjust its velocity when it opens and closes. The tube in shock-absorber is the cylindrical case which surrounds its parts and is made of acetal. The purpose of this study is to determine the quality stability of the tube in the shock-absorber in injection molding process. The tube which had been manufactured in the process with 4 cavity cooling unit was used. In this study, the analysis and test are carried out to determine its quality stability. Which are the quality analysis with numerical simulation and performance tests of the tube compared with one of foreign make. It is calculated that the injection press is 87.6 MPa and the deflections in X, Y, Z directions are ranged in 0.07~1.00 mm. When the researched tube is compared with the foreign made tube, the maximum bending compressive load is 231 kgf higher, average axial compressive load is 0.05 kgf higher, and the roughness(Ra) on the inner surface is $0.02\;{\mu}m$. lower. In the result, it is known that the quality of researched tube in injection mold process is stable and its performance is superior.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.527-534
• /
• 2016

The emergent information society requires the talent for creative thinking based on problem-solving skills and comprehensive thinking rather than simple memorization. Therefore, the Korean curriculum has also changed into the direction of the creative thinking through increasing short-answer questions that can determine the overall thinking of the students. However, their scoring results are a little bit inconsistency because scoring short-answer questions depends on the subjective scoring of human raters. In order to alleviate this point, an automated scoring system using a machine learning has been used as a scoring tool in overseas. Linguistically, Korean and English is totally different in the structure of the sentences. Thus, the automated scoring system used in English cannot be applied to Korean. In this paper, we introduce an automated scoring system for Korean short-answer questions using predictability and unanimity. We also verify the practicality of the automatic scoring system through the correlation coefficient between the results of the automated scoring system and those of human raters. In the experiment of this paper, the proposed system is evaluated for constructed-response items of Korean language, social studies, and science in the National Assessment of Educational Achievement. The analysis was used Pearson correlation coefficients and Kappa coefficient. Results of the experiment had showed a strong positive correlation with all the correlation coefficients at 0.7 or higher. Thus, the scoring results of the proposed scoring system are similar to those of human raters. Therefore, the automated scoring system should be found to be useful as a scoring tool.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.391-398
• /
• 2001

To design and develop secure operating systems, the BLP (Bell-La Padula) model that represents the MLP (Multi-Level Policy) has been widely adopted. However, user\`s security level in the most developed systems based on the BLP model is inherited to a process that is actual subject on behalf of the user, regardless whatever the process behavior is. So, there could be information disclosure threat or modification threat by malicious or unreliable processes even though the user is authorized in the system. These problems can be solved by defining the subject as (user, process) ordered pair and by defining the process reliability. Moreover, when the leveled programs which exist as objects in a disk are executed by a process and have different level from the process level, the security level decision problem occurs. This paper presents an extended BLP (E-BLP) model in which process reliability is considered and solves the security level decision problem. And this model is implemented into the Linux kernel 2.4.7.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.27-35
• /
• 2006

In order to use alunite as an activator of blast furnace slag, we studied the hydration characteristics of the calcined alunite and the ground blast furnace slag. The alunite calcined at $650{\cire}C$ consists of KAl($KAl(SO_{4})_{2}$ and $Al_{2}O_{3}$. The calcined alunite reacts with $Ca(OH)_{2}$ and gypsum to form etrringite ($3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O$) as fellows:$2KAl(SO_{4})_{2}+2Al_{2}O_{3}+13Ca(OH)_{2}+5CaSO_{4}{\cdot}2H_{2}O+73H_{2}O{\rightarrow}3(3CaO{\cdot}Al_{2}O_{3}{\cdot}3CaSO_{4}{\cdot}32H_{2}O)+2KOH$. The $SO_{4}^{2-}$ ions from calcined alunite reacts with CaO in blast furnace slag to from gypsum, which reacts with CaO and $Al_{2}O_{3}$ to from ettringite in calcined alunite-blast furnace slag system. Therefore blast furnace slag can be activated by calcined alunite.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.43-49
• /
• 2019

In this study, a new approach using graphene oxide (GO) powder-composited Sn-3.0Ag-0.5Cu(in wt.%) solder paste for improving the bending reliability of solder joints between a flexible substrate and small outline package (SOP) was suggested. The GO addition slightly affected the melting temperature, however, the change in the melting temperature was not significant. Meanwhile, we observed the addition of GO could suppress IMC growth and IMC thickness of solder joint during the reflow process. Moreover, the cyclic bending test was also performed for evaluation of reliability in solder joint and we could improve the cyclic bending reliability of solder joint by adding GO powders. For 0.2 wt.% of GO added to the solder joint, the bending lifetime was increased to 20% greater than that without GO. Pull strength and ductility of the solder joint with GO were also higher than those of the joint without GO and it was assumed that this effect by adding GO could contribute to improve cyclic bending reliability of solder joint.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.266-271
• /
• 2005

In this work, the thermal stability factors, such as the thermal decomposition temperature, decomposition activation energy ($E_d$), and char yield, were measured to investigate the effect of silicone rubber (SR) content on the thermal stabilities of EPDM/SR blends. As a result, the thermal decomposition curve of EPDM/SR blends was similar to the neat EPDM rubber at 10 wt% SR and the thermal decomposition temperature increased above this content. The $E_d$ value of EPDM rubber initially decreased and then was constant above 20 wt% weight losses. The $E_d$ of EPDM/SR blends was higher than that of the neat EPDM rubber and then decreased with increasing the weight loss when the SR content was in the range of 10-20 wt%. Whereas the $E_d$ of the blends was lower than that of the EPDM rubber and then decreased with increasing the weight loss when 30 wt% SR was added. The char yield at $800^{\circ}C$ increased with increasing the SR content, because the decomposition of silane groups in the backbone was capable of forming a silane-rich residue after the initial stage of thermal degradation, which finally prevents further heat transfer and diffusion in the blends.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

In this work, the effect of PMR-15 content on the variation of surface free energy of the DGEBA/PMR-15 blend system was investigated in terms of contact angles and mechanical interfacial tests. Based on FT-IR result of the blend system. C=O (1,772, $1,778cm^{-1}$) and C-N ($1,372cm^{-1}$) peaks appeared with imidization of PMR-15 and -OH ($3,500cm^{-1}$) peak showed broadly at 10 phr of PMR-15 by ring-opening of epoxy. Contact angle measurements were performed by using deionized water and diiodomethane as testing liquids. As a result, the surface free energy of the blends gave a maximum value at 10 phr of PMR-15, due to the significant increasing of specific component. The mechanical interfacial properties measured from the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$) showed a similar behavior with the results of surface energetics. This behavior was probably attributed to The improving of the interfacial adhesion between intermolecules, resulting from increasing the hydrogen bondings of the blends.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.591-598
• /
• 2021

The digital phase-locked loops(DPLL) is a circuit used for phase synchronization and has been generally used in various fields such as communication and circuit fields. State estimators are used to design digital phase-locked loops, and infinite impulse response state estimators such as the well-known Kalman filter have been used. In general, the performance of the infinite impulse response state estimator-based digital phase-locked loop is excellent, but a sudden performance degradation may occur in unexpected situations such as inaccuracy of initial value, model error, and disturbance. In this paper, we propose a minimum variance finite impulse response filter with optimal horizon for designing a new digital phase-locked loop. A numerical method is introduced to obtain the measured value interval length, which is an important parameter of the proposed finite impulse response filter, and to obtain a gain, the covariance matrix of the error is set as a cost function, and a linear matrix inequality is used to minimize it. In order to verify the superiority and robustness of the proposed digital phase-locked loop, a simulation was performed for comparison and analysis with the existing method in a situation where noise information was inaccurate.

• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.363-373
• /
• 2021

An ecological niche is defined as the specific role of a species influenced by time, space, and other resources. By investigating overlaps between ecological niches of different species, we could estimate the degrees of interspecific competition. Such studies often use geographic information systems (GIS) to discover niche overlaps between species. In this study, we used GIS to estimate the spatial niches of two Korean frog species(Pelophylax nigromaculatus and P. chosenicus). This enabled us to predict their geographic distributions in order to identify their coexistence regions and distribution patterns. The results confirmed that altitude was an important variable for predicting their distribution, with a correlation with their climatic range. Spatial distributions of the two frog species were highly overlapped, as the distribution range for P. nigromaculatus included most of the range of P. chosenicus, showing a sympatric distribution pattern. Within the coexisting regions, however, the presence sites for the two species did not overlap, implying weak competition. To confirm the principal factors influencing their competitive relationship and reasons for their sympatric distribution pattern, we need more detailed in-depth studies on the diverse environmental variables within the regions where the two species coexist. By doing so, we would be able to identify various mechanisms for avoiding competition in sympatric frog species.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.103-110
• /
• 2018

In this paper, we introduce evaluation method of time series prediction model with new approach of Mean Absolute Percentage Error(hereafter MAPE) and Symmetric Mean Absolute Percentage Error(hereafter sMAPE). There are some problems using MAPE and sMAPE. First MAPE can't evaluate Zero observation of dataset. Moreover, when the observed value is very close to zero it evaluate heavier than other methods. Finally it evaluate different measure even same error between observations and predicted values. And sMAPE does different evaluations are made depending on whether the same error value is over-predicted or under-predicted. And it has different measurement according to the each sign, even if error is the same distance. These problems were solved by Maximum Mean Absolute Percentage Error(hereafter mMAPE). we used the absolute maximum of observed value as denominator instead of the observed value in MAPE, when the value is less than 1, removed denominator then solved the problem that the zero value is not defined. and were able to prevent heavier measurement problem. Also, if the absolute maximum of observed value is greater than 1, the evaluation values of mMAPE were compared with those of the other evaluations. With Beijing PM2.5 temperature data and our simulation data, we compared the evaluation values of mMAPE with other evaluations. And we proved that mMAPE can solve the problems that we mentioned.