• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.110-113
• /
• 1993

The MOSFET synchronous rectification in the Active-Clamp Forward converter is presented. The Active-Clamp Forward converter has little dead time during the off time of the main switch and it is suitable for the MOSFET synchronous rectification comparing to the other Forward converter topologics. Using the MOSFET synchronous rectification on the Active-Clamp Forward converter with 3.3[V] output and 500[kHz] switching frequency, the improvement of efficiency is achieved comparing with the conventional Schottky barrier diode rectification.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.1
• /
• pp.15-22
• /
• 1974

A new ternary full adder using the current controlled negative-resistance circuit is described. The full adder is constructed from the modified-half-adder which was devised by making use of a negative resistance circuit. This full adder makes the number of its gates decrease and makes its own speed increase in comparison with the full adders which had been introduced previously. It is convenient to construct to the integrated circuit because transistor, SBD(Schottky Barrier Diode) and resistors were used as the circuit elements.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.3-5
• /
• 2005

Ni/Au 쇼트키 접합의 산화를 통해 항복전압이 증가하고 누설 전류가 감소한 수평방향 GaN 쇼트키 장벽 다이오드를 제작하였다. 산화 과정 후, 턴-온 전압이 미세하게 증가하였으며 높은 애노드 전압하에서 애노드 전류가 증가하였다. 5분과 10분의 산화 과정 후, 누설 전류는 1nA 이하 수준으로 현저히 감소하였다. Edge Termination 방법으로 Floating Metal Ring을 사용하고, 산화 과정을 적용하여 제안된 GaN 쇼트키 장벽 다이오드의 항복전압은 750볼트의 큰 값을 얻을 수 있었다. 상온과 $125^{\circ}C$ 에서 제작한 GaN 쇼트키 장벽 다이오드의 역방향 회복 파형도 측정하였으며, 제작한 소자는 매우 빠른 역방향 회복 특성을 보였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.821-826
• /
• 2008

Recently as a progress of electric technology, modern electric systems become more and more complicated. Thus, it is difficult to use a classical method to analyze responses of the systems in complicated electromagnetic environments because there are so many coupling phenomena. The electromagnetic topology (EMT) is a helpful solution to analyze electromagnetic interference / electromagnetic compatibility (EMI/EMC) of the large complex system. In this paper, EMT is applied to analyze an active element. And then to prove the validity of this analysis, a detector circuit including Schottky barrier diode is analyzed by EMT when input power is given directly.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.66-70
• /
• 2003

In this paper a plannar singly balanced diode Miter for 24GHz band application is designed and implemented using a microstrip line and two schottky barrier beam lead mixer diodes. The implemented mixer have a conversion loss of 6 [dB], LO/RF isolation of 23 [dB], input 1dB compression point of 4 [dBm]. this diode mixer would be useful for homedyne radar.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.179.2-179.2
• /
• 2014

Carbon nanotubes (CNT)-metal contacts play an important role in nanoelectronics applications such as field-effect transistor (FET) devices. Using Al and (10,0) CNT, we have recently showed that the CNT-metal contacts mediated via topological defects within CNT exhibits intrinsically low contact resistance, thanks to the preservation of the sp2 bonding network at the metal-CNT contacts.[1] It is well-established that metals with good wetting property such as Pd consistently yield good contacts to both metallic and semiconducting CNTs. In this work, the electronic and charge transport properties of the interfaces between capped CNT and Pd will be investigated based on first-principles computations and compared with previous results obtained for the Al electrodes.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.584-591
• /
• 2013

In this paper, a hybrid booster power module with Si IGBT and Silicon Carbide (SiC) Schottky Barrier Diode (SBDs) is presented. The switching characteristics of the hybrid booster module are compared with commercial Silicon IGBT/Si PIN diode based modules. We applied the booster power module into a non-isolated on board vehicle charger with a simple buck-booster topology. The performances of the on-vehicle charger are analyzed and measured with different power modules. The test data is measured in the same system, at the same points of operation, using the conventional Si and hybrid Si/SiC power modules. The measured power conversion efficiency of the proposed on-vehicle charger is 96.4 % with the SiC SBD based hybrid booster module. The conversion efficiency gain of 1.4 % is realizable by replacing the Si-based booster module with the Si IGBT/SiC SBD hybrid boost module in the 6.6 kW on-vehicle chargers.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.207-208
• /
• 2006

분자선(分子線)에피택시법(法)으로 성장(成長)한 ZnO 산화물반도체(酸化物半導體)를 이용(利用)하여 제작(製作)한 쇼트키배리어 다이오드에 대하여 자외선(紫外線) 광(光)센서로서의 광특성(光特性)을 조사(調査)한다. 첫째, 백색광(白色光) 조사시(照射時) 포화전류치(飽和電流値)가 100배(培) 이상(以上) 증가(增加)하는 광(光)여기 특성(特性)을 나타낸다. 둘째, 조사(照射)하는 �셈� 파장(波長)에 대하 390nm의 차단장파장(遮斷長波長)을 갖으며 195nm 이상(以上)의 밴드폭을 갖는 파장감도특성(波長感度特性)을 나타낸다. 셋째, 자외선(紫外線)에 대해 0.36msec의 시정수(時定數) 갖는 것으로 평가(評價)된다. 따라서, ZnO 산화물반도체(酸化物半導體)는 향후(向後) 자외선(紫外線) 광(光)센서소자의 재과(材科)로서 기대(期待)되어진다.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.234-238
• /
• 1987

In this paper, the used specimen composition was added basic additives ($Bi_2O_3\;lmol%$, $Sb_2O_3\;lmol%$, CoO 0.5 mol%, MnO 0.5mol%) to ZnO powder, and $TiO_2$ (1,2,3,4 mol%) to the above basic composition. It appears that there are four regions of conduction current depended upon the strength of the applied electric field ; Ohimic region, Poole-Frenkel region, Schottky region and Tunneling region. Increasing of $TiO_2mol%$, the breakdown voltages of ZnO ceramic varistors are decreased. The decrease of breakdown voltages was explained with the decrease of potential barrier height. Moreover, V-I characteristics with temperature dependence are decreased with increasing of $TiO_2mol%$.

• Journal of the Korean Ceramic Society
• /
• v.40 no.10
• /
• pp.921-924
• /
• 2003

A current-voltage relation for Positive Temperature Coefficient of Resistance (PTCR) ceramic was derived and compared with the experimental data. The new current-voltage relation was developed based on Heywangs double Schottky barrier model and a bias distribution across the grain boundary. The voltage limitation V < 4${\Phi}$$\sub$b/ suggested by Heywang is no longer necessary in the new expression for the voltage dependence of the resistance. The pulsed voltages were applied to the PTCR ceramic specimen in order to avoid possible temperature variation during the measurement.