• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Science of Emotion and Sensibility
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2019

The U-Healthcare era has evolved with the development of the Internet of things (IoT) in the early stages of being connected as a society. Already, many changes such as increased well-being and the extension of human life are becoming evident across cultures. Korea entered the growing group of aging societies in 2017, and its silver industry is expected to grow rapidly by adopting the IoT of a super-connected society. In particular, the senior shift phenomenon has resulted in increased interest in the promotion of the health and well-being of the emergent silver generation which, unlike the existing silver generation, is highly active and wields great economic power. This study conducted in-depth interviews to investigate the characteristics of the new silver generation, and to develop the design for a wearable serious game that intends to boost the interest of the elderly in exercise and fitness activities according to their personalized physical training regimes as prescribed by the U-Hospital service. The usage scenario of this wearable serious game for the 'U-silver generation' is derived from social necessity. Medical professionals can utilize this technology to conduct health examinations and to monitor the rehabilitation of senior patients. The elderly can also use this tool to request checkups or to interface with their healthcare providers. The wearable serious game is further aimed at mitigating concerns about the deterioration of the physical functions of the silver generation by applying personalized exercise prescriptions. The present investigation revealed that it is necessary to merge the on / off line community activities to meet the silver generation's daily needs for connection and friendship. Further, the sustainability of the serious game must be enhanced through the inculcation of a sense of accomplishment as a player rises through the levels of the game. The proposed wearable serious game is designed specifically for the silver generation that is inexperienced in using digital devices: simple game rules are applied to a familiar interface grounded on the gourmet travels preferred by the target players to increase usability.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.67-73
• /
• 2015

This is a basic research for improving soft magnetic property of Fe based nano crystalline alloy powder core. The main study is done around characteristics of permeability, core loss, and DC bias depending on amount of insulation coating agent and particle size. First, $Fe_{73.5}Si_{13.5}B_9Nb_3Cu_1$ amorphous alloy ribbon was fabricated by using the planar flow casting (PFC) device. Then, heat treatment and ball milling were done to obtain alloy powder. The amount of polyether imide (PEI) added to it was varied by 0.5, 1.0, 2.0, 2.5 wt% to have compression molding into $16ton/cm^2$. After going through crystalline heat treatment, the made toroidal nano crystalline powder core ($OD12.7mm^*ID7.62mm^*H4.75mm$) had smaller permeability as amount of insulation coating agent decreases. However, it was found out that core loss and DC bias characteristics have been improved. The reason for this results were expected to be because green density of power core decreases as amorphous alloy powder particles become smaller as amount of alloy powder insulation coating agent increases, it was determined that 1 wt% of insulation coating agent is appropriate. Also, for powder core made based on alloy powder size with amount of insulation coating agent fixed at 1 wt%, effective permeability and core loss were outstanding as particle size became bigger. However, characteristics of DC bias became worse as applied DC field increases. This is expected to be due to insulation effect, residual pores, or molding density of powder core resulting from thickness of coating on surface of alloy powder.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.167-175
• /
• 2006

With the recent prevalence of helical CT and multi-slice CT, which deliver higher radiation dose than conventional CT due to overbeaming effect in X-ray exposure and interpolation technique in image reconstruction. Although multi-detector and helical CT scanner provide a variety of opportunities for patient dose reduction, the potential risk for high radiation levels in CT examination can't be overemphasized in spite of acquiring more diagnostic information. So much more concerns is necessary about dose characteristics of CT scanner, especially dose efficient design as well as dose modulation software, because dose efficiency built into the scanner's design is probably the most important aspect of successful low dose clinical performance. This study was conducted to evaluate z-axis geometric dose efficiency in single detector CT and each level multi-detector CT, as well as to compare z-axis dose efficiency with change of technical scan parameters such as focal spot size of tube, beam collimation, detector combination, scan mode, pitch size, slice width and interval. The results obtained were as follows ; 1. SDCT was most highest and 4 MDCT was most lowest in z-axis geometric dose efficiency among SDCT, 4, 8, 16, 64 slice MDCT made by GE manufacture. 2. Small focal spot was 0.67-13.62% higher than large focal spot in z-axis geometric dose efficiency at MDCT. 3. Large beam collimation was 3.13-51.52% higher than small beam collimation in z-axis geometric dose efficiency at MDCT. 4. Z-axis geometric dose efficiency was same at 4 slice MDCT in all condition and 8 slice MDCT of large beam collimation with change of detector combination, but was changed irregularly at 8 slice MDCT of small beam collimation and 16 slice MDCT in all condition with change of detector combination. 5. There was no significant difference for z-axis geometric dose efficiency between conventional scan and helical scan, and with change of pitch factor, as well as change of slice width or interval for image reconstruction. As a conclusion, for reduction of patient radiation dose delivered from CT examination we are particularly concerned with dose efficiency of equipment and have to select proper scanning parameters which increase z-axis geometric dose efficiency within the range of preserving optimum clinical information in MDCT examination.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.151-161
• /
• 2017

In the fields of science and engineering, multidisciplinary research is common, and researchers with a diverse range of expertise collaborate to achieve common goals. As the 4th industrial revolution gains currency in society, there is growing demand on talented personnel both with technical knowledge and skills and with communicative skills. That is, future engineers are expected to possess competence in social and artistic skills in addition to specialized knowledge and skills in engineering. In this paper we introduce an emerging field of 3D bioprinting as an exemplary case of interdisciplinary research. We have chosen the case to demonstrate the possibility of cultivating engineers with π-shaped expertise. Building on the concept of T-shaped talent, we define π-shaped expertise as having both technical skills in more than one specialized field and interpersonal/communicative skills. Wtih references to such concepts as trading zones and interactional expertise, we suggest that π-shaped expertise can be cultivated via the creation of multi-level trading zones. Trading zones are referred to as the physical, conceptual, or metaphorical spaces in which experts with different world views trade ideas, objects, and the like. Interactional expertise is cultivated, as interactions between researches are under way, with growing understanding of each other's expertise. Under the support of the university and the government, two researchers with expertise in printing technology and life sciences cooperate to develop a 3D bioprinting system. And the primary investigator of the research laboratory under study has aimed to create multiple dimensions of trading zones where researchers with different educational and cultural backgrounds can exchange ideas and interact with each other. As 3D bioprinting has taken shape, we have found that a new form of expertise, namely π-shaped expertise is formed.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.923-932
• /
• 2003

This study was carried out to estimate the effects of breed and environment such as sex, test station, test year, test season, parity, initial and final weight on average daily gain, age at 90kg, backfat thickness, feed efficiency, lean percent and selection index on the basis of the performance data collected from 25,790 pigs of Duroc, Yorkshire and Landrace breeds which were performance-tested at the Korea Swine Testing Station from 1991 to 2002. The results obtained in the study are summarized as follows; 1. The means of the major economic traits were estimated as 959.95${\pm}$0.699g for average daily gain, 138.36${\pm}$0.072days for age at 90kg, 1.41${\pm}$0.001cm for backfat thickness, 2.33${\pm}$0.001 for feed efficiency, 56.71${\pm}$0.018% for lean percent and 221.65${\pm}$0.113 for selection index. 2. The effect of breed was statistically significant for all studied traits. Briefly, Duroc showed the best performance for the average daily gain and age at 90kg. Landrace had the best performances for the backfat thickness and lean meat percent. In feed efficiency and selection index, Yorkshire had a better score than other breeds. 3. The least-squares means of female and male for the traits studied were 923.05${\pm}$1.289g and 974.53${\pm}$0.856g for average daily gain, 139.74${\pm}$0.145days and 137.21${\pm}$0.097days for age at 90kg, 1.49${\pm}$0.002cm and 1.39${\pm}$0.002cm for backfat thickness, 2.43${\pm}$0.002 and 2.28${\pm}$0.002 for feed efficiency, 56.43${\pm}$0.034% and 56.81${\pm}$0.023% for lean percent and 211.37${\pm}$0.194 and 224.61${\pm}$0.129 for selection index. Therefore, males were superior to females for all traits examined. 4. The effect of test station was statistically significant for all traits except for selection index. Performances for age at 90kg, backfat thickness, feed efficiency and lean meat percent collected from Test station 2 were higher than those from Test station 1. However, Test station 1 showed better average daily gain. 5. The initial weight and final weight included as a covariate in this study had a significant influence on average daily gain, age at 90kg, backfat thickness, feed efficiency and selection index. From the absolute values of the estimated regression coefficients, it was inferred that the final weight had greater effect for the investigated traits than the initial weight.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1079-1088
• /
• 2003

This study was conducted to test the efficacy of the automatic liquid feeder(designated as NLRI) developed by National Livestock Research Institute, Korea for 7-day old early-weaning piglets. The other automatic liquid feeder imported from USA(designated as IALF) was used for a comparative purpose. A total of sixty piglets of 7 days of age were allotted to three treatments. The control group of 20 piglets was raised by their own sows until 21 days of age, while others were shifted to automatic liquid feeders of either NLRI or IALF on 7 days of age and reared during 14 days post-weaning. After then, all the piglets were fed nutritionally identical mash diets until 70 days of age. Compared with control group, body weight of piglets reared on automatic liquid feeders were lighter(P〈0.05) at 21 days of age [5.55kg (control) vs 4.97 (NLRI) and 4.98kg (IALF)], while heavier(P〈0.05) at 70 days of age(24.82kg vs 30.17 and 29.42kg). The results indicated that pigs reared on liquid feeding showed higher(P〈0.05) average daily gain than control pigs during the whole experimental period [346.7g (control) vs 425.8 (NLRI) and 416.1g (IALF)], while no difference was found in feed/gain (1.67 vs 1.78 and 1.84). There was no difference in growth performance and incidence of diarrhea between two automatic liquid feeders, NLRI and IALF. Compared with control group, intestinal villi tended to be shorter in liquid feeding group during the first week, but were recovered within two weeks. The results suggest that the automatic liquid feeder newly developed by National Livestock Research Institute, Korea can be successfully used for rearing young piglets weaned at very early age.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.577-584
• /
• 2003

Three dietary treatments were compared over two years to determine the effects of dietary protein levels and feeding patterns on velvet production in red deer (Cervus elaphus). The LL group received a 13% protein diet whereas the HH group received a 19% protein diet. The LH group switched from the low to high protein diet at the time of antler casting. Significant relationships were found between velvet production and the girth and length of main beam (p<0.01), daily growth rate of velvet (p<0.01), body weight at cutting time (p<0.05 in 1998 and p<0.01 in 1999), date of casting (p<0.01), and body weight and velvet production of the previous year (p<0.05 in 1998 and p<0.01 in 1999). Different levels of protein in diets in this study did not show statistically significant different effects in general. The girth of velvet, summed for top, middle and bottom of the main beam, tended to be thickest in HH for two years and thinnest in LL for 1998 and in LH for 1999. The main beam tended to be longest in HH at 46.3cm in 1998 and 45.2cm in 1999 and shortest in LH at 39.9cm in 1998 and 41.5cm in 1999. Velvet fresh weight tended to be highest in HH at 2,600$\pm$1,000g in 1998 and 3,038$\pm$867g in 1999 and lowest in LH at 2,287$\pm$826g in 1998 and 2,739$\pm$1,079g in 1999. Daily growth rate of velvet antler tended to be greatest in HH (43$\pm$16g/day in 1998 and 51$\pm$14g/day in 1999) and least in LH (38$\pm$15g/day in 1998 and 45$\pm$18g/day in 1999).

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.213-231
• /
• 2000

이 연구의 목적은 다공성의 CPP 내부에 쥐의 장골의 골수에서 유래된 세포를 접종하고 3차 원적으로 배양하여 CPP가 골 형성을 위한 조직공학의 지지체로 적용가능한가를 연구하는 것과 Calcium PolyPhosphate(CPP)의 돌연변이 유발성을 검사하는 것이다. 무수 ($Ca(H_2PO_4)$)를 condensation하여 무결정의 ($Ca(PO_3)$)를 얻고 이를 용융하고 냉각시킨 후 분쇄하여 Calcium polyphosphate(CPP) powder를 얻었다. 다공성의 CPP는 5% $SiO_2$를 첨가하여 sponge 형태로 $450-550{\mu}m$ 소공의 크기를 가지는 것과(CPP-45ppi) $200-300{\mu}m$의 소공의 크기를 가지는 것(CCP-60ppi) 2가지로 제작하였다. 각각의 CPP matrices는 $5mm{\times}5mm{\times}1mm$의 블록 형태로 만들었다. 체중 100g 내외의 백서에서 장골(femur, tibia)을 채취하여 백서의 장골 골수 세포를 분리하여 배양한 후 24well에 CPP block을 넣고 CPP block 당 $10^5$개의 배양한 세포를 접종하였다. 배양 1, 7, 14, 및 21 일째에 각 well에서 trypsin EDTA를 이용하여 2회 반복하여 cell을 분리하였고, 원심분리한 후 hemacytometer로 측정하였다. 또, 45ppi와 60ppi, 그 리 고 Tissue Culture Polystyrene(control group)에 접종, 배양된 세포들의 염기성 인산분해효소활성도를 배양 7, 14, 및 21 일째에 각각 측정하였다. 각 기간별로 배양된 세포-CPP 혼합체내에서 세포의 부착 및 증식과 형성된 조직의 3차원적 형태를 관찰하기 위하여 주사전자현미경하에서의 관찰하였다. CPP의 돌연변이 유발성 검사 (mutagenicity test)를 위해 hypoxanthine-guanine phosphoribosyl transferase(HPRT) assay를 하였다. NIH3T3 cell line과 CHO-K1 cell line으로 각각 $1000{\mu}g/m{\ell}$, $100{\mu}g/m{\ell}$, $10{\mu}g/m{\ell}$ 그리고 $1{\mu}g/m{\ell}$의 CPP 농도에서 측정하였다. 통계적 분석을 위해서 모든 측정은 각군당 4개체 이상 시험하였고, 각 측정값은 평균값${\pm}$표준편차로 나타내었다. 각 군간의 통계적 유의성 검정을 위해서 Analysis of variance(ANOVA)를 이용하였고 Tukey의 방법으로 사후분석을 실시하였다. 제작된 CPP matrices 소공들이 서로간에 연결이 잘 되어있는 형태였다. 두 가지로 제조된 CPP(45ppi와 60ppi) 모두에서 세포의 부착이 잘 일어났고, 부착된 세포의 분열도 잘 일어났다. 2 가지의 CPP 모두에서 7, 14, 21일째의 세포 수는 1일째에 비해 유의성 있게 증가하였다(P<0.01). 3차원적 구조인 Calcium PolyPhosphate에서 배양한 세포는 24well dish(tissue culture polystyrene)에서 평면적으로 배양한 대조군의 세포에서 보다 염기성 인산분해효소 (Alkaline Phosphatase)를 유의성 있게 높게 나타냈다. 주사전자현미경에서 세포-CPP 혼합체를 관찰한 결과, CPP block에 세포들이 잘부착되어 있었고, 시간이 지남에 따라 세포가 여러 층을 형성하면서 뭉치는 현상을 보였다. 또, HPRT assay 결과 , Calcium PolyPhosphate는 돌연변이 유발성을 보이지 않았다. 이상의 결과로 볼 때 CPP에는 세포부착이 잘 일어나고, 지지체 상에서 세포의 분열도 활발하게 일어나므로 골조직을 위한 조직공학의 우수한 지지체가 될 수 있을 것으로 사료된다.

• Journal of Animal Science and Technology
• /
• v.44 no.6
• /
• pp.653-660
• /
• 2002

We considered KIT gene as a candidate gene for the white-spotting pattern in cattle. This study was carried out to detect genetic variation of c-KIT receptor gene and to investigate association between the mutation and the white-spotting pattern in cattle. PCR-RFLP analysis within intron 6 of c-KIT receptor gene were performed with 8 cattle breeds including Hanwoo, Angus, Brown Swiss, Charolais, Hereford, Holstein, Limousin and Simmental. When PCR product of approximately 2,440 bp including intron 6 of c-KIT receptor gene was sequenced, four nucleotide substitutions were found within intron 6 of the bovine c-KIT receptor gene. In PCR-RFLP analysis, three alleles (A, B and C), two alleles (A and B) and two alleles (A and B) at each locus were identified by MspⅠ, BsrBⅠ and NdeⅠ, respectively. Although frequencies of allele at each locus were different among cattle breeds, we could not get any evidence related with white or white spotting phenotypes in these mutations on intron 6 of c-KIT receptor gene. However, we can not entirely exclude the possibility that c-KIT receptor gene is responsible for white spotting phenotype in cattle. Thus, further studies need to detect other mutations in c-KIT receptor gene and to test association of those mutations and coat color phenotypes in cattle.